Page 94 of 408
Re: Let's see your finished DIY projects!
Posted: Mon Sep 05, 2011 4:27 pm
by nieh
Big Muff rehouse. Need to get matching knobs though.
Re: Let's see your finished DIY projects!
Posted: Mon Sep 05, 2011 7:17 pm
by The4455
nieh wrote:Big Muff rehouse. Need to get matching knobs though.
Cool, how hard was it? Also do you think I could do the same thing to a russian big muff, black re-issue?
Re: Let's see your finished DIY projects!
Posted: Mon Sep 05, 2011 7:59 pm
by nieh
The4455 wrote:nieh wrote:Big Muff rehouse. Need to get matching knobs though.
Cool, how hard was it? Also do you think I could do the same thing to a russian big muff, black re-issue?
Was pretty easy. Only hard this was rewiring new pots because they're surface mounted, and the board is pretty long. and probably. You would have to replace the jacks though.
Re: Let's see your finished DIY projects!
Posted: Mon Sep 05, 2011 8:37 pm
by eatyourguitar
I have a pigeon fx vintage muff pcb that doesnt fit in a 1590BB. I would buy that enclosure off you for the germanium triangle im building.
Re: Let's see your finished DIY projects!
Posted: Tue Sep 06, 2011 9:11 pm
by nieh
eatyourguitar wrote:I have a pigeon fx vintage muff pcb that doesnt fit in a 1590BB. I would buy that enclosure off you for the germanium triangle im building.
It has two holes drilled by the input for switches...
Re: Let's see your finished DIY projects!
Posted: Wed Sep 07, 2011 5:38 pm
by John Lyons
Re: Let's see your finished DIY projects!
Posted: Wed Sep 07, 2011 6:56 pm
by ashdown
love the giant led?
Re: Let's see your finished DIY projects!
Posted: Wed Sep 07, 2011 9:46 pm
by ARC Effects
John - can you elaborate on your screen print methods? I'm looking to add graphics to my pedals and wondering where I should start.
Re: Let's see your finished DIY projects!
Posted: Wed Sep 07, 2011 9:59 pm
by LaoWiz
Supersick!
Re: Let's see your finished DIY projects!
Posted: Wed Sep 07, 2011 10:22 pm
by John Lyons
StupidDream88 wrote:John - can you elaborate on your screen print methods? I'm looking to add graphics to my pedals and wondering where I should start.
I use waterslide decals.
Fairly simple, just add practice. 8x10 sheets are $2 from smallbear.
I use the laser decals.
Re: Let's see your finished DIY projects!
Posted: Wed Sep 07, 2011 11:39 pm
by Wes Mantooth
I have such GAS for some Basic Audio right now!
Would love a custom zippy in one of those wedge enclosures!
Re: Let's see your finished DIY projects!
Posted: Thu Sep 08, 2011 10:03 am
by Pollinator95
I´ve been waiting for someone to post a bad-looking pedal so the contrast isn´t too bad, but looks like it´s not going to happen.
Red Llama Clone
It´s my first build, so I´m pleased that it at least works.
Re: Let's see your finished DIY projects!
Posted: Thu Sep 08, 2011 10:22 am
by eatyourguitar
Pollinator95 wrote:Red Llama Clone
glad you got it working. you might want to put the board closer to the pots next time if you have 3 pots and they all go directly to the board. there is a trick too if you have a vol pot at the end of the circuit for example. you could run 3 wires from the board to the pot and the output from the board to the switch. thats 4 wires. or you could just take the lug 3 from the board and wire it to the vol pot. the other lugs of the vol pot go to the switch and lug 1 to ground. thats 3 wires instead of 4 but only 1 wire that connects to the board. MUuuuuch cleaner in most cases.
Re: Let's see your finished DIY projects!
Posted: Thu Sep 08, 2011 4:20 pm
by John Lyons
[youtube]http://www.youtube.com/watch?v=e3HnyD5BOqg[/youtube]
Re: Let's see your finished DIY projects!
Posted: Thu Sep 08, 2011 7:41 pm
by Rygot
For another ILF'er.
FY2 with added 2 knob tone stack and scoop trim > Green Ringer
