ilovefuzz.com

Yeah $40, its making a lot of humming right now that I have to sort out, but once its fixed it'll be powering my EVM loaded 215 and the folded 18 and I use it with skips old Dunwich DI that I bought from ron. Its 410 watts at 2 ohms. Peavey says its stable under any load, so I think you can run it at like .1 ohm with a bajillion cabs or something like that and it'll be fine...I need to get me some series/parallel cab boxes. And MOAR cabs.

greenboy gas. . . I would donate my bass gear to a local church if I ever had greenboy gas.

"my neo 12, 4 inch mid and bullet tweeter @+20DB can beat up your bass rig. . . .

I was dreaming about a double dually..a dually dually? A 415 styled after a metal striped peavey for a while. Not no more.

check out that emperor 3x12

that's some crazy shit, dude.

that's the funkiest way to get those pics together, but totally awesome.

theyre basically in a circle around me
i rob should just take a small vid
i got no more room to move back or zoom out

so good ryan, sooo good.

ryan summit wrote:theyre basically in a circle around me
i rob should just take a small vid
i got no more room to move back or zoom out

I know this feel. with my stuff on all 4 walls I have no way to pic it all without moving it.

So i snapped a couple quick pics of the WALL OF DOOOOOOOOOM ive been building with cheap stuff. Its not done but still....









The Bugera 1960 feeds the homemade 2x15, the gflex, the apocolyptic peavey 4x12 and the behringer 4x10

The Peavey Mark 3 standard feeds the Drive ported 4x12 in the corner and the Sunn 1x15 on top of the behringer, its loaded with an Emi Big Ben

The Peavey old style standard is slaved to the Mark 3 and runs just the Randall folded horn

The Peavey f800b will be slaved to the above and will run just the SWR 6x10.

Im gonna swap out the behr 4x10 as soon as i can get some time to finish the 6x12 and the f800b needs a different cab. The Sunn beta in the corner and the RedBear both need some work before they get folded into the mix.

So......who thinks i need more amps and cabs?

mc_muench wrote:It makes the room vibrate...it's loaded with one of my Olson Electronics Big Rock PA 18". There a full range and they break up so good. I'd cry if I blew one.

I bet they're rare as fuck. I like the sounds out of the AC 361 cabs so I decided to just go with the CW. I have my eyes on one now. It's 4ohms though so I'm planning on adding a jack plate to use the 18" by itself at 4ohms or with the two 8" at 2ohm to get the most out of my Peavey MKIII BASS head. It is currently mismatched with my Sunn 2000s cab, originally with guitar speakers but I put a pair of Black Widows in there and it's what I'm using with the Peavey for now.

ryan summit wrote:check out that emperor 3x12

That's a nice rig right there! There's a Randall 300 at a pawn shop in town but the dude wants too much. It's been there for about 5 years or so and I can tell it needs work. If get some cash together I'll try to get the guy to lower the price. I don't think I should pay more than 2 bills.

theAntihero wrote:So i snapped a couple quick pics of the WALL OF DOOOOOOOOOM ive been building with cheap stuff. Its not done but still....









The Bugera 1960 feeds the homemade 2x15, the gflex, the apocolyptic peavey 4x12 and the behringer 4x10

The Peavey Mark 3 standard feeds the Drive ported 4x12 in the corner and the Sunn 1x15 on top of the behringer, its loaded with an Emi Big Ben

The Peavey old style standard is slaved to the Mark 3 and runs just the Randall folded horn

The Peavey f800b will be slaved to the above and will run just the SWR 6x10.

Im gonna swap out the behr 4x10 as soon as i can get some time to finish the 6x12 and the f800b needs a different cab. The Sunn beta in the corner and the RedBear both need some work before they get folded into the mix.

So......who thinks i need more amps and cabs?

That's beautiful.. but you are asking the doom room if you need more amps and cabs? the answer is always yes. No matter what it's yes.

ShaolinLambKiller wrote:


That's beautiful.. but you are asking the doom room if you need more amps and cabs? the answer is always yes. No matter what it's yes.

The only flaw I see is the shelf with the cabs needs to be higher so you can accommodate the eventual full stacks below.

I really want to hear/acquire one of those randall folded horns.

AxAxSxS wrote:

ShaolinLambKiller wrote:


That's beautiful.. but you are asking the doom room if you need more amps and cabs? the answer is always yes. No matter what it's yes.

The only flaw I see is the shelf with the cabs needs to be higher so you can accommodate the eventual full stacks below.

I really want to hear/acquire one of those randall folded horns.

Yeah, the shelf was built before i acquired all the cabs, itll eventually be moved up about 2 feet

For recording stuff all i got is a q3 so its not always the best quality, but i can record something soon