Mon Sep 06, 2021 5:26 am
roloshingshing wrote:Does anyone know if the internal gain trim pot is present on the rev m pcbs?
Wed Sep 08, 2021 6:12 pm
gila_crisis wrote:
Btw, any update about the firmware update for Rev.m 0.97 to fix the Mode 3?
Thu Sep 09, 2021 12:57 pm
changes/fixes over .97m :
Fixed: mode 3, q switch held down, DIR 1 does not adjust read head 1 volume.
Fixed: mode 3, q switch held up, does not set step sequencer parameters (any knob).
Changed: mode 3 recording style more similar to .963k/no playback even when memory space wraps.
Sun Sep 12, 2021 12:41 pm
Sun Sep 12, 2021 1:23 pm
cosmicevan wrote:I imagine we would just follow the same procedure outlined here - https://mtlasm.com/count-to-5-firmware-update/ but with the .971m update? Any specific HW or things that we need to check to ensure it will work on our Ct5? I got mine a few years ago, but I think it has the latest firmware that isn't nightly.
Wed Sep 15, 2021 7:40 am
multi_s wrote:here is the .971m update
- Code:
changes/fixes over .97m :
Fixed: mode 3, q switch held down, DIR 1 does not adjust read head 1 volume.
Fixed: mode 3, q switch held up, does not set step sequencer parameters (any knob).
Changed: mode 3 recording style more similar to .963k/no playback even when memory space wraps.
Wed Sep 15, 2021 11:25 am
gila_crisis wrote:multi_s wrote:here is the .971m update
- Code:
changes/fixes over .97m :
Fixed: mode 3, q switch held down, DIR 1 does not adjust read head 1 volume.
Fixed: mode 3, q switch held up, does not set step sequencer parameters (any knob).
Changed: mode 3 recording style more similar to .963k/no playback even when memory space wraps.
great, thank you!!!
May I suggest you to update the information also on your website?
Wed Sep 15, 2021 5:06 pm
multi_s wrote:yes i will update the website soon. for now you can get it at this link though.
thanks
Sat Sep 18, 2021 10:35 am
gila_crisis wrote:multi_s wrote:yes i will update the website soon. for now you can get it at this link though.
thanks
thank you! Would it be possible in a future update to make CT5 be able to remember also the secondary parameters or due to the hardware used is it not possible at all?
Btw great pedal, now Mode3 is working perfectly!
Tue Oct 05, 2021 9:33 am
Wed Oct 06, 2021 10:08 am
t. dagarim wrote:Just received my C25.
She knows truths that I cannot yet understand.
She has seen mysteries, dimensions, time.
She speaks in riddles echoing in the labyrinth, jewels of sound, distant but warm.
I know where this leads.
I accept.
Fri Oct 08, 2021 1:34 pm
Fri Oct 08, 2021 9:02 pm
Sat Oct 09, 2021 12:11 am
elefontpress wrote:That’s where I’ve got mine!
Sat Oct 09, 2021 12:12 am
t. dagarim wrote:Just received my C25.
She knows truths that I cannot yet understand.
She has seen mysteries, dimensions, time.
She speaks in riddles echoing in the labyrinth, jewels of sound, distant but warm.
I know where this leads.
I accept.