Let's see your PEDAL BOARD!

[Uncle Grandfather]

The FT201 is the impossible result of an orgy involving the Tracer city, the MF101 and the Goatkeeper. I absolutely love it, you can build killer riffs in no time. Bass>Hog suboctaves>Wizard Fuzz>FT201 is one of my fav combos. I like it more than my BD101.

I have not yet fully tested all the functions of the RH301, it's really big and as soon as I start plugging several things I start playing away!
But so far, I can say that MIDI integration is excellent, it sends the clock to my Timefactor and Slicer and CTL-Sync spot on. CV wise it is neat too, Moogers like it and so does the Tracer City (they all told me!).
Subdivisions with their own output are greats but multiples are even more interesting with Trems or phasers. Really cool.
The only thing I need to suss out is the clock signal for Audio Sync (a la Jupiter III for instance). I have a Midi to audio converter from Touchprone but the audio is not great and I need to put it through a band-pass filter to isolate a signal that can trigger the Jupiter. I can build a small circuit that does that but that's more shit to plug and time to waste. if I can sort this last type of sync out, I can sync anything. So close...

so have you spent some time around the moog cp-251? i don't into midi, all of my monosynths are vintage and cv only so I keep it that way with everything...when possible. Do you think the RH301 would make the cp-251 redundant?

[Glenouille]

Do you already have them in sync? Is it something that you need to do?

I don’t think it make the CP251 redundant. There is a slight overlap but they are different animals.

If you need to sync different technologies (MIDI, Din, CV/Gate, etc.), and if you want all the synced stuff to run at different subdivisions/multiples, etc. of one unique master clock, The RH-301 is the one.

If you want to control some parameters via CV with a LFO it can still do it and the LFO controls go further on the RH-301 (more wave shapes, more control over the wave shape symmetry and rate, with a max frequency going way over 50Hz) but you are limited in the numbers of pedz you can interact with in this fashion so when it comes to mixing CVs and redistributing the output to several pedals/devices or manipulating several parameters via CV, the CP251 is the one.

With multiple Foogers, it makes plenty sense to have one. With a paraphernalia of different devices and sync methods it makes sense to have a RH301. With both shitloads of Foogers and plenty of other thingies, having both the CP251 and the Koma also makes sense. Though where is the white CP-251?!

[Uncle Grandfather]

Do you already have them in sync? Is it something that you need to do?

I don’t think it make the CP251 redundant. There is a slight overlap but they are different animals.

If you need to sync different technologies (MIDI, Din, CV/Gate, etc.), and if you want all the synced stuff to run at different subdivisions/multiples, etc. of one unique master clock, The RH-301 is the one.

If you want to control some parameters via CV with a LFO it can still do it and the LFO controls go further on the RH-301 (more wave shapes, more control over the wave shape symmetry, and rate with a max frequency going way over 50Hz) but you are limited in the numbers of pedz you can interact with in this fashion so when it comes to mixing CVs and redistributing the output to several pedals/devices or manipulating several parameters via CV, the CP251 is the one.

With multiple Foogers, it makes plenty sense to have one. With a paraphernalia of different devices and sync methods it makes sense to have a RH301. With both shitloads of Foogers and plenty of other thingies, having both the CP251 and the Koma also makes sense. Though where is the white CP-251?!

That's what I was afraid of, not using the rh301 to its full potential while I still like quite few features. Its just Im all cv and all my mono-synths and step sequencers and vintatge synthesisers etc i connect via cv. would be cool to have a master commander to combine my synth setup with my guitar set up...which is what i do when playing live anyways but with alot of wires and mixers.

A white 251 would look sharp with your koma backline...i'm kinda mad that koma's offering black now, at least on the 101. i would much rather have had a black 101, so now i have to get a white ft-201 cause I'm all weird like that. even my kommanders are all black? can't win for losing. that's something else I need to pick up is a couple more kommanders. i really like the expressive control they have over two parameters. its just delicious bananas hooked into my modular gear.

[univalve]

Kommander into moog Delay Time and exp in of The Second Voice is sooooo good.

[doommeow]

A couple of teaser pics because I'm a dork, but an excited dork... After decades of carpetgaze, this is going to be my first real board.

Almost done. The last pedal (until I can find a superego at a price I'm willing to pay ) finally arrived today from the great white north, and tomorrow I should be receiving the last of the cables I need. (re)Wired all the power cabling this evening, cable tied, etc. I need to get some smaller screws to hold the ties in place underneath, and some felt rubber or sumthin' for the bottom edges...

Anyway, you all know that feeling - hitting refresh on the tracking info, anticipating sonic madness.... Can't wait.

IMG_1379.jpg (348.17 KiB) Viewed 4645 times

IMG_1381.jpg (443.59 KiB) Viewed 4645 times

[Chankgeez]

I didn't realize you're actually a cat.

[OddKnowledge]

is it on a table or is your board a table?

oh wait those are chairs

[rustywire]

I didn't realize you're actually a cat.

[retinal orbita]

Whatever happened to the guy who had the pedalboard that looked like a surfboard....

[sonidero]

I didn't realize you're actually a cat.

I thought it was a goat when I first scrolled down...

Awesome Board man, that's a BEAST...

[goroth]

Seconded. Board is awesome.

[voerking]

i use zero pedals in my band, but here's how i rock it at home in my attic:

Ben Adrian Bunnylord > EB VP jr > Joyo tuner > ART tube pre amp > EHX .22 Caliber > Electrosonic 1X12" cab w/ a Warehouse ReaperHP. this little setup is surprisingly LOUD.

[Jero]

^Love that cab

[retinal orbita]

That Ace toy is sweeeeeeet

[Jwar]

Bam is where I be