Let's see your PEDAL BOARD!

[insubordination]

How is the Minifooger delay??

I posted this in the thread where you asked for thoughts about it, but it bears repeating:

Got one and I love it. I would definitely recommend using an expression pedal with it, but you could get by without it. I use the exp. to control feedback, and set it so toe down creates a washy fog, but doesn't run away or get uncontrollable, and then I can just pull it back when I need to, and often just leave the pedal on all the time when practicing. The drive knob can add a LOT of gain, so I rarely turn it up past 9:00. It sounds really nice though, I wonder if it's similar to the MF Boost circuit? Just a good, clean boost that makes dirt before it sound better. The repeats don't get super duper dirty, nor are they hi-fi...they're just very pleasing.

My one minor gripe is I wish the second exp. function was for mix and not time. Mix knob all the way down doesn't take the repeats out of the signal path entirely, so it's like 2% wet to 100% wet, which can be cool. But it would be nice to set a nice hazy fog of repeats and then fade it in and out. Using expression for delay time is fun, but not practical for me personally. I could see a use for it though. All in all, great pedal!

[theavondon]

To date this is the coolest signal chain I've assembled
Now, more than ever there's an urgent need to get a recording setup sorted out...before I get myself lost in another world

You're a fucking madman.

[retinal orbita]

Yo that 3 DMM just upped the fucking game, lads....

[pickdropper]

To date this is the coolest signal chain I've assembled
Now, more than ever there's an urgent need to get a recording setup sorted out...before I get myself lost in another world

You're a fucking madman.

+1. That's fantastic.

[sylnau]

Working on the wires at the moment...
What you guys think?

board-2014-07.JPG (108.05 KiB) Viewed 2858 times

[osbornkt]

Sylnau, your board is great as usual.
Rustywire, you need another DMM

[Clean Channel]

Yeah, killer board Sylnau!

[skullservant]

How is the Minifooger delay??

I posted this in the thread where you asked for thoughts about it, but it bears repeating:

Got one and I love it. I would definitely recommend using an expression pedal with it, but you could get by without it. I use the exp. to control feedback, and set it so toe down creates a washy fog, but doesn't run away or get uncontrollable, and then I can just pull it back when I need to, and often just leave the pedal on all the time when practicing. The drive knob can add a LOT of gain, so I rarely turn it up past 9:00. It sounds really nice though, I wonder if it's similar to the MF Boost circuit? Just a good, clean boost that makes dirt before it sound better. The repeats don't get super duper dirty, nor are they hi-fi...they're just very pleasing.

My one minor gripe is I wish the second exp. function was for mix and not time. Mix knob all the way down doesn't take the repeats out of the signal path entirely, so it's like 2% wet to 100% wet, which can be cool. But it would be nice to set a nice hazy fog of repeats and then fade it in and out. Using expression for delay time is fun, but not practical for me personally. I could see a use for it though. All in all, great pedal!

Sounds awesome

Hazy fog is always a good description

[jasonmoriparty]

Am I the only one who always thinks "I'm going to post my board when I'm happy with it, which will be soon." And then I'm never happy with it and never post it?

[12XU2A3X3]

Naw man, everybody does that

[sylnau]

Done with all the wire (I'm starting to hate Lava plugs).

SN_Board_2014-07.JPG (130.48 KiB) Viewed 2905 times

[skullservant]

Yeah, I had some Lava cables and I move my stuff around too much for solderless cables, apparently haha

Updated the big home board yesterday:

Super Duper Clone -> Fat Sandwich -> WSoU -> Aqua Puss -> Sonar -> RAT -> Multiplay -> BitQuest -> Carbon Copy -> Hall of Fame

Essentially I just swapped out the Dirge silicon boost for the Super Duper so I could have two boost channels. I moved the Fat Sandwich to where the Big Spider was, and then put the Rat where the Fat Sandwich was.
Moved the BitQuest mode from the filter settings to the pitch shifter modes, and have it set up so on one side of the expression wheel its a chorused 12 string sound, and the other side of it sounds like a clean bass track under the guitar

[DannDubbleEwe]

Love that Rat wedge!

[skullservant]

Thanks man!! Had fun building that one up. Put some copper shielding DIRGE logo on it to finish it off!

[rustywire]

Now, you just need a couple more Harmonic Percolators.

I want one with diode lift, but wouldn't be against owning several

Three DMMs is the best thing I've ever seen.

Yo that 3 DMM just upped the fucking game, lads....

To date this is the coolest signal chain I've assembled
Now, more than ever there's an urgent need to get a recording setup sorted out...before I get myself lost in another world

You're a fucking madman.

+1. That's fantastic.

Sylnau, your board is great as usual.
Rustywire, you need another DMM

When it happened I more or less echoed you fellas.
As they aligned it felt like I was venturing into uncharted territory...sounds it, too. I've seen 2 DMMs in a setup before (pretty sure in It Might Get Loud) but 3?

Here are some notes on the signal chain:
Fuzzrite > '69 > Deja Vibe > HP > phase-O-matic deluxe > dual TB loop > Reverbamate > Dry out > amp Normal Ch; Wet out > Elements > violet TB loop > amp Bass Ch (~67 Selmer TNB 50mk2). Everything in front since non-master no-loop no worries.

loop 1: '80 DMM (middle) ~400ms/Vibrato
loop 2: '78 DMM (left) ~200ms/Chorus
violet loop: '80 DMM #2 (right) ~200ms/Vibrato

EV-5: Elements with severe bass cut and boost @1200Hz, adding ~20dB gain no-clip...to blast the 3rd DMM (and amp) with 100% wet, max-dwell reverb
EX-P: Manual phasing





Also Sylnau's setup does rule. That dirt section...and I wish my Elements were that finish