Page 1027 of 3279
Re: What is in the post? The thread of and for GAS!
Posted: Mon Apr 01, 2013 6:02 pm
by AngryGoldfish
pelliott wrote:AngryGoldfish wrote:What's a Valvetone Klipper?
I'd imagine he means Faustone Valve Klipper.
Thought so. Dibs on teh flipz.
Re: What is in the post? The thread of and for GAS!
Posted: Mon Apr 01, 2013 7:28 pm
by behndy
Wes Mantooth wrote:SmallEQ wrote:behndy wrote:Wes Mantooth wrote:Trying to find the right power supply I can save up for to cleanly power my whole board, not even a Ciokolate has enough 9VDC outlets
lol. f'realz though. with mine i have the Timeline, M9, Pitch Factor and Faye Sing on their own, then most everything else on it's own outlet. but a few things end up being chained to an outlet if they don't mind.
but i'm not putting a Ciokolate and another power supply down there.
i forget the name, but there's that stoopid expensive big modular thing you could go with?
For certain pedals, the Output splitter (last on the page
http://www.voodoolab.com/shop/index.php ... omu4dk8ql4) is an easy solution. I'm using two of them to connect some of my analog pedals and I have no noise issues whatsoever.
Good idea
Cioks has the same thing available so I'll just add on a few of those to a DC10 and I'll be good. Now I need to sell some stuff...
yah. i have a Pussy Power that is just laying around in case i want to do a smaller board so i have scads of adapters. i use either the 2 or 3 splitters or the chain cable from a OneSpot. i just be careful to give super digital/carrier wave stuff it's own chain.
ESPIREMENTS.
Re: What is in the post? The thread of and for GAS!
Posted: Mon Apr 01, 2013 7:43 pm
by SmallEQ
Wes Mantooth wrote:SmallEQ wrote:Good idea
Cioks has the same thing available so I'll just add on a few of those to a DC10 and I'll be good. Now I need to sell some stuff...
yah. i have a Pussy Power that is just laying around in case i want to do a smaller board so i have scads of adapters. i use either the 2 or 3 splitters or the chain cable from a OneSpot. i just be careful to give super digital/carrier wave stuff it's own chain.
ESPIREMENTS.
Yeah, all four of my SA pedals are on their own tap. The hot hand definitely didn't like being powered by a pedal that was sharing a ground with another pedal.
Re: What is in the post? The thread of and for GAS!
Posted: Mon Apr 01, 2013 7:46 pm
by behndy
i think the HH (you use the 3 right?) is 5 volt or something weird too.
"Outer diameter – 3.5mm
Inner diameter – 1.35mm
Voltage - 5V
Polarity – positive tip, negative barrel (this is the opposite of our 9V power supply)"
is what they told me when i asked. i need to contact PedalShark see if they make a Cioks cable that size.
Re: What is in the post? The thread of and for GAS!
Posted: Mon Apr 01, 2013 7:53 pm
by SmallEQ
behndy wrote:i think the HH (you use the 3 right?) is 5 volt or something weird too.
"Outer diameter – 3.5mm
Inner diameter – 1.35mm
Voltage - 5V
Polarity – positive tip, negative barrel (this is the opposite of our 9V power supply)"
is what they told me when i asked. i need to contact PedalShark see if they make a Cioks cable that size.
It does fine if its powered by an SA pedal, but if that SA pedal is sharing power with any other pedal it's noise city.
Re: What is in the post? The thread of and for GAS!
Posted: Mon Apr 01, 2013 8:25 pm
by behndy
interesting.
so, is there a cable that you use out of a SA pedal into the HH3? that would be awesome. i only have a BEF Pro right now, does that or do the 2's so the BEF2 will have one?
Re: What is in the post? The thread of and for GAS!
Posted: Mon Apr 01, 2013 8:56 pm
by SmallEQ
behndy wrote:interesting.
so, is there a cable that you use out of a SA pedal into the HH3? that would be awesome. i only have a BEF Pro right now, does that or do the 2's so the BEF2 will have one?
If you're not connecting the HH3 to any non SA pedals, you don't need anything other than the cable that connects to the BEF Pro that you are using now to power it.
Re: What is in the post? The thread of and for GAS!
Posted: Mon Apr 01, 2013 9:08 pm
by behndy
buuuuuut it's a difference sized barrel.
oh! you're saying it draws power of the Tip Ring Sleeve EXTRA 1/8 cable it comes with?
Re: What is in the post? The thread of and for GAS!
Posted: Mon Apr 01, 2013 9:30 pm
by bigchiefbc
Just in today:
As soon as someone buys my Supernatural, I'll order the VCO.
Re: What is in the post? The thread of and for GAS!
Posted: Mon Apr 01, 2013 9:34 pm
by SmallEQ
behndy wrote:buuuuuut it's a difference sized barrel.
oh! you're saying it draws power of the Tip Ring Sleeve EXTRA 1/8 cable it comes with?
You got it dude!
Re: What is in the post? The thread of and for GAS!
Posted: Mon Apr 01, 2013 9:39 pm
by behndy
fuck me that's awesome.
lol. i haven't been using it because it was such a bitch to power. durp.
urm. RTFM. DURP.
thanks pimp!
Re: What is in the post? The thread of and for GAS!
Posted: Mon Apr 01, 2013 9:43 pm
by ryan summit
you want me to hold your p.power
till you figure out the next step behn
ill keep it warm for ya
id love to grab one of them used
supernatural is so tempting too
damn
id have to sell the rrr to get chiefskys
ughhhh
i cant let shit go
and i cant afford new stuff right now
and i want so much
Re: What is in the post? The thread of and for GAS!
Posted: Mon Apr 01, 2013 9:44 pm
by theavondon
My friend traded his Bose L1 for all of this.
Re: What is in the post? The thread of and for GAS!
Posted: Mon Apr 01, 2013 9:47 pm
by foomanfat
Thanks to Prymaxe's easter code for coaxing me into this lil guy.
Re: What is in the post? The thread of and for GAS!
Posted: Mon Apr 01, 2013 11:10 pm
by Chankgeez
theavondon wrote:My friend traded his Bose L1 for all of this.
Holy crap, that's awesome. Good trade.
