Re: The Doom Room: ILF Edition
Posted: Sun Dec 08, 2013 8:30 pm
"No tubes, power cord, or fuses but when I teabagged it, the tolex felt pretty good. $400 OBO"
Page 926 of 2348
Re: The Doom Room: ILF Edition
Posted: Sun Dec 08, 2013 8:46 pm
Re: The Doom Room: ILF Edition
Posted: Sun Dec 08, 2013 9:04 pm
Honey Boo Boo was just three miles down the road from my house filming their Christmas Special. It is seriously time to fucking move.
Re: The Doom Room: ILF Edition
Posted: Sun Dec 08, 2013 9:26 pm
"The thinner glass on the bulbs makes for a brighter tone. It really lets the power section 'breathe'. Deez toanz!" lolAxAxSxS wrote:"I didn't have any tubes for the amp so I used Light bulbs and the covered it in lighter fluid and turned it on. It sounded pretty good. "
I've had good luck with last few purchases from ebay, but I usually expect some work on vintage stuff like these. If you can get it for $250 and spend $150 or less to put it back in spec, I still think that's usually a deal.
Re: The Doom Room: ILF Edition
Posted: Sun Dec 08, 2013 10:13 pm
Time to grab your bugout bag and RUN! Just shoot anything in your path. H ead North west. We will find you.conky wrote:Honey Boo Boo was just three miles down the road from my house filming their Christmas Special. It is seriously time to fucking move.
Re: The Doom Room: ILF Edition
Posted: Sun Dec 08, 2013 10:50 pm
how rugged are these guys? built tough or flimsy?fallen wrote:Hovercraft unboxing:
Hovercraft stencils on the box.
All packed, ordered a couple of Solid Cables speaker cables with it.
Came with a Funn O))) sticker and a Mercury power cord.
Some documentation in silver sharpie on the back. Those EL84s look TINY in there.
The controls are Gain, Bass, Middle, Treble, Volume, HF Drive.
FIrst impressions are that the tone of this amp is right up my alley. No mid or low mid scoop, just a nice flat response that you can add to. Good warm, slightly dirty sound with the gain low, great high gain tone. Perfect mid frequency, sounds good maxed. Too much bass, kept it on noon or below but nice to know that there is a lot more on tap. HF Drive can get harsh but works really well to add in some sparkle when the volume is lower. 20 watts isn't much but for recording and playing in the house it's good. Mid gain pushed with an Elements sounded really good. Lowish gain with a Pharaoh it got really sludgy in a good way. Fun amp. Looks great too... I'm a sucker for that Matamp style plexi front panel and the handles.
Re: The Doom Room: ILF Edition
Posted: Sun Dec 08, 2013 11:59 pm
It's built out of the recycled chassis of a Jet City so it's mostly made out of Chinese components. Seems to be built well, I've had no problems with mine but I'm not gigging it or anything.
If it helps the Hovercraft is the amp I play through most other than the THR10 on my coffee table and I have a JCM800 sitting in storage.
It's to the point that if I started gigging again I might consider putting a direct out on the Hovercraft to slave to an EL34 power amp rather than digging out the Marshall.
If it helps the Hovercraft is the amp I play through most other than the THR10 on my coffee table and I have a JCM800 sitting in storage.
It's to the point that if I started gigging again I might consider putting a direct out on the Hovercraft to slave to an EL34 power amp rather than digging out the Marshall.
Re: The Doom Room: ILF Edition
Posted: Mon Dec 09, 2013 4:36 am
Windhand Kicks ass. That is all.
Re: The Doom Room: ILF Edition
Posted: Mon Dec 09, 2013 9:33 am
Re: The Doom Room: ILF Edition
Posted: Mon Dec 09, 2013 10:20 am
i thought it was bad enough when i read that they were buying a house in a subdivision on a golf course right up the road from our practice space but this is worse. That dumpy fat tub of fuck was literally in my back yard.AxAxSxS wrote:Time to grab your bugout bag and RUN! Just shoot anything in your path. H ead North west. We will find you.conky wrote:Honey Boo Boo was just three miles down the road from my house filming their Christmas Special. It is seriously time to fucking move.
And that Gibson is pretty damn nice. I haven't really gassed for anything at all in about a month or so until now. I don't like the baked maple board on it though. They aren't in trouble anymore so why can't they use rosewood on them again?
Re: The Doom Room: ILF Edition
Posted: Mon Dec 09, 2013 10:42 am
Re: The Doom Room: ILF Edition
Posted: Mon Dec 09, 2013 10:55 am
got my argentinian buddy here now
not only my bizniss partner now
but can fuckin kill it on bass
and laughs like a latino dracula
jammed with us this weekend
made me realize how much nonsense john puts up with
dudes like(in spanish accent)
"dude,you gotta follow somone"
fuckin rules,rules,rules
open strings and KABOOOOOOM
get with el prògrãm de la dangrxfield
it was lotsa fun
not only my bizniss partner now
but can fuckin kill it on bass
and laughs like a latino dracula
jammed with us this weekend
made me realize how much nonsense john puts up with
dudes like(in spanish accent)
"dude,you gotta follow somone"
fuckin rules,rules,rules
open strings and KABOOOOOOM
get with el prògrãm de la dangrxfield
it was lotsa fun
Re: The Doom Room: ILF Edition
Posted: Mon Dec 09, 2013 11:22 am
Hmmmm a pair can pull 300w?!?! Nick I think the Wizard might need an overhaulamorphous wrote:Anyone messed with KT150's yet?
http://www.thetubestore.com/Tubes/KT88- ... -Sol-KT150
Re: The Doom Room: ILF Edition
Posted: Mon Dec 09, 2013 11:25 am
conky wrote:i thought it was bad enough when i read that they were buying a house in a subdivision on a golf course right up the road from our practice space but this is worse. That dumpy fat tub of fuck was literally in my back yard.AxAxSxS wrote:Time to grab your bugout bag and RUN! Just shoot anything in your path. H ead North west. We will find you.conky wrote:Honey Boo Boo was just three miles down the road from my house filming their Christmas Special. It is seriously time to fucking move.
And that Gibson is pretty damn nice. I haven't really gassed for anything at all in about a month or so until now. I don't like the baked maple board on it though. They aren't in trouble anymore so why can't they use rosewood on them again?
They are using Rosewood(laminated pieces of rosewood to make a fret board I should say)along with using the baked maple still as well. Not a fan of the way the maple looks but whatever. If I had the funds and played a guitar with one of the maple boards and liked it I would over look the apperance.
Re: The Doom Room: ILF Edition
Posted: Mon Dec 09, 2013 11:30 am
I'm curious...but a staggering 850v plate voltage!
http://www.pyndt.dk/Tung-Sol%20KT150%20Curves.pdf
http://www.pyndt.dk/Tung-Sol%20KT150%20Curves.pdf