DIRGE ELECTRONICS: Progress/Protos/Puppies

[space6oy]

He's got an old desktop unit that runs off chips instead of springs. Wants a larger value 'time' pot, as well as a feedback loop and kill switches for each channel

I got it off of ebay for $15, so worth it!

nice! know who it was made by?

[MeSoFuzzy]

Yeah, Realistic

[space6oy]

heh nice.

[MeSoFuzzy]

The input easily distorts like a motherfucker(in a good way.) Using this box for harsh noise will be killer!

Skully, if you can make one of those shirts in purple I'll take one.

[kosta]

The way those Realistic desktop reverbs clip and distort has that good solid state grind. Love those things.

[skullservant]

MeSoFuzzy- I can make one in purple, I think. I would have to draw it in white- gonna see if I can find a white fabric marker.

Busy weekend out of town, but I'm back in the saddle tonight. Going to be adding wires to Kosta's Rocktave PCB tonight. I figure I can solder in wires in every single empty pcb hole and then figure out once they are placed which need to stay and which need to go. Either way wires need to be put in. Once I get the rocktave wired up I can drop the Green Ringer in no problem. The cool thing is that most of the potentiometers only use two of the three legs of the pots so it makes life a little bit easier.

Also going to be drilling out the enclosure for watchyourscrew's SSStampede tonight and drawing the artwork on top of it.

I got the HoofReaper in that I will be rehousing into Hoof + Octave and Reaper seperately as well, so if I have time tonight I might try to drill out that enclosure.

I apologize for everything seeming to be in super slow motion recently

[space6oy]

dude don't worry about it! your work is all much appreciated.

[MeSoFuzzy]

MeSoFuzzy- I can make one in purple, I think. I would have to draw it in white- gonna see if I can find a white fabric marker.

Fabulous! If the white fabric marker does not materialize, hot pink with black ink would be cool

This emoticon is mine

[skullservant]

Yeah I could do the hot pink with black ink. PM me.

Was able to drill draw and mount hardware on the SSStampede Deluxe last night:

'Purple Stuff' edition

[skullservant]

Last night I was able to get all of the general wiring done in the SSStampede Deluxe.
I also fixed up Space6oy's Boss CS-3 compressor which sounds AWESOME. Might have to pick one up some time

[space6oy]

*fromel modded CS-3. this amateur f'd it up in a couple spots skull spotted for me!

[hbombgraphics]

holy crap
if I had a purple stuff pedal
I would need a cola pedal and a sunny d pedal

[skullservant]

Hahahaha that would rule. Anyone else remember that company that put out Coke can Soda Meisers? OoLaLa or something like that?

Anyways, last night I got home late and drilled out the enclosure that I will be rehousing the Tone Reaper into. That's really all I had time to do other than start to carefully desolder and take the boards out of the original Hoof Reaper. They had some pretty interesting wiring techniques that were super space saving for the original pedal but now I've gotta try to figure out how to translate the Green Ringer circuit wiring into regular wiring. Shouldn't be very hard though.

Taking the night off to pass out candy to trick or treaters. Tomorrow I probably will not have much time to build because I'm going to a wedding. I should have some time on Saturday to get some things done, and probably Sunday as well at least part of the day

[skullservant]

Halloween sucked. No trick or treaters. Bummed wife. But I did get a ton of stuff done.

Started to disassemble the Hoof Reaper, and painted the enclosure:





Rehoused and painted this SHO:



Made this feedback looper and painted it:

[intothegroove]