roloshingshing wrote:Does anyone know if the internal gain trim pot is present on the rev m pcbs?
I openend my Rev.M and inside there's no trim pot.
Btw, any update about the firmware update for Rev.m 0.97 to fix the Mode 3?
Moderator: multi_s
roloshingshing wrote:Does anyone know if the internal gain trim pot is present on the rev m pcbs?
gila_crisis wrote:
Btw, any update about the firmware update for Rev.m 0.97 to fix the Mode 3?
changes/fixes over .97m :
Fixed: mode 3, q switch held down, DIR 1 does not adjust read head 1 volume.
Fixed: mode 3, q switch held up, does not set step sequencer parameters (any knob).
Changed: mode 3 recording style more similar to .963k/no playback even when memory space wraps.
cosmicevan wrote:I imagine we would just follow the same procedure outlined here - https://mtlasm.com/count-to-5-firmware-update/ but with the .971m update? Any specific HW or things that we need to check to ensure it will work on our Ct5? I got mine a few years ago, but I think it has the latest firmware that isn't nightly.
multi_s wrote:here is the .971m update
- Code: Select all
changes/fixes over .97m :
Fixed: mode 3, q switch held down, DIR 1 does not adjust read head 1 volume.
Fixed: mode 3, q switch held up, does not set step sequencer parameters (any knob).
Changed: mode 3 recording style more similar to .963k/no playback even when memory space wraps.
gila_crisis wrote:multi_s wrote:here is the .971m update
- Code: Select all
changes/fixes over .97m :
Fixed: mode 3, q switch held down, DIR 1 does not adjust read head 1 volume.
Fixed: mode 3, q switch held up, does not set step sequencer parameters (any knob).
Changed: mode 3 recording style more similar to .963k/no playback even when memory space wraps.
great, thank you!!!
May I suggest you to update the information also on your website?
multi_s wrote:yes i will update the website soon. for now you can get it at this link though.
thanks
gila_crisis wrote:multi_s wrote:yes i will update the website soon. for now you can get it at this link though.
thanks
thank you! Would it be possible in a future update to make CT5 be able to remember also the secondary parameters or due to the hardware used is it not possible at all?
Btw great pedal, now Mode3 is working perfectly!
t. dagarim wrote:Just received my C25.
She knows truths that I cannot yet understand.
She has seen mysteries, dimensions, time.
She speaks in riddles echoing in the labyrinth, jewels of sound, distant but warm.
I know where this leads.
I accept.
elefontpress wrote:That’s where I’ve got mine!
t. dagarim wrote:Just received my C25.
She knows truths that I cannot yet understand.
She has seen mysteries, dimensions, time.
She speaks in riddles echoing in the labyrinth, jewels of sound, distant but warm.
I know where this leads.
I accept.
Users browsing this forum: No registered users and 13 guests