by calfzilla » Tue Mar 06, 2018 8:56 am
your neck pocket is going to be a crap shoot. It could be too small and need to be sanded; it could be too large and need to be shimmed. It could be too shallow or too deep.
If you have a pair of calipers (or a micrometer and depth micrometer), I would measure the neck pocket and the heel of the neck and send those measurements to wherever you decide to buy.
If the holes end up being off, you can always fill and back drill through the body. If you don't have a drill press, I would suggest getting some bushing to "start" the holes and then hope the screw take the rest out when you install.
I, myself, am a shit post