Page 1111 of 3279
Re: What is in the post? The thread of and for GAS!
Posted: Mon May 27, 2013 2:25 pm
by Achtane
wut i didn't know you were on tour, domvan. Probably 'cause I'm not cool enough for Facebook...
GOOD LUCK, BRAH
Re: What is in the post? The thread of and for GAS!
Posted: Mon May 27, 2013 4:14 pm
by tuffteef
ishibashi are being ishi fags right now
gimme dat guitar jawn
Re: What is in the post? The thread of and for GAS!
Posted: Mon May 27, 2013 4:31 pm
by behndy
I LIKE YOUR NEW AVATAR TUFFY. IT MAKES ME MOIST.
DAMN you holidays. i really wanted my GilaModdo today damnit.
MURRFURRRFRRRRURR.
Re: What is in the post? The thread of and for GAS!
Posted: Mon May 27, 2013 5:27 pm
by blanket
Obulus wrote:The seller thinks the shade knob has another frequency between the two versions such that it is more extreme in the v1 and the v1 is vero whereas the v2 is on PCB. I tested a Fix'd Fuzz DLX once and it was awesome too, but it had more control over the different stages so I'm not sure the normal Fix'd will be equally awesome. But I guess this will be killer as well as it's the same beast but more stripped down (and there doesn't seem to be much of a difference between v1 and v2)! Definitely hope I can sell the KKF to get the Fix'd Fuzz!
edit: Yeah, I'd rather have the DLX as well, but I'm short on cash and this one is only €80! Also didn't know it had trimpots, so that's kinda good news even!
I have the V1 Fix'd Fuzz. Used to have the Deluxe as well as the Twosome. I actually prefer the V1 over the Deluxe because they changed the circuit in the Deluxe in a way that makes Fuzz 2 less musical to my ears.
Re: What is in the post? The thread of and for GAS!
Posted: Mon May 27, 2013 5:36 pm
by Derelict78
I got some serious gas for a moog fm101 and 103. Not sure witch I will buy first.
Re: What is in the post? The thread of and for GAS!
Posted: Mon May 27, 2013 6:16 pm
by univalve
Rack Case in.
Fuck, that shit loaded is Heavy. Probably because of that i got rid of that junk...
Re: What is in the post? The thread of and for GAS!
Posted: Mon May 27, 2013 7:41 pm
by theavondon
Achtane wrote:wut i didn't know you were on tour, domvan. Probably 'cause I'm not cool enough for Facebook...
GOOD LUCK, BRAH
Danks homie! And yeah, it's the last day today. I brought a few with me, but only like, five. So...plenty more at home.
Re: What is in the post? The thread of and for GAS!
Posted: Mon May 27, 2013 8:06 pm
by ChetMagongalo
theavondon wrote:I have incredible want for GETTING HOME FROM TOUR SO I CAN PLAY WITH THAT HUGE BOX OF OEDALS I GOT TWO WEEKS AGO
me too
Re: What is in the post? The thread of and for GAS!
Posted: Mon May 27, 2013 8:40 pm
by Obulus
AngryGoldfish wrote:The clean channel on the Klipp is worth it alone. Make sure it's in good working order though.
This is a hard one for me. Not in terms of what I like the best (obviously the Klipp), but the jag being my first guitar it's hard to get rid of it. FUCKING EMOTIONS MAN! I need to man up. Sent the pictures of my jag to the guy who is selling the Klipp. Hope he likes what he sees! Said he prefers money but he's interested in a jaguar.
blanket wrote:I have the V1 Fix'd Fuzz. Used to have the Deluxe as well as the Twosome. I actually prefer the V1 over the Deluxe because they changed the circuit in the Deluxe in a way that makes Fuzz 2 less musical to my ears.
The more broken sounding it is, the better I will like it I think so I don't know if I'm after something more musical. Based on the description I think I'm good for the broken sounding fuzz though!
Re: What is in the post? The thread of and for GAS!
Posted: Mon May 27, 2013 11:32 pm
by goroth
Achtane wrote:Probably 'cause I'm not cool enough for Facebook...
Me neither
Re: What is in the post? The thread of and for GAS!
Posted: Tue May 28, 2013 8:58 am
by MaxMaps
Really dumb question:
I am wiring my board with my DC10 and I am a bit confused/scared about turning it on and frying my pedals. Everything I have currently is 9v 400ma. Unless if I flip the tiny switches on the back of the DC10 I should be good to go just plugging everything in with the exception of the last bank right? Or do I need to go buy some connectors with splits on the end and just use the first 4 banks.
Help I is dumb ;/
Re: What is in the post? The thread of and for GAS!
Posted: Tue May 28, 2013 10:12 am
by sylnau
In:
-Lollar Special T
-Lollar Regal
But the luthier where I purchased the guitar is still on vacation.
And the seller is not sure they will install my new pickups since I didn't purchased them there.
Re: What is in the post? The thread of and for GAS!
Posted: Tue May 28, 2013 10:17 am
by behndy
not dumb. SAFE.
i'm on my 'pad so the flash on their site won't let me see thr manual, but thr DC10 page shows -
Outlet 1-4: 9V DC / 100mA each
Outlet 5-6: 9 or 12V DC / 200mA each*
Outlet 7-8: 9 and 12V DC / 400mA
Outlet 9-10: 9 and 12 or 15V DC / 400mA
* can be merged into a 400mA section
so all of them default to 9v. just different amounts mA available. if the dipswitches are down, they'll be 9v. i think my Pussy Power has what switches are what printed on it?
Re: What is in the post? The thread of and for GAS!
Posted: Tue May 28, 2013 11:35 am
by backwardsvoyager
MaxMaps wrote:Really dumb question:
I am wiring my board with my DC10 and I am a bit confused/scared about turning it on and frying my pedals. Everything I have currently is 9v 400ma. Unless if I flip the tiny switches on the back of the DC10 I should be good to go just plugging everything in with the exception of the last bank right? Or do I need to go buy some connectors with splits on the end and just use the first 4 banks.
Help I is dumb ;/
Yeah that's right, as long as the switches are in the down position and you're giving each individual pedal at least the minimum required mA there won't be any problems.
I just wired my whole board with a Ciokolate (first time user) and am pretty darn impressed how easily it powers ~20 pedals including annoying AC and center-positive ones.
Also in: montreal assembly goodbye 24
I CAN NOT EVEN DESCRIBE
Re: What is in the post? The thread of and for GAS!
Posted: Tue May 28, 2013 11:42 am
by Grrface
backwardsvoyager wrote:MaxMaps wrote:Really dumb question:
I am wiring my board with my DC10 and I am a bit confused/scared about turning it on and frying my pedals. Everything I have currently is 9v 400ma. Unless if I flip the tiny switches on the back of the DC10 I should be good to go just plugging everything in with the exception of the last bank right? Or do I need to go buy some connectors with splits on the end and just use the first 4 banks.
Help I is dumb ;/
Yeah that's right, as long as the switches are in the down position and you're giving each individual pedal at least the minimum required mA there won't be any problems.
I just wired my whole board with a Ciokolate (first time user) and am pretty darn impressed how easily it powers ~20 pedals including annoying AC and center-positive ones.
Also in: montreal assembly goodbye 24
I CAN NOT EVEN DESCRIBE
Ugh, the goodbye 24 is so good. I'm definitely going to get in on the next run.