Re: BAKVENDT - ILF Reverse Delay Thing!
Posted: Thu Sep 05, 2019 5:31 pm
UC: Behold, the obelus! https://en.wikipedia.org/wiki/Obelus
Page 34 of 58
Re: BAKVENDT - ILF Reverse Delay Thing!
Posted: Thu Sep 05, 2019 8:27 pm
I mean, my math grades were never top of the class.
Re: BAKVENDT - ILF Reverse Delay Thing!
Posted: Sat Sep 07, 2019 8:25 pm
I'm just quoting this because I like picturing the copper lettering oxidizing due to finger sweat.Pladask wrote:Some progress!
SMD circuitboard (minus the header pins) for easy pre-fab in case I decide to make a few. The orange lettering is untreated exposed copper. Apparently it will oxidate to a light green color over time (like a copper statue). Haven't yet tested any of the new software. Will probably have the hardware ready this month and start testing software stuff once that's ready. Production maybe November or next year.
And there will be lots of sweat... this lots hot!
Re: BAKVENDT - ILF Reverse Delay Thing!
Posted: Sun Sep 08, 2019 3:46 am
Possibly stupid question: are there tails on this?
Re: BAKVENDT - ILF Reverse Delay Thing!
Posted: Sun Sep 08, 2019 5:31 am
No, but there is relay bypass operated with momentary footswitchesgoroth wrote:Possibly stupid question: are there tails on this?
Re: BAKVENDT - ILF Reverse Delay Thing!
Posted: Sat Oct 05, 2019 9:49 pm
With the octave and grain direction options moved from hardware switches to digital controls, will settings persist after power off/on?
One great thing about switches is you can leave your settings the way you like them without doing the same configuration pattern every time you turn on your rig. Could the pedal retain the last settings on power up, like a switch would?
One great thing about switches is you can leave your settings the way you like them without doing the same configuration pattern every time you turn on your rig. Could the pedal retain the last settings on power up, like a switch would?
Re: BAKVENDT - ILF Reverse Delay Thing!
Posted: Sun Oct 06, 2019 8:15 am
Doh just realized you already said it would retain the mode. As you were!
So excited for this pedal!Pladask wrote:
The pedal will remember the current mode and bring it back next time the pedal is turned on.
Re: BAKVENDT - ILF Reverse Delay Thing!
Posted: Mon Oct 07, 2019 5:05 pm
Yeah the idea is to have the pedal remember the setting. The plan is to ditch the grain direction option and replace it with a stretching direction option (forw/rev).
Re: BAKVENDT - ILF Reverse Delay Thing!
Posted: Mon Oct 07, 2019 7:45 pm
Stretching direction is perfect!
Re: BAKVENDT - ILF Reverse Delay Thing!
Posted: Fri Oct 11, 2019 1:58 am
I've been really into using the freeze on Bakvendt lately: https://clyp.it/5h3gfdai
Re: BAKVENDT - ILF Reverse Delay Thing!
Posted: Fri Oct 11, 2019 1:49 pm
Enjoyed that quite a bit. Thanks for sharingHeraclitus Akimbo wrote:I've been really into using the freeze on Bakvendt lately: https://clyp.it/5h3gfdai
Re: BAKVENDT - ILF Reverse Delay Thing!
Posted: Fri Oct 11, 2019 5:45 pm
Nice!Heraclitus Akimbo wrote:I've been really into using the freeze on Bakvendt lately: https://clyp.it/5h3gfdai
Re: BAKVENDT - ILF Reverse Delay Thing!
Posted: Mon Oct 14, 2019 8:48 am
Nice one! Some boards arriving tomorrow that will let me test a physical limitations. If any of these are acceptable I'll likely be able to draw up all the necessary layouts to order boxes and pcb/pcba before NovemberHeraclitus Akimbo wrote:I've been really into using the freeze on Bakvendt lately: https://clyp.it/5h3gfdai
Re: BAKVENDT - ILF Reverse Delay Thing!
Posted: Mon Oct 14, 2019 11:01 am
Wait does this mean I get a second chance at buying one of these?
Re: BAKVENDT - ILF Reverse Delay Thing!
Posted: Mon Oct 14, 2019 1:04 pm
You better believe it!Jwar wrote:Wait does this mean I get a second chance at buying one of these?