Let's see your finished DIY projects!

[nieh]

Big Muff rehouse. Need to get matching knobs though.

[The4455]

Big Muff rehouse. Need to get matching knobs though.

Cool, how hard was it? Also do you think I could do the same thing to a russian big muff, black re-issue?

[nieh]

Big Muff rehouse. Need to get matching knobs though.

Cool, how hard was it? Also do you think I could do the same thing to a russian big muff, black re-issue?

Was pretty easy. Only hard this was rewiring new pots because they're surface mounted, and the board is pretty long. and probably. You would have to replace the jacks though.

[eatyourguitar]

I have a pigeon fx vintage muff pcb that doesnt fit in a 1590BB. I would buy that enclosure off you for the germanium triangle im building.

[nieh]

I have a pigeon fx vintage muff pcb that doesnt fit in a 1590BB. I would buy that enclosure off you for the germanium triangle im building.

It has two holes drilled by the input for switches...

[John Lyons]

[ashdown]

love the giant led?

[ARC Effects]

John - can you elaborate on your screen print methods? I'm looking to add graphics to my pedals and wondering where I should start.

[LaoWiz]

Supersick!

[John Lyons]

John - can you elaborate on your screen print methods? I'm looking to add graphics to my pedals and wondering where I should start.

I use waterslide decals.
Fairly simple, just add practice. 8x10 sheets are $2 from smallbear.
I use the laser decals.

[Wes Mantooth]

I have such GAS for some Basic Audio right now!

Would love a custom zippy in one of those wedge enclosures!

[Pollinator95]

I´ve been waiting for someone to post a bad-looking pedal so the contrast isn´t too bad, but looks like it´s not going to happen.

Red Llama Clone




It´s my first build, so I´m pleased that it at least works.

[eatyourguitar]

Red Llama Clone

glad you got it working. you might want to put the board closer to the pots next time if you have 3 pots and they all go directly to the board. there is a trick too if you have a vol pot at the end of the circuit for example. you could run 3 wires from the board to the pot and the output from the board to the switch. thats 4 wires. or you could just take the lug 3 from the board and wire it to the vol pot. the other lugs of the vol pot go to the switch and lug 1 to ground. thats 3 wires instead of 4 but only 1 wire that connects to the board. MUuuuuch cleaner in most cases.

[John Lyons]

[youtube]http://www.youtube.com/watch?v=e3HnyD5BOqg[/youtube]

[Rygot]

For another ILF'er.

FY2 with added 2 knob tone stack and scoop trim > Green Ringer