STAMP AMP ORDERERING THREAD! (Ordering Extended til 10/25)
Posted: Fri Sep 25, 2009 7:18 pm
UPDATE 10/20 - If your a late comer, feel free and send in an order, I'll extend the ordering period until 10/25.
Greetings! This thread explains all you need to do to order yourself one of the Limited Custom Run "STAMP AMP".
The Stamp Amp is/will be a 1/2 watt 386 IC based amplifier to be used in conjunction with a speaker cabinet. You can also run it inline like an effect for distortion sounds.
The features and specs of the Stamp Amp will be as follows:
-Input Jack
-Power Toggle Switch
-Gain Toggle Switch (switches between high and low gain. internal trimpot adjust amount of gain in high gain setting)
-Voice Toggle Switch (tighter/warmer/more fidelity OR brighter/more aggressive)
-Speaker/Output Jack (drives 4, 8, or 16 ohm cabinet or can be used as an effect)
-9 volt battery operation
As with previous custom runs, you get to choose your colors. The Stamp Amp lets you choose four different colors
TO ORDER:
1. Send a payment of $40 plus shipping and handling via PayPal to eric@letsgocoyote.com
2. Stereo Pair Discount > Buy two identically colored Stamp Amps for $75 plus shipping and handling (Two different color schemes is $40 + $40 + shipping and handling)
3. Shipping and Handling is up to you. Consider things like organization of the project, actual shipping costs, packing materials, etc. as well as where you are in the world! Pay what you can afford and/or think is fair. I'll trust you guys no questions asked, so don't throw out bad vibes.
4. Choose 4 colors, as shown in the diagram. To keep things simplest for me, I will only accept color selections in RGB format! You can use this link in picking out your colors based on RGB codes:
http://www.minuta.dk/RGBviewer/
With your PayPal payment, specify your color choices in the special instructions box as Color 1: X,X,X Color 2: X,X,X Color 3: X,X,X Color 4: X,X,X
Keep in mind your pedal will look best if Color 1 is similar but darker than Color 2, and if Color 4 is similar but darker than Color 3. I am not responsible for puky color schemes!
5. Please include your I Love Fuzz Dot Com username in the special instructions as well
I will accept orders from now until OCTOBER 17th. Of all the orders placed by that date, I will round up the totally amount to the nearest ten. So if we have 37 orders by October 17th, then I will be building a total of 40, so there may (or may not) be a few spots left over for late comers. However, there is an absolute cap at 50, as that is the most I can produce.
IF at least 30 orders are placed, then I will, either by some contest or drawing, give away the first prototype amp cabinet I built (the blue one) to one person, loaded with a 10 inch speaker, for use with their Stamp Amp. I am open to suggestions as how to decide who gets it, if it comes to it.
After all the ordering is taken care of, all parts will be ordered, and then building should commence the beginning of November, with an estimated December delivery
I'd note that the CC/DC pedals took along time, but with this design I think the wait will be much avoided because there isn't alot of tedious footswitch wiring. In fact, there is very few flying leads to solder, just 4 in fact (6 if you count the battery clip), so it will speed things up.
P.S. Remember, this is supposed to be a fun, custom, limited product, but most importantly, it is a TOY, so don't take it too seriously
Greetings! This thread explains all you need to do to order yourself one of the Limited Custom Run "STAMP AMP".
The Stamp Amp is/will be a 1/2 watt 386 IC based amplifier to be used in conjunction with a speaker cabinet. You can also run it inline like an effect for distortion sounds.
The features and specs of the Stamp Amp will be as follows:
-Input Jack
-Power Toggle Switch
-Gain Toggle Switch (switches between high and low gain. internal trimpot adjust amount of gain in high gain setting)
-Voice Toggle Switch (tighter/warmer/more fidelity OR brighter/more aggressive)
-Speaker/Output Jack (drives 4, 8, or 16 ohm cabinet or can be used as an effect)
-9 volt battery operation
As with previous custom runs, you get to choose your colors. The Stamp Amp lets you choose four different colors
TO ORDER:
1. Send a payment of $40 plus shipping and handling via PayPal to eric@letsgocoyote.com
2. Stereo Pair Discount > Buy two identically colored Stamp Amps for $75 plus shipping and handling (Two different color schemes is $40 + $40 + shipping and handling)
3. Shipping and Handling is up to you. Consider things like organization of the project, actual shipping costs, packing materials, etc. as well as where you are in the world! Pay what you can afford and/or think is fair. I'll trust you guys no questions asked, so don't throw out bad vibes.
4. Choose 4 colors, as shown in the diagram. To keep things simplest for me, I will only accept color selections in RGB format! You can use this link in picking out your colors based on RGB codes:
http://www.minuta.dk/RGBviewer/
With your PayPal payment, specify your color choices in the special instructions box as Color 1: X,X,X Color 2: X,X,X Color 3: X,X,X Color 4: X,X,X
Keep in mind your pedal will look best if Color 1 is similar but darker than Color 2, and if Color 4 is similar but darker than Color 3. I am not responsible for puky color schemes!
5. Please include your I Love Fuzz Dot Com username in the special instructions as well
I will accept orders from now until OCTOBER 17th. Of all the orders placed by that date, I will round up the totally amount to the nearest ten. So if we have 37 orders by October 17th, then I will be building a total of 40, so there may (or may not) be a few spots left over for late comers. However, there is an absolute cap at 50, as that is the most I can produce.
IF at least 30 orders are placed, then I will, either by some contest or drawing, give away the first prototype amp cabinet I built (the blue one) to one person, loaded with a 10 inch speaker, for use with their Stamp Amp. I am open to suggestions as how to decide who gets it, if it comes to it.
After all the ordering is taken care of, all parts will be ordered, and then building should commence the beginning of November, with an estimated December delivery
I'd note that the CC/DC pedals took along time, but with this design I think the wait will be much avoided because there isn't alot of tedious footswitch wiring. In fact, there is very few flying leads to solder, just 4 in fact (6 if you count the battery clip), so it will speed things up.
P.S. Remember, this is supposed to be a fun, custom, limited product, but most importantly, it is a TOY, so don't take it too seriously
