ilovefuzz.com

Took a few minutes to bring this wah that Amorphus gave me back to life. It's a Thomas Organ wah, so its older.
Added true bypass with a new 3DPT, rewired the entire thing, added purple LED for dat HAZE, added DC jack, swapped out the input resistor for unity volume.
Sounds AMAZING.

That is sick!

It seriously the raddest wah I've ever played. Like SUPER funky

Managed to get a lot done today on one of my first uninterrupted, no-plans days in months.

Bassus' delay is 100% complete and packed up. The blend control was acting funky so I rebuilt it and it works perfectly.




Also got a lot of wiring done on Rot Gut's WSG. Finished 95% of the off board wiring, which was nice. I also put together the SHO circuit except for one cap.
I drilled the enclosure for standoffs, and I believe all I've got to do at this point is start the PCB to enclosure wiring.



Lastly I rehoused a 1776 Rub A Dub that I had built into an old Holy Grail enclosure because I didn't know what else to put in the enclosure other than a verb.



Also been brewing up and scheming for my submission into the ILF2012 DIY competition. I've got a few ideas in my head and up my sleeve...

skullservant wrote:Managed to get a lot done today on one of my first uninterrupted, no-plans days in months.

Bassus' delay is 100% complete and packed up. The blend control was acting funky so I rebuilt it and it works perfectly.

you certainly made the stretch and fitted it all in, many thanks for that!

No problem dude! There is actually a layer of dense cardboard under the PCB and the board is wired with 24 gauge wire that I soldered completely as to make it solid so the PCB can't move at all!! It was a little bit of a squeeze for the vertical layout but I figured it was more board friendly this way!

skullservant wrote:No problem dude! There is actually a layer of dense cardboard under the PCB and the board is wired with 24 gauge wire that I soldered completely as to make it solid so the PCB can't move at all!! It was a little bit of a squeeze for the vertical layout but I figured it was more board friendly this way!

Yep, as You guessed I appereciate that VERY much with my already crammed board thank You Evan for being such a considerate guy - with the footswitches too, since they look as user friendly as a tap dancers pedalboard can be.

No problem dude! I also elevated the time select (middle footswitch) and lowered the front two footswitches the most that I could so that you didn't accidentally step on anything either!

skullservant wrote:No problem dude! I also elevated the time select (middle footswitch) and lowered the front two footswitches the most that I could so that you didn't accidentally step on anything either!

Yep, noticed that. As I said, that all is very considerate of You, to have worked on such a minute details with my needs.

In the name of DELAY DELAY DELAY DELAY DELAY

skullservant wrote:No problem dude! I also elevated the time select (middle footswitch) and lowered the front two footswitches the most that I could so that you didn't accidentally step on anything either!

I think it's excited to meet you.

hhahahahahhahahahah delay boner

So I should have a demo of the Tonal Fucking Destruction soon

I took a little break from guitar so I'm still getting the hang of it, just spent an hour exploring all of the tonal combinations with it plus other fuzzes

Rad, mad, and bad - we're expecting nothing less from that.