Page 1002 of 3279

Re: What is in the post? The thread of and for GAS!

Posted: Tue Mar 12, 2013 4:07 pm
by AngryGoldfish
I received this in the mail today. I'm not sure where someone was looking for reviews, but here it is anyway.

Image

This thing is great. Everything you've seen and heard about it is bang-on the money. The sound quality is excellent, both with distortion and clean, and is every bit as good as its counterparts; arguably better. There is no signal loss or degradation when on or off. Latency is almost perfect; it's barely noticeable. Because the footswitch is soft to press, it's hard to make a mistake and miss-time your feet.

The only problem I have with it is, you can't undo overdubs further into the piece, you can only undo the most recent layer. So if you don't press undo for long enough you can actually record something, whatever your guitar is doing at the time, and then you can't undo the one you really wanted to undo. If you try to undo again you just redo the mistake. This is the limitation of such a small device.

Other than that I'm really happy. Hopefully the switch will last long enough, because I've heard they're not very rugged. The size is smaller than you'd think, the knob feels comfortable to turn, the light and sounds to distinguish where you are in the looping phase are all intuitive (though you can't see the light when you hover your foot over it), there is zero perceivable latency, and the sound quality is excellent.

I'm happy - though I did just break the nut on my new Telecaster, so yeah.

Re: What is in the post? The thread of and for GAS!

Posted: Tue Mar 12, 2013 5:19 pm
by Achtane
theavondon wrote:Image

Yes.


What does the super special button do?

Re: What is in the post? The thread of and for GAS!

Posted: Tue Mar 12, 2013 5:23 pm
by tuffteef
Image


super pov atm but copped cij jag anyway cause only five hundo

Re: What is in the post? The thread of and for GAS!

Posted: Tue Mar 12, 2013 5:48 pm
by Muse FTW
tuffteef wrote:Image


super pov atm but copped cij jag anyway cause only five hundo


Love that color scheme.

Re: What is in the post? The thread of and for GAS!

Posted: Tue Mar 12, 2013 6:24 pm
by coldbrightsunlight
That jag is beautiful! Such an amazing colour scheme.

Re: What is in the post? The thread of and for GAS!

Posted: Tue Mar 12, 2013 8:20 pm
by theavondon
Achtane wrote:
theavondon wrote:Image

Yes.


What does the super special button do?


It lights up.

Image

Re: What is in the post? The thread of and for GAS!

Posted: Tue Mar 12, 2013 9:02 pm
by Achtane
ooffffffff

Re: What is in the post? The thread of and for GAS!

Posted: Tue Mar 12, 2013 11:37 pm
by GardenoftheDead
hbombgraphics wrote:got an FZ-2 in the male today
holy heavy

is their a built in gate of some type?


enjoy!

Re: What is in the post? The thread of and for GAS!

Posted: Wed Mar 13, 2013 7:04 am
by univalve
univalve wrote:
GardenoftheDead wrote:
univalve wrote:I probably buy a cheap parlor. My recorded acoustics are sitting to fat in The Mix, taking too much frequencies... It is annoying to castrade them later when The Mix gets too boomy.
But i'm not sure if New Equipment will help here. Perhaps it is just Lack of Recording experience and know how...


http://audio.tutsplus.com/tutorials/mix ... 3d-mixing/

Ordered it. This was just the Thing that Pushed me over the Edge.
If it doesn't Record well, i will Return it. But the Company Brand is called Recording King so it should better work Out well :lol:

Image
Tracks pretty good. Even in a part where two fuzz guitars are rocking out, i hear it in the mix without eq'ing :joy: . Only downside, the low e-string is snarrling from the second to the 7th fret. Will try it again this afternoon and the probably return it for another one...

Re: What is in the post? The thread of and for GAS!

Posted: Wed Mar 13, 2013 9:58 am
by Muse FTW
theavondon wrote:
It lights up.

Image


Yoooooooooo what the fuck that's awesome. I figured it would only be one color but damn that's fresh.

Re: What is in the post? The thread of and for GAS!

Posted: Wed Mar 13, 2013 10:07 am
by skullservant
Got some patch cables, some blank pannels, and this Pittsburgh In/Out to finish the first mini case:

Image

Re: What is in the post? The thread of and for GAS!

Posted: Wed Mar 13, 2013 9:15 pm
by Mudfuzz
Mudfuzz wrote:
bob the r0bot wrote:Taking a chance on a weird old dod
Image

I forgot all about those... I want to hear your thoughts on it when you get it!

In from bob the r0bot :thumb:

Re: What is in the post? The thread of and for GAS!

Posted: Thu Mar 14, 2013 1:06 am
by Fuzzy Picklez
Mudfuzz wrote:
Mudfuzz wrote:
bob the r0bot wrote:Taking a chance on a weird old dod
Image

I forgot all about those... I want to hear your thoughts on it when you get it!

In from bob the r0bot :thumb:

I guess he didn't like it?

Re: What is in the post? The thread of and for GAS!

Posted: Thu Mar 14, 2013 1:43 am
by Mudfuzz
Fuzzy Picklez wrote:
Mudfuzz wrote:
Mudfuzz wrote:
bob the r0bot wrote:Taking a chance on a weird old dod
Image

I forgot all about those... I want to hear your thoughts on it when you get it!

In from bob the r0bot :thumb:

I guess he didn't like it?

:idk: he said he liked it but it wasn't what he was after :idk:
I like it :thumb: it's.. very 90's industrial sounding.

Re: What is in the post? The thread of and for GAS!

Posted: Thu Mar 14, 2013 11:44 am
by fungalattack
Mudfuzz wrote:I like it :thumb: it's.. very 90's industrial sounding.


:rock: :rock: :rock: