Re: Let's see your PEDAL BOARD!
Posted: Thu Dec 12, 2013 10:11 am
Glenouille wrote:Do you already have them in sync? Is it something that you need to do?
I don’t think it make the CP251 redundant. There is a slight overlap but they are different animals.
If you need to sync different technologies (MIDI, Din, CV/Gate, etc.), and if you want all the synced stuff to run at different subdivisions/multiples, etc. of one unique master clock, The RH-301 is the one.
If you want to control some parameters via CV with a LFO it can still do it and the LFO controls go further on the RH-301 (more wave shapes, more control over the wave shape symmetry, and rate with a max frequency going way over 50Hz) but you are limited in the numbers of pedz you can interact with in this fashion so when it comes to mixing CVs and redistributing the output to several pedals/devices or manipulating several parameters via CV, the CP251 is the one.
With multiple Foogers, it makes plenty sense to have one. With a paraphernalia of different devices and sync methods it makes sense to have a RH301. With both shitloads of Foogers and plenty of other thingies, having both the CP251 and the Koma also makes sense. Though where is the white CP-251?!
That's what I was afraid of, not using the rh301 to its full potential while I still like quite few features. Its just Im all cv and all my mono-synths and step sequencers and vintatge synthesisers etc i connect via cv. would be cool to have a master commander to combine my synth setup with my guitar set up...which is what i do when playing live anyways but with alot of wires and mixers.
A white 251 would look sharp with your koma backline...i'm kinda mad that koma's offering black now, at least on the 101. i would much rather have had a black 101, so now i have to get a white ft-201 cause I'm all weird like that. even my kommanders are all black? can't win for losing. that's something else I need to pick up is a couple more kommanders. i really like the expressive control they have over two parameters. its just delicious bananas hooked into my modular gear.
because I'm a dork, but an excited dork... After decades of carpetgaze, this is going to be my first real board. 
) finally arrived today from the great white north, and tomorrow I should be receiving the last of the cables I need. (re)Wired all the power cabling this evening, cable tied, etc. I need to get some smaller screws to hold the ties in place underneath, and some felt rubber or sumthin' for the bottom edges...
