ilovedoom @ ilovefuzz
Sun Oct 18, 2015 7:01 pm
I think that looks really nice, man.
Sun Oct 18, 2015 11:16 pm
looks nice. I like that Oxblood as well. used it on a couple of cabs.
Mon Oct 19, 2015 1:23 pm
Anyone putting tonecvlt in their git boxes yet?
Thu Oct 29, 2015 5:23 pm
Not really a cab build, but I did make a new grill for a beat up V2 cab that I've recently acquired. Wasn't my first choice, but this oxblood/silver cloth at Mojotone was only like $2.50 per yard, so I couldn't pass that up. Looks nice with the figured maple Home Depot had, at least.
very nice - I like that maple a lot
Fri Nov 20, 2015 9:12 am
Anyone have tips for preventing blowout when cutting dovetails on baltic birch?
Im using a leigh jig and driving myself insane with this.
Router is a single speed porter cable. Bits are new and made by leigh.
Whats the secret?!
Edit: Google suggests I am not the only one with this issue and that:
1.Starting with a climbing cut and
2. Keeping the back board pressed against the piece
should eliminate this problem.
Does anyone have any additional tips?
Fri Nov 20, 2015 1:03 pm
Maybe clamping a strip of scrap plywood to the back might help.
Fri Nov 20, 2015 2:10 pm
Wed Dec 02, 2015 9:13 pm
So using both back and front boards, tearout was totally avoidable. My pins came out great, but I failed to use the front board for the tails since any tearout that would occur would end up on the inside. Regardless, I'm happy with the results.
Going for a straight Janice rip-off. Bracing and baffle are next!
Wed Dec 02, 2015 10:07 pm
Fri Dec 11, 2015 2:41 pm
I'm going to re-tolex a Marshall VS412 cab that I bought off someone who had it covered in duct tape. By my calcs, the dimensions of the 3 sides that need to be covered are 0.95 square yards. I'm assuming that I'm just asking for trouble if I only buy 1 square yard of tolex, correct?
Fri Dec 11, 2015 4:25 pm
that doesn't sound nearly enough. more like 1.2 if you buy it by the square yard 1.5 if you do all 4 sides, which honestly you should if you are going to retolex it, don't half ass it by leaving a side. if you go with the square yard.that way you cut it in half and get the total you need but you have more seems. But some vendors sell it cut down to cab size, meaning it's 18in wide. if that's the case then you need 3 yard
Fri Dec 11, 2015 5:23 pm
Thanks SLK. I appreciate the help. I'm going to use purple tolex. Any particular vendors you recommend?
Fri Dec 11, 2015 7:43 pm
I like speakerbuildersupply but they are limited.
going with guys on ebay has better results because ordering from mojotone in a small amount... you might as well just buy a whole new cab.
Fri Dec 11, 2015 9:09 pm
Speakerbuildersupply had what I needed. Thanks!
Sat Dec 12, 2015 9:09 pm
you are very welcome!
Powered by phpBB © phpBB Group.
phpBB Mobile / SEO by Artodia.