DIRGE ELECTRONICS: Progress/Protos/Puppies

[skullservant]

Gotta do some more searching to see if I can find a diagram on freestompboxes or diystompboxes for the Rocktave.

Finished up the Ross Distortion/Phaser last night, beefed up the caps and added more gain with LED/silicon hybrid clipping

[amnesiac305]

I built a rocktave many years ago. I used this article: http://hammer.ampage.org/files/rocktave.pdf. While it seemed like a cool concept at the time, I was not so impressed. I prefer just using an octron when needed. However, I havent used it in quite awhile so maybe I should revisit.

[skullservant]

Yeah I've been studying that article up and down haha

I've even got an actual rocktave unit that Kosta lent me to take a look at. I think between the two I will be able to figure it out, but the GGG board that I used has a little bit different of a wiring scheme going on. Regardless, the pads are in about the same place on each board, I've just gotta triple check they are going to the right place on the GGG board since there are about a dozen extra holes! haha

[skullservant]

Hand drawn T-shirt

[Achtane]

HOT
DEM TEEF

[space6oy]

AWESOME!

[skullservant]

Thanks dudes!

Been really busy the past two weeks really, so I haven't been able to get a whole lot done around the shop.

Here's the list:

1. Kosta's Rocktave- figure out the wiring on the GGG board, drop the GGG board in and wire everything up.
2. SSScrewed (SSStampede) for watchyourscrew- going to have an oscillation footswitch and knob, pregain knob, gloom switch, diode switch, and a double cup.
3. Fixing a Boss Comp for space6oy
4. Rehousing a Hoof Reaper into a Hoof + Octave and Tone Reaper for one of Kosta's friends
5. Reverb mod for MeSoFuzzy

I think that's it?

[space6oy]

what's the mod to fuzzy's reverb?

[skullservant]

He's got an old desktop unit that runs off chips instead of springs. Wants a larger value 'time' pot, as well as a feedback loop and kill switches for each channel

[space6oy]

wow, i'd love to see that!

[skullservant]

Yeah I'm curious to open it up.
I REALLY need to clean up my shop area though, it's really affecting my ability to work on the bench. I might have to do that tonight before anything else cause it's stressing me out

[LaoWiz]

Hand drawn T-shirt

Fuggin great!!!!!!!!!!!!!

[kbit]

Yeah Evan that shirt is very well done. Kudos.

[MeSoFuzzy]

He's got an old desktop unit that runs off chips instead of springs. Wants a larger value 'time' pot, as well as a feedback loop and kill switches for each channel

I got it off of ebay for $15, so worth it! Cool shirt BTW, how much?

[skullservant]

Thank you all!

I'm selling shirts for $18 shipped in the US. Right now I'm using Sharpie fabric markers for them