4046-M



Moderator: intothegroove

Re: 4046-M

Postby vidret » Tue Feb 28, 2017 2:10 pm

UglyCasanova wrote:I did.

Image

Just try it. Could have been my proto. :idk:



ah was that with nothing into input > synth out>DBA>mod in>out?

In that case it was probably the synth being superweak, some settings i can't get to oscillate.

I thought you meant issues with playing into the 4046 with a pedal in the loop.
vidret

User avatar
IAMILFFAMOUS
IAMILFFAMOUS
 
Posts: 6200
Joined: Fri Oct 21, 2011 5:55 pm
Location: Skogen

Re: 4046-M

Postby Jwar » Tue Mar 28, 2017 7:12 pm

So just got one. Played it for literally one minute and boom. No sound. I was running it with just the input and output being used in my signal chain. Maxed the volume on it, read the manual, turned every knobs 60 times and nothing except super low volume noise. Pulled the output cable out and stuck it in the SDO, and it worked that way but cannot be bypassed. Tried running several different ways and this thing is not working like it ought to. I'm very disappointed. I waited a long time to get this and it's not doing shit.

Has anyone had this happen??
"I do not have the ability to think rationally 90% of the time and I also change my mind at the drop of a hat".

-JWAR :)
Jwar

User avatar
Cosmic of BILF
Cosmic of BILF
 
Posts: 16975
Joined: Thu Dec 02, 2010 7:18 pm
Location: Inside your mother

Re: 4046-M

Postby Jwar » Tue Mar 28, 2017 7:34 pm

Emailed Andrew as well.
"I do not have the ability to think rationally 90% of the time and I also change my mind at the drop of a hat".

-JWAR :)
Jwar

User avatar
Cosmic of BILF
Cosmic of BILF
 
Posts: 16975
Joined: Thu Dec 02, 2010 7:18 pm
Location: Inside your mother

Re: 4046-M

Postby raj007 » Tue Mar 28, 2017 7:39 pm

Where'd you buy from
popvulture wrote:Nothing is truer bypass than the void.


D.o.S wrote:Whenever I step on my tuner the shitty guitar playing stops.
raj007

User avatar
experienced
experienced
 
Posts: 724
Joined: Tue Nov 29, 2016 2:56 pm
Location: USA

Re: 4046-M

Postby Jwar » Tue Mar 28, 2017 7:44 pm

raj007 wrote:Where'd you buy from


From Honza in the Chezch Republic. East Stompbox. I'm going to open it up and see if a solder joint is bad. I know it's not his fault. It could be from being shipped so far.
"I do not have the ability to think rationally 90% of the time and I also change my mind at the drop of a hat".

-JWAR :)
Jwar

User avatar
Cosmic of BILF
Cosmic of BILF
 
Posts: 16975
Joined: Thu Dec 02, 2010 7:18 pm
Location: Inside your mother

Re: 4046-M

Postby Jwar » Wed Mar 29, 2017 9:00 pm

Andrew got back to me! So ill hopefully have some clips soon!! ;)
"I do not have the ability to think rationally 90% of the time and I also change my mind at the drop of a hat".

-JWAR :)
Jwar

User avatar
Cosmic of BILF
Cosmic of BILF
 
Posts: 16975
Joined: Thu Dec 02, 2010 7:18 pm
Location: Inside your mother

Re: 4046-M

Postby raj007 » Thu Mar 30, 2017 8:35 am

Is it working ok now?
popvulture wrote:Nothing is truer bypass than the void.


D.o.S wrote:Whenever I step on my tuner the shitty guitar playing stops.
raj007

User avatar
experienced
experienced
 
Posts: 724
Joined: Tue Nov 29, 2016 2:56 pm
Location: USA

Re: 4046-M

Postby Jwar » Thu Mar 30, 2017 9:06 am

raj007 wrote:Is it working ok now?


Going to send him a clip of what it's doing.

I didn't have time yesterday (well I did but I worked out so hard that I thought I was going to die half the night LOL).

It will be ok though!! :) Luckily I can trouble shoot some of it myself, but if it's too involved, Andrew will take care of it.

Thanks!
"I do not have the ability to think rationally 90% of the time and I also change my mind at the drop of a hat".

-JWAR :)
Jwar

User avatar
Cosmic of BILF
Cosmic of BILF
 
Posts: 16975
Joined: Thu Dec 02, 2010 7:18 pm
Location: Inside your mother

Re: 4046-M

Postby intothegroove » Sat Apr 01, 2017 11:26 am

Hey Everyone

It's been a long while since I've posted and been on here and I apologize for that. I'm fucken burnt out, have been buried in orders for over a year and have been trying to get to a place where I can breath for a minute but it's been rough. I have another guy helping me build but it's been impossible to find other people locally to help out so it's been rough. I've had major PCB issues with the 46 a few months ago so that totally screwed me up, I still want to honour the deal with the list on here but it's going to take some time unfortunately. I will be discontinuing the 46 soon because there is no way I can introduce a new pedal and keep up with these orders, I will however be bringing it back in the future with a new design. Thanks so much for your understanding, continued support and patience!
intothegroove

User avatar
FAMOUS
FAMOUS
 
Posts: 1662
Joined: Thu Jul 08, 2010 6:05 pm
Location: The Junction

Re: 4046-M

Postby worra » Sun Apr 02, 2017 6:07 pm

Keep fighting the good fight dude, your stuff is awesome.

Had some great fun with the 4046-M today. Fed it mode 2 from a CT5, then a Goatkeeper after the 4046:

https://sunbeamer.bandcamp.com
https://www.instagram.com/_sunbeamer/
YouTube demos and such

DRodriguez wrote:home is where the noise is

aen wrote:I'm pretty much kicked out of hipster beverage town.
worra

User avatar
FAMOUS
FAMOUS
 
Posts: 1244
Joined: Mon Dec 05, 2016 10:22 pm
Location: ATX

Re: 4046-M

Postby Jwar » Tue Apr 04, 2017 3:09 pm

God that looks fun!!! Miss my Goatkeeper so much now! Damn you!


Andrew, you know we all love you bro!
"I do not have the ability to think rationally 90% of the time and I also change my mind at the drop of a hat".

-JWAR :)
Jwar

User avatar
Cosmic of BILF
Cosmic of BILF
 
Posts: 16975
Joined: Thu Dec 02, 2010 7:18 pm
Location: Inside your mother

Re: 4046-M

Postby MrNovember » Tue Apr 04, 2017 6:38 pm

I finally have a 4046-m on the way! Is there anywhere I can find the manual online so I can prepare?
Edit: nevermind, I forgot how thorough Knobs' demo was. Damn I am excite :!!!:
MrNovember

User avatar
Modulae of BILF
Modulae of BILF
 
Posts: 3443
Joined: Wed Apr 17, 2013 2:24 pm
Location: GTA

Re: 4046-M

Postby cantremember » Tue Apr 04, 2017 7:05 pm

MrNovember wrote:I finally have a 4046-m on the way! Is there anywhere I can find the manual online so I can prepare?
Edit: nevermind, I forgot how thorough Knobs' demo was. Damn I am excite :!!!:


I believe you can also find the manuals for all 3 industrialectric pedals under the supporters section on his website.
cantremember

User avatar
Lagom Gigantic Lurker of BILF
Lagom Gigantic Lurker of BILF
 
Posts: 196
Joined: Sun Oct 04, 2015 11:50 am
Location: Az

Re: 4046-M

Postby Kojak the Ripper » Wed Apr 05, 2017 2:45 am

just ordered a 4046-M and a RM-1N !!! maybe that's why i'm so happy ?
Kojak the Ripper

interested
interested
 
Posts: 16
Joined: Mon Apr 03, 2017 5:26 pm

Re: 4046-M

Postby intothegroove » Wed Apr 05, 2017 11:19 am

worra wrote:Keep fighting the good fight dude, your stuff is awesome.

Had some great fun with the 4046-M today. Fed it mode 2 from a CT5, then a Goatkeeper after the 4046:



AMAZING!!! THANK YOU SO MUCH! :omg: :excellent:
intothegroove

User avatar
FAMOUS
FAMOUS
 
Posts: 1662
Joined: Thu Jul 08, 2010 6:05 pm
Location: The Junction

PreviousNext

Return to Industrialectric



Who is online

Users browsing this forum: No registered users and 1 guest


Sponsored Ad. (Please no inflated/repetitive clicking. Thanks!)

Advertisements help support ILF


ilovefuzz.com is not responsible for user-submitted content. Users participate at their own discretion and risk.