4046-M



Moderator: intothegroove

Re: 4046-M

Postby intothegroove » Fri Jun 02, 2017 12:04 pm

raj007 wrote:Industrialectric makes me go 100% wet.

:omg: :excellent:
intothegroove

User avatar
FAMOUS
FAMOUS
 
Posts: 1649
Joined: Thu Jul 08, 2010 6:05 pm
Location: The Junction

Re: 4046-M

Postby yeatsvisitslincoln » Mon Sep 04, 2017 11:02 am

So the synth side of mine died :cry:

The modulator still works, though. I tried the input into MI and got sound out there. The inside looks fine, doesn't smell like anything blew up... I'm really not sure what happened. I know Andrew's had some trouble with these, but anyone had a similar issue?
yeatsvisitslincoln

User avatar
committed
committed
 
Posts: 181
Joined: Thu Feb 18, 2016 4:26 pm
Location: Magic Land

Re: 4046-M

Postby MrNovember » Mon Sep 04, 2017 12:43 pm

yeatsvisitslincoln wrote:So the synth side of mine died :cry:

The modulator still works, though. I tried the input into MI and got sound out there. The inside looks fine, doesn't smell like anything blew up... I'm really not sure what happened. I know Andrew's had some trouble with these, but anyone had a similar issue?

I had the opposite happen to me. The modulator side died. Andrew shipped me some ICs to swap out and it worked fine after that. All the ICs are easy to swap out without soldering
MrNovember

User avatar
IAMILF
IAMILF
 
Posts: 2930
Joined: Wed Apr 17, 2013 2:24 pm
Location: GTA

Re: 4046-M

Postby yeatsvisitslincoln » Tue Sep 05, 2017 3:49 pm

MrNovember wrote:
yeatsvisitslincoln wrote:So the synth side of mine died :cry:

The modulator still works, though. I tried the input into MI and got sound out there. The inside looks fine, doesn't smell like anything blew up... I'm really not sure what happened. I know Andrew's had some trouble with these, but anyone had a similar issue?

I had the opposite happen to me. The modulator side died. Andrew shipped me some ICs to swap out and it worked fine after that. All the ICs are easy to swap out without soldering


Good to know! Talking to Andrew now, so I'm sure we'll figure this out.
yeatsvisitslincoln

User avatar
committed
committed
 
Posts: 181
Joined: Thu Feb 18, 2016 4:26 pm
Location: Magic Land

Re: 4046-M

Postby intothegroove » Tue Nov 28, 2017 11:58 am

Hey everyone, just wanted to give an update on the list for the discounted 4046-M's, I'm finishing up the last of the circuit boards and have contacted everyone on the list. If you're interested please send me a PM and I'll get one built up for you! Thanks so much for your patience!
intothegroove

User avatar
FAMOUS
FAMOUS
 
Posts: 1649
Joined: Thu Jul 08, 2010 6:05 pm
Location: The Junction

Re: 4046-M

Postby Jesus Was a Robot » Wed Nov 29, 2017 10:51 am

No need to contact me homie! I got another 4046. :)

I'm going to etch that sucker too. :)
"My boner"

-Jwar

"You may caress my harem of large velvety hammers any time".

- The Velvet Hammer

"#I'mwithJwar"

-D.O.S.

"Also this thread is now on page 2399, and the pt2399 is the most used delay chip for most dirty delays. Coincidence? therefore 9/11".

-multi_s

"The only thing I can muster after reading this thread:

Thanks Obama"

-raj007
Jesus Was a Robot

User avatar
Supporter
Supporter
 
Posts: 15826
Joined: Thu Dec 02, 2010 7:18 pm
Location: Inside your mother

Re: 4046-M

Postby intothegroove » Wed Nov 29, 2017 1:17 pm

Jesus Was a Robot wrote:No need to contact me homie! I got another 4046. :)

I'm going to etch that sucker too. :)


:thumb: :joy:
intothegroove

User avatar
FAMOUS
FAMOUS
 
Posts: 1649
Joined: Thu Jul 08, 2010 6:05 pm
Location: The Junction

Previous

Return to Industrialectric



Who is online

Users browsing this forum: No registered users and 1 guest


Sponsored Ad. (Please no inflated/repetitive clicking. Thanks!)

Advertisements help support ILF


ilovefuzz.com is not responsible for user-submitted content. Users participate at their own discretion and risk.