Baritone Telemaster Build - Fucking Finally

Guitar tech, wiring, maintenance, projects, SOS calls, and more!

Moderator: Ghost Hip

Post Reply
User avatar
CyaNitrate
experienced
experienced
Posts: 882
Joined: Wed Jun 26, 2013 11:24 pm
Location: The Desert

Re: Baritone Telemaster Build - Phase 1: Planning

Post by CyaNitrate »

neonblack wrote: I wonder if this body would be more trouble than its worth. There aren't any contours and the holes in the back look crooked.
Not that it matters at this point, but that Wilkinson bridge is both string through and top loading, so unless you were set on through body, the crooked holes wouldn't have mattered. Plug and fill them,sand some body contours, and finish.
jwar wrote:BRO! There is only one order! Bass>fuzz>fuzz>fuzz>fuzz>overdriven amp. :)
goroth wrote:Come up here and fuzz party. Yes. Fuzz party. It is a legit verb.
User avatar
neonblack
IAMILFFAMOUS
IAMILFFAMOUS
Posts: 8090
Joined: Fri Feb 28, 2014 12:00 am
Location: Wilmington, NC

Re: Baritone Telemaster Build - Phase 2: Buying/Waiting

Post by neonblack »

Yeah, I was just hesitant to take a risk. I'm just a nervous Nelly. :lol:

I'm getting that Wilkinson humbucker bridge for this one. Thanks for showing those to me. Ill definitely remember the other one for any future builds.
User avatar
CyaNitrate
experienced
experienced
Posts: 882
Joined: Wed Jun 26, 2013 11:24 pm
Location: The Desert

Re: Baritone Telemaster Build - Phase 2: Buying/Waiting

Post by CyaNitrate »

Of course! You've got me wanting to build now...
jwar wrote:BRO! There is only one order! Bass>fuzz>fuzz>fuzz>fuzz>overdriven amp. :)
goroth wrote:Come up here and fuzz party. Yes. Fuzz party. It is a legit verb.
User avatar
neonblack
IAMILFFAMOUS
IAMILFFAMOUS
Posts: 8090
Joined: Fri Feb 28, 2014 12:00 am
Location: Wilmington, NC

Re: Baritone Telemaster Build - Phase 2: Buying/Waiting

Post by neonblack »

Hey! This is still happening. Just very slowly, as I predicted.

I have the bari jazzmaster neck in my possession. The body has been so much trouble. One guy backed out on building it, and the other guy is having some trouble with his PayPal account, so he can't take my money, so the build can't continue for the moment. :picard:

Anyways, if it gets worked out, the body will be routed for a single coil neck and a bridge humbucker and I'm pretty sure I'm going to skip the volume and put the tone cap on a switch. Straight riff machine.
User avatar
CyaNitrate
experienced
experienced
Posts: 882
Joined: Wed Jun 26, 2013 11:24 pm
Location: The Desert

Re: Baritone Telemaster Build - Phase 2: Buying/Waiting

Post by CyaNitrate »

Do you have a volume pedal or a kill switch pedal? Cause if not you might want one with no volume on the guitar.
jwar wrote:BRO! There is only one order! Bass>fuzz>fuzz>fuzz>fuzz>overdriven amp. :)
goroth wrote:Come up here and fuzz party. Yes. Fuzz party. It is a legit verb.
User avatar
neonblack
IAMILFFAMOUS
IAMILFFAMOUS
Posts: 8090
Joined: Fri Feb 28, 2014 12:00 am
Location: Wilmington, NC

Re: Baritone Telemaster Build - Phase 2: Buying/Waiting

Post by neonblack »

I have a tuner that mutes. I was thinking instead of a volume knob just have a killswitch on the guitar. Not sure yet about all that.
User avatar
CyaNitrate
experienced
experienced
Posts: 882
Joined: Wed Jun 26, 2013 11:24 pm
Location: The Desert

Re: Baritone Telemaster Build - Phase 2: Buying/Waiting

Post by CyaNitrate »

That'd be cool. The only drawback would be no cleanup, or oscilation control on certain fuzzies, like AB-synth and the like. But I have a feeling those won't be a problem for you.

In the past, I've wired and SG and a Dot Studio for vol/vol, with no tone, cause I always kept it cranked anyways. However, I find myself actually using the tone knobs on my tele and strat.
jwar wrote:BRO! There is only one order! Bass>fuzz>fuzz>fuzz>fuzz>overdriven amp. :)
goroth wrote:Come up here and fuzz party. Yes. Fuzz party. It is a legit verb.
User avatar
neonblack
IAMILFFAMOUS
IAMILFFAMOUS
Posts: 8090
Joined: Fri Feb 28, 2014 12:00 am
Location: Wilmington, NC

Re: Baritone Telemaster Build - Phase 2: Buying/Waiting

Post by neonblack »

I use the tone either full blast or all the way back and I'm finding that I'd rather flick a switch for control over it.

I didn't think about oscillating fuzzes. I've been meaning to get a volume pedal anyways.
User avatar
lordgalvar
Supporter
Supporter
Posts: 6165
Joined: Fri Nov 14, 2014 5:59 pm
Location: Somewhere between ignore and the OC

Re: Baritone Telemaster Build - Phase 2: Buying/Waiting

Post by lordgalvar »

I actually prefer the tone switching too. The switching on my Welson is pretty awesome...two basic sounds (lead/rhythm), then a bass and treble mix or either, and one for either bass or treble in either mode. So like 6 different tone sounds with really different sounds on all of them.

Really neat to see what you come up with man!
-Ring Mods!
"I make you chocolate"
  • -comesect69-via-Majin Buu-by-way-of-Dirge/mtl.asm and special consideration from CA Anderton
User avatar
neonblack
IAMILFFAMOUS
IAMILFFAMOUS
Posts: 8090
Joined: Fri Feb 28, 2014 12:00 am
Location: Wilmington, NC

Re: Baritone Telemaster Build - Phase 2: Crying/Waiting

Post by neonblack »

Well this is stalling in the worst way. Took a chance on this guitar builder but it doesn't look good. Even if this body turns out perfect, the communication is so bad you'd think it's a Seppuku brand guitar.

Oh and the money is all tied up so i can't order one of the other guitar bodies I want. FUCK.
User avatar
skullservant
IAMILFFAMOUS
IAMILFFAMOUS
Posts: 16575
Joined: Wed Dec 28, 2011 12:55 am

Re: Baritone Telemaster Build - Phase 2: Crying/Waiting

Post by skullservant »

Ah that's shitty dude. I hope it gets sorted out. Can you file a claim?
User avatar
neonblack
IAMILFFAMOUS
IAMILFFAMOUS
Posts: 8090
Joined: Fri Feb 28, 2014 12:00 am
Location: Wilmington, NC

Re: Baritone Telemaster Build - Phase 2: Crying/Waiting

Post by neonblack »

Yeah, not through Reverb where I placed the order, but through PayPal. Sucks cause theres a single pickup jag body for like $80+shipping that I would totally jump on if i could
User avatar
Chankgeez
IAMILFFAMOUS
IAMILFFAMOUS
Posts: 42254
Joined: Tue Oct 11, 2011 1:40 am
Location: https://www.youtube.com/watch?v=FGhbeHujNZQ youtube.com/watch?v=V-2l7kkBURc

Re: Baritone Telemaster Build - Phase 2: Crying/Waiting

Post by Chankgeez »

neonblack wrote:… it's a Seppuku brand guitar.
Image
psychic vampire. wrote:The important take away from this thread: Taoism and Ring Modulators go together?
…...........................…
Sweet dealin's: here
"Now, of course, Strega is not a Minimoog… and I am not Sun Ra" - dude from MAKENOISE
#GreenRinger
User avatar
neonblack
IAMILFFAMOUS
IAMILFFAMOUS
Posts: 8090
Joined: Fri Feb 28, 2014 12:00 am
Location: Wilmington, NC

Re: Baritone Telemaster Build - Phase 2: Crying/Waiting

Post by neonblack »

The SS Bass?
User avatar
Chankgeez
IAMILFFAMOUS
IAMILFFAMOUS
Posts: 42254
Joined: Tue Oct 11, 2011 1:40 am
Location: https://www.youtube.com/watch?v=FGhbeHujNZQ youtube.com/watch?v=V-2l7kkBURc

Re: Baritone Telemaster Build - Phase 2: Crying/Waiting

Post by Chankgeez »

Ja.
psychic vampire. wrote:The important take away from this thread: Taoism and Ring Modulators go together?
…...........................…
Sweet dealin's: here
"Now, of course, Strega is not a Minimoog… and I am not Sun Ra" - dude from MAKENOISE
#GreenRinger
Post Reply