E.V.A - C.V. Generator



Moderator: spruce_moose

Re: E.V.A - C.V. Generator

Postby spruce_moose » Wed Mar 01, 2017 8:58 am

I got a bit carried away with the photoshop..

Image

Here's a bit more of an explanation..

-The E.V.A. is a rechargeable pocket sized device that contains the C.V. component of the the Lightning Wave Modulation Interface.

Modulation waveforms and step sequences can be created on the device using the fader to track in real-time or select sequential levels respectively.

The interface allows two modes to be selected:

Auto - this loops the recording as an LFO pattern

Manual - the recording is triggered one time by the "Tap" sensor or by plugging in a standard tap tempo pedal, adapted to a 3.5mm plug.

Additional specifications:

Output:

1x 3.5mm mono - C.V. 0-5V
1x 3.5mm mono - C.V. 0-5V inverted
1x 3.5mm mono - BPM sync - V/S-trig selectable

Input:

5V to 9V DC centre-negative 2.1mm pin

1x 1x 3.5mm mono - BPM sync - V/S-trig selectable

Tap sensor - capacitive - tapped for tempo or held for sequence recording

Sub-divisions selectable between 1-8

Bypass sensor - capacitive

Tempo dial - pressed to cycle presets, held to record modes

45mm Fader

Charging:

900mAh LiPol - Charge time 5 Hours

Battery life approx. 15 hours
spruce_moose

User avatar
committed
committed
 
Posts: 235
Joined: Thu Mar 14, 2013 6:38 pm
Location: Dunedin, NZ

Re: E.V.A - C.V. Generator

Postby DRodriguez » Wed Mar 01, 2017 9:50 am

Yesss. So sexy. Any idea on the release date?
DRodriguez

User avatar
IAMILFFAMOUS
IAMILFFAMOUS
 
Posts: 3666
Joined: Thu Apr 09, 2015 1:40 pm
Location: Brooklyn

Re: E.V.A - C.V. Generator

Postby Iommic Pope » Wed Mar 01, 2017 10:04 am

Shut up and take my money.
WWPD?
fcknoise wrote:You are all fucking tryhard effort posting nerds

Invisible Man wrote:I'm probably the most humble person I know. I feel good about smelling my own butthole.

Jesus Was a Robot wrote:Did you just assume Billy Corgan's dildo preference??
Iommic Pope

User avatar
IAMILFFAMOUS
IAMILFFAMOUS
 
Posts: 11405
Joined: Tue Mar 05, 2013 8:41 pm
Location: Frimmin' on the Fram

Re: E.V.A - C.V. Generator

Postby baremountain » Wed Mar 01, 2017 11:18 am

Oh man this sounds great. I finished my CV amplifier too so I'm even more excited to have one of these on hand
Inner Vegas wrote:I don't think anyone is Obama

#wheresthebirthcertificate #obamahoax

solo tunes:
completed works || loosey goosey releases
associated acts:
Raab Zamboni (fake jazz/real noise//sax, modular synth, editing, misc) || Field Guide (my best friends//sax on 2 tracks)

I make t-shirts, patches, koozies, buttons, CDs, sometimes tapes, and eventually i'll start working on pedals again. DM me for pricing!
baremountain

User avatar
FAMOUS
FAMOUS
 
Posts: 1164
Joined: Mon Jun 27, 2016 2:19 pm
Location: Dallas, TX

Re: E.V.A - C.V. Generator

Postby jrfox92 » Wed Mar 01, 2017 12:34 pm

Iommic Pope wrote:Image
Since I always forget:

Inconuucl wrote:You can't kill Strymon, it'll just resurrect 3 days later.

BitchPudding wrote:Despite all my rage, I am still just eating tacos in a cage.

Inconuucl wrote:Welcome to ilf, we have three jokes and twelve posters. <3
jrfox92

User avatar
IAMILFFAMOUS
IAMILFFAMOUS
 
Posts: 4674
Joined: Sun Jun 22, 2014 11:23 am
Location: Akron, Ohio

Re: E.V.A - C.V. Generator

Postby Iommic Pope » Wed Mar 01, 2017 5:27 pm

Thanks bud.
I was on mobile. :thumb:
WWPD?
fcknoise wrote:You are all fucking tryhard effort posting nerds

Invisible Man wrote:I'm probably the most humble person I know. I feel good about smelling my own butthole.

Jesus Was a Robot wrote:Did you just assume Billy Corgan's dildo preference??
Iommic Pope

User avatar
IAMILFFAMOUS
IAMILFFAMOUS
 
Posts: 11405
Joined: Tue Mar 05, 2013 8:41 pm
Location: Frimmin' on the Fram

Re: E.V.A - C.V. Generator

Postby spruce_moose » Fri Mar 03, 2017 2:48 am

I'm having Disaster Area mill the Lwave cases and do samples for the EVA. If the holes are in the right place I'll reorder again straight away, but should be able to get 3 together in the next few weeks. I really need to stop speculating shipping dates though as it always seems to take way longer than I guess.

The packaging is sorted but I still have to reconfigure the instruction manual, which might take me half a week or so too..
spruce_moose

User avatar
committed
committed
 
Posts: 235
Joined: Thu Mar 14, 2013 6:38 pm
Location: Dunedin, NZ

Re: E.V.A - C.V. Generator

Postby Iommic Pope » Fri Mar 03, 2017 2:54 am

MOAR SPECULATION!
MOAR INTUITIVE CONTROLS!
LESS INSTRUCTION MANUALS, AND THEREFORE INFORMED OPERATION DELIVERING QUALITY AND FULL POTENTIAL FUNCTIONALITY!
WWPD?
fcknoise wrote:You are all fucking tryhard effort posting nerds

Invisible Man wrote:I'm probably the most humble person I know. I feel good about smelling my own butthole.

Jesus Was a Robot wrote:Did you just assume Billy Corgan's dildo preference??
Iommic Pope

User avatar
IAMILFFAMOUS
IAMILFFAMOUS
 
Posts: 11405
Joined: Tue Mar 05, 2013 8:41 pm
Location: Frimmin' on the Fram

Re: E.V.A - C.V. Generator

Postby Iommic Pope » Fri Mar 03, 2017 2:55 am

Jonny from 80 Tape personally sent me the instruction manual for my Limbo Proto.
I still don't know how to use it properly.
:picard:
WWPD?
fcknoise wrote:You are all fucking tryhard effort posting nerds

Invisible Man wrote:I'm probably the most humble person I know. I feel good about smelling my own butthole.

Jesus Was a Robot wrote:Did you just assume Billy Corgan's dildo preference??
Iommic Pope

User avatar
IAMILFFAMOUS
IAMILFFAMOUS
 
Posts: 11405
Joined: Tue Mar 05, 2013 8:41 pm
Location: Frimmin' on the Fram

Re: E.V.A - C.V. Generator

Postby spruce_moose » Fri Mar 03, 2017 9:09 pm

Haha I was ranting about how hard it is to write instruction manuals to him the other night. You should tag him :)
spruce_moose

User avatar
committed
committed
 
Posts: 235
Joined: Thu Mar 14, 2013 6:38 pm
Location: Dunedin, NZ

Re: E.V.A - C.V. Generator

Postby Iommic Pope » Fri Mar 03, 2017 10:46 pm

:lol:
He did good, I'm just a neanderthal.
WWPD?
fcknoise wrote:You are all fucking tryhard effort posting nerds

Invisible Man wrote:I'm probably the most humble person I know. I feel good about smelling my own butthole.

Jesus Was a Robot wrote:Did you just assume Billy Corgan's dildo preference??
Iommic Pope

User avatar
IAMILFFAMOUS
IAMILFFAMOUS
 
Posts: 11405
Joined: Tue Mar 05, 2013 8:41 pm
Location: Frimmin' on the Fram

Re: E.V.A - C.V. Generator

Postby colourofsound » Sun May 21, 2017 5:31 am

So is this basically a cooler, smaller more function-rich 8 Step Program? But with like, 255 steps instead of 8? ;) Very appealing
Music Person, Computer Person, Outdoor Person. Not always in that order :!!!:
https://christianwalker.me/
If you want mixing/mastering or session guitar work, I know about 1000 people on reddit who'll do that for nothing
colourofsound

involved
involved
 
Posts: 88
Joined: Thu Jan 26, 2017 6:17 am

Re: E.V.A - C.V. Generator

Postby Iommic Pope » Fri May 26, 2017 4:19 am

Im super keen on this, but is there a way to do power/voltage range to suit dwarfcraft shit?
WWPD?
fcknoise wrote:You are all fucking tryhard effort posting nerds

Invisible Man wrote:I'm probably the most humble person I know. I feel good about smelling my own butthole.

Jesus Was a Robot wrote:Did you just assume Billy Corgan's dildo preference??
Iommic Pope

User avatar
IAMILFFAMOUS
IAMILFFAMOUS
 
Posts: 11405
Joined: Tue Mar 05, 2013 8:41 pm
Location: Frimmin' on the Fram

Re: E.V.A - C.V. Generator

Postby UglyCasanova » Fri May 26, 2017 7:36 am

My body/MS-20m is ready! :zen:
UglyCasanova

User avatar
IAMILFFAMOUS
IAMILFFAMOUS
 
Posts: 12460
Joined: Mon Jul 28, 2014 6:47 am
Location: Norway

Re: E.V.A - C.V. Generator

Postby spruce_moose » Sun May 28, 2017 11:04 am

I'm not sure what the Dwarftcraft input range is. I use it on a ms10 that specifies +/-5V and still get plenty of range by only sending 0 to +5V.. Boss expression pedals appear to work between 0-3V it seems.
spruce_moose

User avatar
committed
committed
 
Posts: 235
Joined: Thu Mar 14, 2013 6:38 pm
Location: Dunedin, NZ

PreviousNext

Return to Lightning Wave



Who is online

Users browsing this forum: No registered users and 0 guests


Sponsored Ad. (Please no inflated/repetitive clicking. Thanks!)



ilovefuzz.com is not responsible for user-submitted content. Users participate at their own discretion and risk.