Let's see your PEDAL BOARD!

[bongoben]

Sweeeet Dr Sci love.
What pickup do you use that won't feedback when stuff gets gainy?

I've got one of the Fishman bridge piezo pickups that we ran into an end-pin jack. As long as I am conservative with the pre-amp gain I give the mando up front throwing in extra gain for boost or fuzz hasn't been an issue.

[space6oy]

I see a micro pog
an RRR???? maybe
some diamond stuff

MXR EQ

it's an eye chart

actually if Eye charts looked like this I might get my glasses prescription updated

neon green's a tremolessence.

[hbombgraphics]

do you have a preamp on the mando or just use the PZ pre?

My alvarez has a passive pickup and it doesn't sound good at all by itself

[Bassus Sanguinis]

I did something surprising last week: a small board I put quick together for rehearsals before getting all my stuff wired again in the big board. That proved to be noisy and fuzzy enough for many songs, though some songs clearly need their dedicated fx.

Besides I had to clean up the pedals and cables properly after the latest gig and the quick wiping, we used a soap bubble machine and it all the soap floated down around me and on me. Sticky and slippery and eww. Anyway, here's the small board:

TGD > SPAE (Boss CEB-2 chorus in feedback loop with a kick disc to control the pattern it does) > The one and only STANAMANGLER > FL-9 flanger > tuner (placed after fuzz to tune oscillation between the songs when wanted) > Langtronics gated fuzz/envelope filter > McSpunckle br00tz mini (used for my 'clean' sound, a dirty boost, and for heavy metal distortion > Boss RE-20 delay-verb. Really nasty and noisy and a good deal of weirdness, too.

I'm considering building a plywood mini board for this set up and spare the room for it in the big board so I can take it on and off to home and back to rehearsals. That way I could leave most of my stuff to rehearsal place in the huge aluminum case and take it to home occasionally when I get a lift from a band member.

[hbombgraphics]

I have always wanted a detachable section of my bigger board
would you use Velcro or something else?

[Bassus Sanguinis]

I have always wanted a detachable section of my bigger board
would you use Velcro or something else?

Yeah I guess I'll be using velcro if I don't come up with something smart and cheap - velcro is supposed to keep all the pedals in anyway so why not the detachable mini board, too.

[bongoben]

do you have a preamp on the mando or just use the PZ pre?

My alvarez has a passive pickup and it doesn't sound good at all by itself

Just the PZ Pre. It works great with my acoustic guitar also (which has one of the Fishman Rare Earth Humbucker soundhole pickups installed) on the 2nd input.

[hbombgraphics]

do you have a preamp on the mando or just use the PZ pre?

My alvarez has a passive pickup and it doesn't sound good at all by itself

Just the PZ Pre. It works great with my acoustic guitar also (which has one of the Fishman Rare Earth Humbucker soundhole pickups installed) on the 2nd input.

awesome, I may have to try that

[Haki]

I did something surprising last week: a small board I put quick together for rehearsals before getting all my stuff wired again in the big board. That proved to be noisy and fuzzy enough for many songs, though some songs clearly need their dedicated fx.

Besides I had to clean up the pedals and cables properly after the latest gig and the quick wiping, we used a soap bubble machine and it all the soap floated down around me and on me. Sticky and slippery and eww. Anyway, here's the small board:


TGD > SPAE (Boss CEB-2 chorus in feedback loop with a kick disc to control the pattern it does) > The one and only STANAMANGLER > FL-9 flanger > tuner (placed after fuzz to tune oscillation between the songs when wanted) > Langtronics gated fuzz/envelope filter > McSpunckle br00tz mini (used for my 'clean' sound, a dirty boost, and for heavy metal distortion > Boss RE-20 delay-verb. Really nasty and noisy and a good deal of weirdness, too.

I'm considering building a plywood mini board for this set up and spare the room for it in the big board so I can take it on and off to home and back to rehearsals. That way I could leave most of my stuff to rehearsal place in the huge aluminum case and take it to home occasionally when I get a lift from a band member.

Mini board sounds practical enough, I wouldn't want to carry that big one of yours around using public transport.

[tommasters]

OH SHIT...

[rustywire]

OH SHIT...

KILLER.

PS: SAME GOES FOR THE BRO BONGOBEN!

[kbit]

Good gawd this & the previous page

[univalve]

[fetch]

Sweet boards on this page. My first board since coming back from EU/AU travels:



That KLONE roolz my underpants. I'm also using my new Freakin' era Danocaster and Swart.

Matamp 1224mkii is out of action till I get a 4x12.

[rustywire]

Hey uni you should try an mxr distortion+ with output dimed and distortion at 11o'clock

Sweet boards on this page. My first board since coming back from EU/AU travels:



That KLONE roolz my underpants. I'm also using my new Freakin' era Danocaster and Swart.

Matamp 1224mkii is out of action till I get a 4x12.

AC10 BROS.

I've dangled mine as trade fodder for over a month with no bites. Looks like I'm keeping it.
FINE THATS FINE.

And your board too. VERY FINE LIKE A JUICE DRINK.
I want a klone.

Edit: AND SWART