Moderator: Ghost Hip
Bartimaeus wrote:Triangle, you could always use an expression pedal to adjust the delay volume in looper mode. You could definitely wire up a footswitch inside the pedal that when pressed switches between simulated "heel" or "toe" settings, and use that to control the tweez knob (switching it from 0 to full).
ALLisNOISE wrote:you can dial in some wonderfully smeared 12bit cascades of cicadas leveling a hail of rockets against an army of rusty box fans!
Triangle wrote:
The DL4 is mostly just used for looping. I really like the delay available in looping mode, but its impossible to use live because you can't turn it on and off. Does anyone know if there is a mod available to add a switch that would alternate the tweez knob (delay volume in loop mode) between 0 and the current setting?
Gigahearts_FX wrote:Triangle wrote:
The DL4 is mostly just used for looping. I really like the delay available in looping mode, but its impossible to use live because you can't turn it on and off. Does anyone know if there is a mod available to add a switch that would alternate the tweez knob (delay volume in loop mode) between 0 and the current setting?
Hi
You could do something whereby you add another potentiometer to the case somwhere, and have a footswitch to choose between two. You could then of course leave one at "zero".
if you wanted an LED indication with a 3PDT footswitch using this method you would need to leave Pin 1 connected to the PCB of the stock potentiometer, and use this a common point via a wire to pin 1 of your second pot.
Alternatively, because the board mounted PCBs on the Line6 have mounting tabs that are soldered in, you can lift all three legs of the stock potentiometer, and wire these to the poles of the footswitch. Using a 4PDT you could add an LED.
Alternatively you could ,aybe just wire a footswitch to "short" pins 1 and 3 of the potentiometer, which should make the resistance 0ohms across the pot, but that would rely on the Line 6 software looking at the total resistance.
I can probably take mine apart and have a play with that as its really the simplest of mods if it works.
both methods untested by me.
Ill have some free time later to draw a diagram if it helps.
ummohyeah wrote:Godspeed rule and no amount of tape would make their pedalboards safe from my cum.
ummohyeah wrote:Godspeed rule and no amount of tape would make their pedalboards safe from my cum.
BitchPudding wrote:how difficult would it be to add a momentary switch to make the DL4 repeat infinately? Kinda like how some delays have a "swell" switch.
Iommic Pope wrote:This is the best you've been.
Suffering suits you.
BitchPudding wrote:Let this be written in our history as proof that ILoveFuzz is one tight knit internet family.
Gunner Recall wrote:This thread is bad and everyone in it should feel bad.
Iommic Pope wrote:This thread is mediocre at best, but I encourage everyone posting in it to feel as awesome as possible.
hbombgraphics wrote:that's ridiculously cool
need some routing info if possible
love the A and B on the DD-20
Iommic Pope wrote:This is the best you've been.
Suffering suits you.
BitchPudding wrote:Let this be written in our history as proof that ILoveFuzz is one tight knit internet family.
Users browsing this forum: No registered users and 26 guests