No sir, you are not...jrmy wrote:Am I the only one freaking out about that phaser? Because I am totally freaking out about that phaser.
Gasalcoholics anonymous? whoever said this was a help group?
Moderator: Ghost Hip
- fever606
- IAMILF

- Posts: 2764
- Joined: Sun Jul 25, 2010 11:03 pm
- Location: district of columbia
Re: What is in the post? The thread of and for GAS!
- Inconuucl
- Supporter

- Posts: 6407
- Joined: Mon Jul 28, 2014 9:35 pm
- Location: Boston, MA
Re: What is in the post? The thread of and for GAS!
Can you run them both into each other?Uncle Grandfather wrote:Yeah, i just dont have the ancillary gear that the b/s/t seller has with hisgoroth wrote:But do you have Schumanns?Uncle Grandfather wrote:I've already got a Schumanngoroth wrote:Hey UG, nab the Schumann in the BST and do a shootout![]()
I was thinking of doing a comparison demo with those two and the MIni-Ark.
PLlone the PLLone that doesn't PLLone.![]()
BTW, does anybody know what type of power supply the Pearl PH-44 uses...its an 18VDC but it doesn't say + or - and I can't find any info online and wouldn't know how to figure it out from looking at a schematic. Any help appreciated, of course it runs of two 9v batteries too but I would like the option.
- chuckjaywalk
- IAMILF

- Posts: 2134
- Joined: Tue Dec 18, 2012 11:28 am
- Location: Florence, KY
Re: What is in the post? The thread of and for GAS!
Out: Blackstar HT-1RH, 112 cabinet, Fuzzhugger Arc Flash, Fuzzhugger Great Wall, Aphex Punch Factory
In: Rivera R-55 112, MXR Blue Box
Out: Industrialectric Incinerator
In: Catalinbread Echorec
I'm so close to my ideal board. So goddamn close.
In: Rivera R-55 112, MXR Blue Box
Out: Industrialectric Incinerator
In: Catalinbread Echorec
I'm so close to my ideal board. So goddamn close.
My force of habit, I am an insect
I have to confess I'm proud as hell of that fact
I have to confess I'm proud as hell of that fact
- UglyCasanova
- IAMILFFAMOUS

- Posts: 12554
- Joined: Mon Jul 28, 2014 6:47 am
- Location: Norway
Re: What is in the post? The thread of and for GAS!
Ditto, in reverse.chuckjaywalk wrote: Out: Industrialectric Incinerator
In: Catalinbread Echorec
iRerror:
http://irerror.bandcamp.com
http://irerror.bandcamp.com
- resincum
- Supporter

- Posts: 3883
- Joined: Fri Oct 24, 2014 12:30 am
- Location: el paso
Re: What is in the post? The thread of and for GAS!
I don't think a negative should fit if it's positive? at least that's how my center positive power pedals areUncle Grandfather wrote:Yeah, i just dont have the ancillary gear that the b/s/t seller has with hisgoroth wrote:But do you have Schumanns?Uncle Grandfather wrote:I've already got a Schumanngoroth wrote:Hey UG, nab the Schumann in the BST and do a shootout![]()
I was thinking of doing a comparison demo with those two and the MIni-Ark.
PLlone the PLLone that doesn't PLLone.![]()
BTW, does anybody know what type of power supply the Pearl PH-44 uses...its an 18VDC but it doesn't say + or - and I can't find any info online and wouldn't know how to figure it out from looking at a schematic. Any help appreciated, of course it runs of two 9v batteries too but I would like the option.
i'm glad i can call you a friend. even if i'll never see you again


- Uncle Grandfather
- IAMILFFAMOUS

- Posts: 8550
- Joined: Mon Oct 14, 2013 7:34 pm
Re: What is in the post? The thread of and for GAS!
Inconuucl wrote:Can you run them both into each other?![]()
cool, i'll have to check.resincum wrote: I don't think a negative should fit if it's positive? at least that's how my center positive power pedals are
here is a link to the schematic if anyone can tell from it, thanks
http://www5b.biglobe.ne.jp/~houshu/synth/Ph44core.gif
- fcknoise
- IAMILFFAMOUS

- Posts: 4008
- Joined: Sun Oct 19, 2014 4:01 pm
- Location: Stockholm
- Contact:
Re: What is in the post? The thread of and for GAS!
Not exactly incoming, but I started building a spring reverb unit today, with this guide: http://m.instructables.com/id/DIY-Spring-Reverb/
I'm gonna use a danelectro honeytone as an amp, and when you dime the overdrive you get some sweet fuzz. The end is gonna be boosted by a Echoplex preamp. Gonna make it look like a small amp head, paint it and name it "spring reverberating fuzz machine". The idea in my head feels amazing and I'm stoked, buut if I know my self it's gon look like shit, whatever
I'm gonna use a danelectro honeytone as an amp, and when you dime the overdrive you get some sweet fuzz. The end is gonna be boosted by a Echoplex preamp. Gonna make it look like a small amp head, paint it and name it "spring reverberating fuzz machine". The idea in my head feels amazing and I'm stoked, buut if I know my self it's gon look like shit, whatever
Cydonia wrote: Too bad no one here is interested in talking about "gear"
BossMann73 wrote:I didn't insult it......I "curated" a "different aesthetic.".
Soundcloud: https://soundcloud.com/sharkmovieappriciatorJohn wrote:I love how this forum has the GDP of Switzerland in pedals but the collective value of everyone's patch cables is less than the change in my couch cushions. And I don't have a couch.
Bandcamp: https://fcknoise.bandcamp.com/
- backwardsvoyager
- IAMILFFAMOUS

- Posts: 4215
- Joined: Wed Nov 21, 2012 4:52 am
- neonblack
- IAMILFFAMOUS

- Posts: 8090
- Joined: Fri Feb 28, 2014 12:00 am
- Location: Wilmington, NC
Re: What is in the post? The thread of and for GAS!
Awwww yeah. Warped Vinyl incoming.
- resincum
- Supporter

- Posts: 3883
- Joined: Fri Oct 24, 2014 12:30 am
- Location: el paso
Re: What is in the post? The thread of and for GAS!
dibs on flip?????????? 
i'm glad i can call you a friend. even if i'll never see you again


- Inconuucl
- Supporter

- Posts: 6407
- Joined: Mon Jul 28, 2014 9:35 pm
- Location: Boston, MA
Re: What is in the post? The thread of and for GAS!
I have a polytope with your name on it when you feel like switching back.neonblack wrote:Awwww yeah. Warped Vinyl incoming.
- Chankgeez
- IAMILFFAMOUS

- Posts: 42254
- Joined: Tue Oct 11, 2011 1:40 am
- Location: https://www.youtube.com/watch?v=FGhbeHujNZQ youtube.com/watch?v=V-2l7kkBURc
Re: What is in the post? The thread of and for GAS!
http://www.ebay.com/itm/like/2718477781 ... rmvSB=trueUncle Grandfather wrote:cool, i'll have to check.resincum wrote: I don't think a negative should fit if it's positive? at least that's how my center positive power pedals are
here is a link to the schematic if anyone can tell from it, thanks![]()
http://www5b.biglobe.ne.jp/~houshu/synth/Ph44core.gif
I think it's center negative, but I'm not totally sure.
…...........................…psychic vampire. wrote:The important take away from this thread: Taoism and Ring Modulators go together?
Sweet dealin's: here
"Now, of course, Strega is not a Minimoog… and I am not Sun Ra" - dude from MAKENOISE
#GreenRinger
- neonblack
- IAMILFFAMOUS

- Posts: 8090
- Joined: Fri Feb 28, 2014 12:00 am
- Location: Wilmington, NC
Re: What is in the post? The thread of and for GAS!
Hah! Third times a charm, right?Inconuucl wrote:I have a polytope with your name on it when you feel like switching back.neonblack wrote:Awwww yeah. Warped Vinyl incoming.![]()
- Uncle Grandfather
- IAMILFFAMOUS

- Posts: 8550
- Joined: Mon Oct 14, 2013 7:34 pm
Re: What is in the post? The thread of and for GAS!
Thanks, a seller on reverb of a Pearl AD-33 w/ power supply let me know it uses negative center so I'm going to assume the pH-44 does also. Thanks again!Chankgeez wrote:http://www.ebay.com/itm/like/2718477781 ... rmvSB=trueUncle Grandfather wrote:cool, i'll have to check.resincum wrote: I don't think a negative should fit if it's positive? at least that's how my center positive power pedals are
here is a link to the schematic if anyone can tell from it, thanks![]()
http://www5b.biglobe.ne.jp/~houshu/synth/Ph44core.gif
I think it's center negative, but I'm not totally sure.
Edit: yep it's center negative. WOW what a versatile phaser
- Warpsmasher
- FAMOUS

- Posts: 1340
- Joined: Tue Jan 24, 2012 2:46 am
- Location: AZ
Re: What is in the post? The thread of and for GAS!
RP360 should be here tomorrow or the day after!
Mainly got it to simulate dual amps alongside my Tech 21 Tri-OD. Also looking forward to the new filter flanger effect, and the infinite wah, with a compressor whenever I want.
I've been missing having a mini-multi on the floor ever since I sold my M9 and started going rack for all my non-dirt. This is going to be the perfect replacement, and has the amps, something the M9 was sorely missing.
Mainly got it to simulate dual amps alongside my Tech 21 Tri-OD. Also looking forward to the new filter flanger effect, and the infinite wah, with a compressor whenever I want.
I've been missing having a mini-multi on the floor ever since I sold my M9 and started going rack for all my non-dirt. This is going to be the perfect replacement, and has the amps, something the M9 was sorely missing.
