Page 77 of 408
Re: Let's see your finished DIY projects!
Posted: Thu Jul 21, 2011 5:29 pm
by ARC Effects
Just finished powdercoating this (on the hottest day of the year
) for a Stone Grey Distortion. It's a transparent black over a bare enclosure and the look really fits the name with the pattern of the bare enclosure.
Re: Let's see your finished DIY projects!
Posted: Thu Jul 21, 2011 7:19 pm
by ARC Effects
Re: Let's see your finished DIY projects!
Posted: Thu Jul 21, 2011 7:39 pm
by hazelwould
How is that thing?
Re: Let's see your finished DIY projects!
Posted: Thu Jul 21, 2011 9:15 pm
by ARC Effects
Wish I knew....I bought a 4049 rather than a 4069
Re: Let's see your finished DIY projects!
Posted: Thu Jul 21, 2011 10:14 pm
by eatyourguitar
good news, the cd4049 hex inverting buffer should work just like a 40106 hex inverting schmitt trigger. check the pinout. two pins on the 4049 are no connection. its also 16DIP vs 14DIP. beavis audio has a 6 voice oscillator that uses 100kB pots.
Re: Let's see your finished DIY projects!
Posted: Thu Jul 21, 2011 11:18 pm
by ARC Effects
Re: Let's see your finished DIY projects!
Posted: Thu Jul 21, 2011 11:58 pm
by LaoWiz
Re: Let's see your finished DIY projects!
Posted: Fri Jul 22, 2011 5:32 am
by BlindtoFaith
Yup....dats mine!!!!!!!!!!! Fuck me I cannot wait!
Re: Let's see your finished DIY projects!
Posted: Fri Jul 22, 2011 6:23 am
by AC128
Silicon Fuzz
Q1 MPSA18
Q2 2N3904
Q3 2N3906
sounds
, so
the output is very high and the 'fuzz' knob behaves in an unexspected & cool manner.
Instead of just increasing the buzz it's almost like it covers three different tonal ranges as well, pretty evenly spaced, too.
Doubling guitar tracks with this on one side and pigeonFX's germanium FF on the other should be great!
Re: Let's see your finished DIY projects!
Posted: Fri Jul 22, 2011 9:06 am
by Teej212
lao's reverse etch ftw.
Re: Let's see your finished DIY projects!
Posted: Fri Jul 22, 2011 9:17 am
by AC128
Teej212 wrote:lao's reverse etch ftw.
+1
Re: Let's see your finished DIY projects!
Posted: Fri Jul 22, 2011 10:28 am
by eatyourguitar
AC128 wrote:Teej212 wrote:lao's reverse etch ftw.
+1
and the knobs are dope
Re: Let's see your finished DIY projects!
Posted: Fri Jul 22, 2011 2:14 pm
by LaoWiz
eatyourguitar wrote:AC128 wrote:Teej212 wrote:lao's reverse etch ftw.
+1
and the knobs are dope
Got a box of these knobs from ebay, NOS beauties!
Re: Let's see your finished DIY projects!
Posted: Fri Jul 22, 2011 2:17 pm
by ARC Effects
After the success with the stone grey box I did another one but I sanded down the enclosure prior to powdercoating and it made for an awesome flame type finish. That picture is pretty off as far as the look in person but I wanted to show the "grain"
Re: Let's see your finished DIY projects!
Posted: Fri Jul 22, 2011 3:59 pm
by eatyourguitar
StupidDream88 wrote:After the success with the stone grey box I did another one but I sanded down the enclosure prior to powdercoating and it made for an awesome flame type finish. That picture is pretty off as far as the look in person but I wanted to show the "grain"
thats a PRS AAAAA private stock 10 top right ther
