Let's hear about those cab builds you have planned.

sonidero · Post by **sonidero** » Fri May 23, 2014 11:26 pm

ShaolinLambKiller wrote:also here is the cab miced out:

ShimaTetsuo · Post by **ShimaTetsuo** » Fri May 23, 2014 11:29 pm

wildebelor wrote:care to share via pm?

Well, they were drawn by studying many different pictures and not by having access to them. If you are still interested I'd be happy to share what I came up with.

ShaolinLambKiller · Post by **ShaolinLambKiller** » Fri May 23, 2014 11:40 pm

sonidero wrote:
ShaolinLambKiller wrote:also here is the cab miced out:

Thank ya!! and the best part is I just sold it today. :yay:

and on top of that I'm starting a build to mimmick it but as a 412. Same buyer.

sonidero · Post by **sonidero** » Fri May 23, 2014 11:41 pm

Are there shots with the speakers exposed???

ShimaTetsuo · Post by **ShimaTetsuo** » Sat May 24, 2014 1:38 am

EDIT: I got to work to fix the error and used a few more reference points(known dimensions) to get closer to them Green 4x15 cabs. Will share my work when done.

ryan summit · Post by **ryan summit** » Sat May 24, 2014 10:29 am

nice work slk
i like that wet look myself
that grain is sick

whiskey_face · Post by **whiskey_face** » Sat May 24, 2014 1:21 pm

ShaolinLambKiller wrote:That'll be fucking awesome. I'm actually converting my original orange 215 cab into a 218 cab because it'll work and be beastly... and cause I can.

Also my 212 115 cab is completed:

not to be "that guy", take this more as a hacktip

the drywall screws to hold on the logo, look. . . unrefined.

maybe a panhead screw instead of a cabinet screw?

that's all I got, other then that it looks fab. :hug:

just that stuck out as something to make it look more like a polished product :hug:

AxAxSxS · Post by **AxAxSxS** » Sat May 24, 2014 2:23 pm

Update and progress pics.

I am also a fan of the wet look. Going kinda extreme on this one and using a 2 part epoxy finish. It's the kind of stuff you probably have seen on wood bar tops or restaurant tables. you mix it, pour it and spread it.

Making sure the surface is level and taping off to prevent runs and important things being sealed.

Pour it on and spread. I'm using a bondo spreader thingy available at autobody store. an old credit card also works well.

You can see an allready cured section to the right. it does not dry totally level unless you pour an extremely thick coat. You can sand and polish it though so thats the route I am going.

the taped off section will look the same as it does now after curing. I will then do another coat to level any low spots so that it wiill sand flat prior to final wetsand and polish.

ShaolinLambKiller · Post by **ShaolinLambKiller** » Sat May 24, 2014 4:16 pm

whiskey_face" ]
not to be "that guy", take this more as a hacktip

the drywall screws to hold on the logo, look. . . unrefined.

maybe a panhead screw instead of a cabinet screw?

that's all I got, other then that it looks fab.

just that stuck out as something to make it look more like a polished product [/quote]

hahahahaha , they are flathead finished screws. they aren't drywall screws at all. I only use the drywall screws for the interior for holding on the baffle. But thanks for the suggestion though apparently it doesn't look like the finished screws. But yea, at .56 a screw I would hope it would be a bit more noticeable.
I used panhead on my other cabs and I actually didn't like them as much I wanted the more flat look instead of the 4 little bumps on them

But thanks! Glad you dig on it other than my screws not looking right.

[quote="sonidero wrote:Are there shots with the speakers exposed???

as you wish:

1960's Utahs and the 15, while I'm not exactly sure what it is, I pulled it from the Kustom 215 tuck n roll i bought and wasn't working. the other 15 was shot which was breaking the circuit but this one was fine. I was looking up to see what it was cause it's supposed to be original to the cab but I can't be certain about that.

odontophobia · Post by **odontophobia** » Sat May 24, 2014 8:44 pm

yo slk

you wanna try your hand at building a headshell for my vtm? the old chipboard particleboard bullshit is fubar -- papi needs a new home.

ShaolinLambKiller · Post by **ShaolinLambKiller** » Sat May 24, 2014 9:53 pm

Hell yea I'm down for it! Just shoot me a PM or email at shaolinlambkiller@gmail.com or maulercabs@hotmail.com no matter which.

AxAxSxS · Post by **AxAxSxS** » Sat May 24, 2014 10:29 pm

Very relevant to my interests...
The butcher I just got needed some work right off the bat so I had it out, I swear that headshell weighs as much as the amp itself! I mean, It's a tank and all but I dont think it needs to be bullet resistant.

ShaolinLambKiller · Post by **ShaolinLambKiller** » Sat May 24, 2014 10:30 pm

They built it assuming that all the musicians are clumsy stoners and will probably be dropping them on the ground pretty often.

odontophobia · Post by **odontophobia** » Sun May 25, 2014 9:00 am

AxAxSxS wrote:Very relevant to my interests...
The butcher I just got needed some work right off the bat so I had it out, I swear that headshell weighs as much as the amp itself! I mean, It's a tank and all but I dont think it needs to be bullet resistant.

yeah -- same headshell. it's a fucking bitch. the butcher and vtm are both sized the same as the 5150. it used to be that you could order the headshell from peavey but last time i tried they said no.

ShaolinLambKiller · Post by **ShaolinLambKiller** » Sun May 25, 2014 4:55 pm

That's cause they want you to buy a whole new head. Stop saving that old gear. new shit is where it's at!

ilovefuzz.com

Let's hear about those cab builds you have planned.

Re: Let's hear about those cab builds you have planned.

Re: Let's hear about those cab builds you have planned.

Re: Let's hear about those cab builds you have planned.

Re: Let's hear about those cab builds you have planned.

Re: Let's hear about those cab builds you have planned.

Re: Let's hear about those cab builds you have planned.

Re: Let's hear about those cab builds you have planned.

Re: Let's hear about those cab builds you have planned.

Re: Let's hear about those cab builds you have planned.

Re: Let's hear about those cab builds you have planned.

Re: Let's hear about those cab builds you have planned.

Re: Let's hear about those cab builds you have planned.

Re: Let's hear about those cab builds you have planned.

Re: Let's hear about those cab builds you have planned.

Re: Let's hear about those cab builds you have planned.