Re: Let's see your PEDAL BOARD!
Posted: Sun Jul 27, 2014 3:54 pm
cool pic, what'd you snap that with?tomlane95 wrote:ooooh, hows the dba?Ragged Trousers wrote:Been 'gazin'![]()
cool pic, what'd you snap that with?tomlane95 wrote:ooooh, hows the dba?Ragged Trousers wrote:Been 'gazin'![]()
This is awesomeRagged Trousers wrote:Been 'gazin'![]()
Ah, right, I just thought that one of your loopers had to be in front of the Xerograph because in the video it seems you're looping a line and influencing it afterwards with the filter, that's why.elevenstrings wrote:There's two loopers in the front... The MIDI controller controls the looper on the TimeLine (that's the looper in the video) and the Boomerang has a lot of looper options too and I can loop loops as the Timeline is in front of the Boomerang... additionally, the Revolver and the Raptio can act like loopers so they go in order from shortest to longest - 100ms, 1 second, 30 seconds, 20+ minutes. I would probably have used the Boomerang normally instead of the TimeLine for something like that, but the camera was right in the way so I couldn't fit my foot over that far without knocking the camera over.Tristan wrote: Really cool indeed, especially the Arpanoid with the Possessed!
I guess you have the looper in front right, or how exactly is your pedalboard / signal chain wired?
Hopefully, this makes sense for signal flow. It seems kinda weird but there's a functional reason for it. Again, the 125b pedals are meant to be swapped in and out as needed. Going forward I'm focusing on mainly getting pedals in that size that have in/out and power on the top of the pedal.
ipad app called Rookiespace6oy wrote: cool pic, what'd you snap that with?

not lacking gaincedarskies wrote:SSBS comparison board. DL4 -> Mini -> TAFM -> Fuck
Likin the TAFM for bass![]()
Thanks dude. It's actually an FM4 but same difference.Fuzz_Pi wrote:Awesome DL4 and all around awesome board
They stack pretty well! I set the elements pretty high gain for a lot of sustain and feedback that gets way over the top (in a good way) when standing near the amp but the way the bias control works on the buzz lets it act kinda like a weak gate so if you run the elements into it they just fight each other and depending on how you play it can sound smooth-ish or just squeal and grind. So cool.osbornkt wrote:That is a great board. That Buzz/Elements combo must be killer!
+1 on the DL4, damn! sharp!Fuzz_Pi wrote:Awesome DL4 and all around awesome board