RMA Dirty Doper



Moderator: crochambeau

Re: RMA Dirty Doper

Postby jwar » Wed Jun 21, 2017 9:38 am

My pants!!! They are so tight right now! ;)
"My boner"

-Jwar

"You may caress my harem of large velvety hammers any time".

- The Velvet Hammer

"#I'mwithJwar"

-D.O.S.

"Also this thread is now on page 2399, and the pt2399 is the most used delay chip for most dirty delays. Coincidence? therefore 9/11".

-multi_s
jwar

User avatar
Supporter
Supporter
 
Posts: 14737
Joined: Thu Dec 02, 2010 7:18 pm
Location: Inside your mother

Re: RMA Dirty Doper

Postby JonnyAngle » Sat Jul 08, 2017 10:54 am

Photobucket is being super lame with the 3rd party hosting so we can't see the pix
JonnyAngle

User avatar
IAMILF
IAMILF
 
Posts: 2712
Joined: Wed Feb 25, 2015 11:35 am
Location: Maple Grove, MN

Re: RMA Dirty Doper

Postby Chankgeez » Sat Jul 08, 2017 12:08 pm

Phuck Photobucket!!! :mad:
Alice: balls have a ball to me to me to me to me to me to me to me to me
"You can't copyright circuits really." - Ed Sanner …………….0.............
"The effects market was really nothing more than a bunch of beggars and theives, all building off one another's work." - Dan Armstrong…...........................…
Sweet dealin's: here

I don't have a pedalboard. If I did, it'd be worth approximately 666 Metal Zones.
Chankgeez

User avatar
IAMILFFAMOUS
IAMILFFAMOUS
 
Posts: 29809
Joined: Tue Oct 11, 2011 1:40 am

Re: RMA Dirty Doper

Postby crochambeau » Sat Jul 08, 2017 2:50 pm

Yeah, I'll re-host the important images this weekend. So pissed about that, my global forum presence has utilized their service for going on 15 years now. Sadly, that history is NOT worth $400 a year.
crochambeau

User avatar
FAMOUS
FAMOUS
 
Posts: 1114
Joined: Mon Jul 20, 2015 12:49 pm
Location: Cascadia

Re: RMA Dirty Doper

Postby Chankgeez » Sat Jul 08, 2017 2:54 pm

Is that how much they want? :lol:

I haven't really looked into it. Maybe I should just delete my Photobucket account. Definitely not worth it for me. :|:
Alice: balls have a ball to me to me to me to me to me to me to me to me
"You can't copyright circuits really." - Ed Sanner …………….0.............
"The effects market was really nothing more than a bunch of beggars and theives, all building off one another's work." - Dan Armstrong…...........................…
Sweet dealin's: here

I don't have a pedalboard. If I did, it'd be worth approximately 666 Metal Zones.
Chankgeez

User avatar
IAMILFFAMOUS
IAMILFFAMOUS
 
Posts: 29809
Joined: Tue Oct 11, 2011 1:40 am

Re: RMA Dirty Doper

Postby crochambeau » Sat Jul 08, 2017 3:09 pm

Chankgeez wrote:Is that how much they want? :lol:

I haven't really looked into it. Maybe I should just delete my Photobucket account. Definitely not worth it for me. :|:


Yeah 3rd party hosting is only available to the HIGHEST TIER which is $39.99 per month, payable annually as a flat $400.

It's like they've decided to just crash their plane right into the mountain.

ANYWAY, since I'm not needlessly bumping this thread I want to talk about some of the changes I've implemented. Original Dirty Dopers had outboard wiring around the entire perimeter of the board.

Image

Image

This resulted in an inordinate amount of time burned on assembly, wading through a jungle like this:

Image

I was okay with that for a while, but at this point I'm spending more time designing than assembling and would really like to be able to run my days at about a 50/50 balance of manufacturing and development. This demands I abandon a lot of off board wiring for assembly efficiency:

Image

Contains PCB mount switches and pots. I know I've railed against this tactic in the past, but it's my ass in the sling and something had to give. Standard transferable warranty still abides.

The circuit is reconfigured a bit in the following ways:

Front end remains unchanged.
Upper fuzz line A has gone from a two stage to a three stage. It will feed a three position switch that assigns tone positions (from toppy to full bandwidth to heavy) - this channel will now feed a "dry" mix instead of channel A-B balance.
Lower fuzz line B has all of the above, and has lost the switch in "low pass" that did not work that well. Actual stages on this line are still PNP (as opposed to the NPN on line A) but are asymmetrically clipped per stage instead of having a back to back pair of like diodes as before.
I've ousted the polarity inversion on the lower line (this might go back in).
Instability section has a few tweaks, remains to be seen.
Power rails are separated between the sections, and CV control can be assigned to one of three, or two of three sections depending on switch position.

I think there's something else, but I'm about out the door... I hope to have some demonstrable prototypes built in about a month or so.

Oh yeah, two feedback paths for different (combinable) self oscillation modes.
crochambeau

User avatar
FAMOUS
FAMOUS
 
Posts: 1114
Joined: Mon Jul 20, 2015 12:49 pm
Location: Cascadia

Re: RMA Dirty Doper

Postby jwar » Sat Jul 08, 2017 4:05 pm

All I can say is

MY BONER!!!!
"My boner"

-Jwar

"You may caress my harem of large velvety hammers any time".

- The Velvet Hammer

"#I'mwithJwar"

-D.O.S.

"Also this thread is now on page 2399, and the pt2399 is the most used delay chip for most dirty delays. Coincidence? therefore 9/11".

-multi_s
jwar

User avatar
Supporter
Supporter
 
Posts: 14737
Joined: Thu Dec 02, 2010 7:18 pm
Location: Inside your mother

Re: RMA Dirty Doper

Postby Chankgeez » Sat Jul 08, 2017 4:15 pm

crochambeau wrote:Image



Yeah, jwar's boner is like a skyscraper of populated circuit boards. :lol: :love:

Making work easier is always good. :thumb:
Alice: balls have a ball to me to me to me to me to me to me to me to me
"You can't copyright circuits really." - Ed Sanner …………….0.............
"The effects market was really nothing more than a bunch of beggars and theives, all building off one another's work." - Dan Armstrong…...........................…
Sweet dealin's: here

I don't have a pedalboard. If I did, it'd be worth approximately 666 Metal Zones.
Chankgeez

User avatar
IAMILFFAMOUS
IAMILFFAMOUS
 
Posts: 29809
Joined: Tue Oct 11, 2011 1:40 am

Re: RMA Dirty Doper

Postby goroth » Sat Jul 08, 2017 4:23 pm

Sounds awesome!
oldangelmidnight wrote:If you've got joysticks on board, you don't need to justify your power supply to us.

My band /// Instagram ///Facebook ///
goroth

User avatar
HERO
HERO
 
Posts: 10461
Joined: Wed Jan 25, 2012 3:50 am
Location: Eurothrash: Frozen northern outpost.

Re: RMA Dirty Doper

Postby amnesiac305 » Tue Aug 22, 2017 8:08 am

:hello:
Excellent Transactions: monkeydancer, dorfmeister, Rygot, bronzetalon, PumpkinPieces, Wes Mantooth, Deltaphoenix, Blooghost, Fuzz_Pi, Neanderthal Head, lordgalvar
amnesiac305

User avatar
committed
committed
 
Posts: 496
Joined: Tue Nov 09, 2010 8:19 pm

Re: RMA Dirty Doper

Postby crochambeau » Tue Aug 22, 2017 1:02 pm

amnesiac305 wrote::hello:


I guess I owe everyone an update. :lol:

I drafted PCB mount pots based on some right angle dual gang 9mm parts I found reference & datasheet for, the minor detail I missed was availability and minimum order. So, this has put a pause on things while I juggle other builds and contemplate resolutions that do not involve a complete re-draw of the PCB traces after parts are wiggled around fatter pots.

I think I'm settled enough on a solution that I can dig into stuffing and fine tuning the new circuit to prove operation.

Thanks for the nudge!

:group:
crochambeau

User avatar
FAMOUS
FAMOUS
 
Posts: 1114
Joined: Mon Jul 20, 2015 12:49 pm
Location: Cascadia

Re: RMA Dirty Doper

Postby goroth » Tue Aug 22, 2017 3:42 pm

jwar wrote:All I can say is

MY BONER!!!!
oldangelmidnight wrote:If you've got joysticks on board, you don't need to justify your power supply to us.

My band /// Instagram ///Facebook ///
goroth

User avatar
HERO
HERO
 
Posts: 10461
Joined: Wed Jan 25, 2012 3:50 am
Location: Eurothrash: Frozen northern outpost.

Re: RMA Dirty Doper

Postby D.o.S. » Wed Aug 23, 2017 6:50 am

So stoked. Can't wait to do some AB testing.
NSFW: show
for easy reference:
Image

good deals are here.
escapecraft is here.

SPACERITUAL wrote:SKULL GOBLETS, PICS WITH SWORDS
BULLET BELTS AND PENTAGRAMSSSSSSS
SEPIA ARTWORK FOREST TOORCHESSSS
KING
D.o.S.

User avatar
IAMILFFAMOUS
IAMILFFAMOUS
 
Posts: 26847
Joined: Sun Jul 03, 2011 8:47 am
Location: Ewe-Kay

Previous

Return to Rochambeau Musical Apparatus



Who is online

Users browsing this forum: No registered users and 1 guest


Sponsored Ad. (Please no inflated/repetitive clicking. Thanks!)

Advertisements help support ILF


ilovefuzz.com is not responsible for user-submitted content. Users participate at their own discretion and risk.