DIRGE ELECTRONICS: Progress/Protos/Puppies

[skullservant]

Took a few minutes to bring this wah that Amorphus gave me back to life. It's a Thomas Organ wah, so its older.
Added true bypass with a new 3DPT, rewired the entire thing, added purple LED for dat HAZE, added DC jack, swapped out the input resistor for unity volume.
Sounds AMAZING.

[Officer Bukowski]

That is sick!

[skullservant]

It seriously the raddest wah I've ever played. Like SUPER funky

[skullservant]

Managed to get a lot done today on one of my first uninterrupted, no-plans days in months.

Bassus' delay is 100% complete and packed up. The blend control was acting funky so I rebuilt it and it works perfectly.




Also got a lot of wiring done on Rot Gut's WSG. Finished 95% of the off board wiring, which was nice. I also put together the SHO circuit except for one cap.
I drilled the enclosure for standoffs, and I believe all I've got to do at this point is start the PCB to enclosure wiring.



Lastly I rehoused a 1776 Rub A Dub that I had built into an old Holy Grail enclosure because I didn't know what else to put in the enclosure other than a verb.



Also been brewing up and scheming for my submission into the ILF2012 DIY competition. I've got a few ideas in my head and up my sleeve...

[Bassus Sanguinis]

Managed to get a lot done today on one of my first uninterrupted, no-plans days in months.

Bassus' delay is 100% complete and packed up. The blend control was acting funky so I rebuilt it and it works perfectly.

you certainly made the stretch and fitted it all in, many thanks for that!

[skullservant]

No problem dude! There is actually a layer of dense cardboard under the PCB and the board is wired with 24 gauge wire that I soldered completely as to make it solid so the PCB can't move at all!! It was a little bit of a squeeze for the vertical layout but I figured it was more board friendly this way!

[Bassus Sanguinis]

No problem dude! There is actually a layer of dense cardboard under the PCB and the board is wired with 24 gauge wire that I soldered completely as to make it solid so the PCB can't move at all!! It was a little bit of a squeeze for the vertical layout but I figured it was more board friendly this way!

Yep, as You guessed I appereciate that VERY much with my already crammed board thank You Evan for being such a considerate guy - with the footswitches too, since they look as user friendly as a tap dancers pedalboard can be.

[skullservant]

No problem dude! I also elevated the time select (middle footswitch) and lowered the front two footswitches the most that I could so that you didn't accidentally step on anything either!

[Bassus Sanguinis]

No problem dude! I also elevated the time select (middle footswitch) and lowered the front two footswitches the most that I could so that you didn't accidentally step on anything either!

Yep, noticed that. As I said, that all is very considerate of You, to have worked on such a minute details with my needs.

[skullservant]

In the name of DELAY DELAY DELAY DELAY DELAY

[mathias]

No problem dude! I also elevated the time select (middle footswitch) and lowered the front two footswitches the most that I could so that you didn't accidentally step on anything either!

I think it's excited to meet you.

[skullservant]

hhahahahahhahahahah delay boner

[Wes Mantooth]

So I should have a demo of the Tonal Fucking Destruction soon

I took a little break from guitar so I'm still getting the hang of it, just spent an hour exploring all of the tonal combinations with it plus other fuzzes

[skullservant]

[Bassus Sanguinis]

Rad, mad, and bad - we're expecting nothing less from that.