Page 148 of 408
Re: Let's see your finished DIY projects!
Posted: Wed Feb 22, 2012 11:14 am
by jfrey
cloudscapes wrote:
Are you selling these? I want one.
Re: Let's see your finished DIY projects!
Posted: Thu Feb 23, 2012 1:27 pm
by Rygot
Very, very modified DOD 440 made for someone here on the forum.
Knobs: Level, Range, Resonance, Attack Time, Volume.
Switches: Manual Sweep/Auto Sweep, Decay Time, Lower Sweep.
Extra jack: Disables treadle, adds in a box to control either the manual sweep or sweep starting point via photocell.
- Toggle on little box to switch between external photocell or internal photocell/pulsing LED combo.


No picture of the ext. box...its the same color, but a tiny box.
Re: Let's see your finished DIY projects!
Posted: Thu Feb 23, 2012 4:11 pm
by greeny23
thats some funky ass shit right there. however you need a second or third wire colour..
Re: Let's see your finished DIY projects!
Posted: Thu Feb 23, 2012 5:16 pm
by Dr Tony Balls
Re: Let's see your finished DIY projects!
Posted: Thu Feb 23, 2012 5:54 pm
by Rygot
greeny23 wrote:thats some funky ass shit right there. however you need a second or third wire colour..
Any wire color other than Green or Purple is overrated.

Also, nice builds, balls.
Re: Let's see your finished DIY projects!
Posted: Fri Feb 24, 2012 4:01 am
by skullservant
Been fooling around with the Bazz Fuss circuit all week and finally came up with something I enjoy. I call it the Gloom Drive. Huge output caps, tweaked resistor values, etc. More of a thick, dark overdrive than a full on fuzz. Incredibly loud.
First one is from an old enclosure I had laying around. I wanted to run this one off batteries. The LED shows if I need to turn off the battery or not.
No knob. Cranked all the time.


Second one is a more compact version, probably going to give this one away.


Lastly is the pretty one. It'll have a PTP Super Hard On to join it next week.


Re: Let's see your finished DIY projects!
Posted: Fri Feb 24, 2012 10:58 am
by sunmachine
Re: Let's see your finished DIY projects!
Posted: Fri Feb 24, 2012 12:46 pm
by skullservant
Neat enclosure!
Re: Let's see your finished DIY projects!
Posted: Fri Feb 24, 2012 4:48 pm
by theavondon
WHASSSSSSINIT?
Re: Let's see your finished DIY projects!
Posted: Sat Feb 25, 2012 1:10 am
by greeny23
i taught myself to swirl.

Re: Let's see your finished DIY projects!
Posted: Sat Feb 25, 2012 6:49 am
by Boxbie
This is my second build. My digital camera seems to take worse photos than my iphone -apologies.
Thanks for your help people, kudo to Lao for the etch advice!
Re: Let's see your finished DIY projects!
Posted: Sun Feb 26, 2012 6:09 am
by greeny23
3in1

Re: Let's see your finished DIY projects!
Posted: Sun Feb 26, 2012 3:11 pm
by enjoyadrian
what is it?
Re: Let's see your finished DIY projects!
Posted: Sun Feb 26, 2012 3:49 pm
by greeny23
confidential.
Re: Let's see your finished DIY projects!
Posted: Sun Feb 26, 2012 7:44 pm
by Jwar
Shhhhhhhhhhhhhhhh...Don't tell Delta, but here's a pedal I etched for him. It didn't turn out 100% perfect, but still looks pretty fucking cool IMO. Special thanks for Danny over on TB. He help me a LOT with some info.
