ilovefuzz.com

Yes sir!







The finish is really hard to photograph but it looks closest to this :



I put a lot of work into this one... I also carved into the back (in a pretty haggard manner if I do say so ) and then powdercoated over that and got a pretty cool look.

I've been jamming with my tele > the rooster > nova delay > orange ad30 and loving every minute of it.

Theres a fuzz pedal in there.

StupidDream88 wrote:Yes sir!







The finish is really hard to photograph but it looks closest to this :



I put a lot of work into this one... I also carved into the back (in a pretty haggard manner if I do say so ) and then powdercoated over that and got a pretty cool look.

I've been jamming with my tele > the rooster > nova delay > orange ad30 and loving every minute of it.

Yours has mo' mojo.

Well I wouldn't have made one if yours didn't sound so damn good

StupidDream88 wrote:Well I wouldn't have made one if yours didn't sound so damn good

Hahaha! I was only keeeeding! Cannot wait for it. I think I am your biggest DAM fan. HEHEHEHE

nieh wrote:

0722111927.jpg

Theres a fuzz pedal in there.

Neat! One of your own?

nieh wrote:

0722111927.jpg

Theres a fuzz pedal in there.

That is so cool!!

Achtane wrote:

nieh wrote:

0722111927.jpg

Theres a fuzz pedal in there.

Neat! One of your own?

Yea. I changed out the clipping diode from an led to a different diode I had a random bag of and I got a lot better sound out of it. Sounds really muffish. I'll probably make a demo of it tomorrow.

UV300 vibrato rehouse. I had to break one before I got it right. lots of hours here. one of the foot switches has a 390nF cap in parallel with c15 to slow down the rate. I reinstalled the stock status light so its easy to tell that the on-board solder jumper is still intact and the pedal is booting into on mode. the trace you must jumper is about 1/10 the size of an smd part. I can post more info if you want to build one.

hot glue is really helpful for stuff like that. smart move. and wow, that etch is deep!

Has anyone ever carved an enclosure before? Like with a dremel or something? I tried once, and it was harder than I thought. Might have another go at it.

The led is usually pretty solid without glue but they were moving around when i touched led v+. If you can bend it into place and get the cover on without glue, there is nothing that will move it. Not even gravity. If you use a bezel, it puts the led higher where it may get damaged by your foot. Thats why i like doing it this way. Cheap, simple, longer lasting.

Jero, its a hand carved wax mask, i dont use press n peel blue or magazine paper.

I cannot wait to get my hands on that thing

eatyourguitar wrote:Jero, its a hand carved wax mask, i dont use press n peel blue or magazine paper.

Care to elaborate?

Its sunday so it will ship on monday.

The mod sounds good at 9 o clock full ccw and 9 o clock. Like a subtle slow bend of the hands. Everyone can sound like clapton. No mod and all pots cw is just wild as shit. Good to punch in one note on a solo. The drunk bitch... she will be missed. I have another uv300 im keeping it

@jero, im on my phone, ill post it later with pics