Dr pr0n: It's a Synth Party



Dr pr0n: It's a Synth Party

Postby Narwhal-Industries » Mon Oct 15, 2012 3:30 pm

Image
Narwhal-Industries

User avatar
committed
committed
 
Posts: 272
Joined: Wed Jul 13, 2011 3:48 pm
Location: Central Pennsylvania

Re: It's a Synth Party

Postby Narwhal-Industries » Fri Oct 19, 2012 11:56 am

After a year of R&D our ring-mod/Analog synth pedal is in beta. We a going to make a limited run of twenty pedals. The pedal will be called the "Dr pr0n - Harmonic Integrator". The price will be $300 US but we will include free shipping. The controls will be Frequency, Fine Tune, Wet/Dry Mix and Volume. It will include an expression pedal input designed for the Boss FV-500H. As alway with our pedals it will have battery and a standard 9V DC jack. Battery life should be many, many hours.
Image
Narwhal-Industries

User avatar
committed
committed
 
Posts: 272
Joined: Wed Jul 13, 2011 3:48 pm
Location: Central Pennsylvania

Re: Dr pr0n: It's a Synth Party

Postby Narwhal-Industries » Fri Oct 26, 2012 12:26 pm

Prototype 1 of 4 is complete. After the first four prototypes we will make sixteen production models, each one with art from a different artist.
Image
Narwhal-Industries

User avatar
committed
committed
 
Posts: 272
Joined: Wed Jul 13, 2011 3:48 pm
Location: Central Pennsylvania

Re: Dr pr0n: It's a Synth Party

Postby Deltaphoenix » Mon Oct 29, 2012 10:29 pm

Was that Demo recorded with a bass?

What will the expression pedal control?
behndy wrote:i want to have dirty sex with each and every mod here. in their poopcunt. while squirls shoot out of my dick and tinier squirrels shoot out of THEIR dicks in an Escher-esque recursive love filth pile.


My Band: http://www.reverbnation.com/#!/capturetherapture

My Solo Electronic Stuff:http://www.reverbnation.com/#!/deltaphoenix
Deltaphoenix

User avatar
Supporter
Supporter
 
Posts: 4660
Joined: Sun Dec 04, 2011 1:38 am
Location: Gainesville, Fl

Re: Dr pr0n: It's a Synth Party

Postby Narwhal-Industries » Mon Oct 29, 2012 10:52 pm

Yes it was recorded with bass direct into my sound card. Later this week I'll record another more real clip with a current prototype. Dr pron will have an exp pedal jack, as both prototypes do. I'm working on modding the VCO for CV and Gate inputs. Which should be no big deal as I have already used the exp jack for CV and an external LFO input. Were 90% There. My goal was to have one working prototype that I could hand over to anyone to try out by Christmas. I shattered that goal last week.
:picard:
Exp Pedal will control the VCO frequecy
Image
Narwhal-Industries

User avatar
committed
committed
 
Posts: 272
Joined: Wed Jul 13, 2011 3:48 pm
Location: Central Pennsylvania

Re: Dr pr0n: It's a Synth Party

Postby Deltaphoenix » Mon Oct 29, 2012 11:20 pm

:thumb: Very cool. I play bass and love pedal like this, I have a Mothership and a FreqBox. I am going to follow this thread.
behndy wrote:i want to have dirty sex with each and every mod here. in their poopcunt. while squirls shoot out of my dick and tinier squirrels shoot out of THEIR dicks in an Escher-esque recursive love filth pile.


My Band: http://www.reverbnation.com/#!/capturetherapture

My Solo Electronic Stuff:http://www.reverbnation.com/#!/deltaphoenix
Deltaphoenix

User avatar
Supporter
Supporter
 
Posts: 4660
Joined: Sun Dec 04, 2011 1:38 am
Location: Gainesville, Fl

Re: Dr pr0n: It's a Synth Party

Postby Narwhal-Industries » Fri Nov 02, 2012 7:36 pm

I'm going to build another prototype on Monday. We may change the fine tune control to VCO Range. That was you'll be able to set the top and bottom limit for the expression pedal.
Image
Narwhal-Industries

User avatar
committed
committed
 
Posts: 272
Joined: Wed Jul 13, 2011 3:48 pm
Location: Central Pennsylvania

Re: Dr pr0n: It's a Synth Party

Postby Narwhal-Industries » Mon Nov 12, 2012 1:20 pm

I designed and tested a new VCO that I will use for Dr pr0n. The new oscillator not only uses one less IC but will have 1 volt per octave CV. It played in tune with my Arp Odyssey. Don't know if I'll get the total redesign done by Christmas but we'll be close. I'll be sure to post updates.
Image
Narwhal-Industries

User avatar
committed
committed
 
Posts: 272
Joined: Wed Jul 13, 2011 3:48 pm
Location: Central Pennsylvania

Re: Dr pr0n: It's a Synth Party

Postby Bellyheart » Mon Nov 12, 2012 1:57 pm

What shape is the wave?
Bellyheart

User avatar
IAMILFFAMOUS
IAMILFFAMOUS
 
Posts: 5754
Joined: Mon Nov 10, 2008 11:23 pm
Location: Richmond, Va

Re: Dr pr0n: It's a Synth Party

Postby Narwhal-Industries » Mon Nov 12, 2012 4:22 pm

Bellyheart wrote:What shape is the wave?

Square. The modulator that I am using will only work with square wave on the Y input(carrier) but will except any signal for the X input.
Image
Narwhal-Industries

User avatar
committed
committed
 
Posts: 272
Joined: Wed Jul 13, 2011 3:48 pm
Location: Central Pennsylvania

Re: Dr pr0n: It's a Synth Party

Postby Narwhal-Industries » Thu Nov 15, 2012 2:21 pm

I'm working on adding a sine wave LFO to Dr pr0n. I new VCO design has been working really well. VCO range is 100Hz - 10KHz.
Image
Narwhal-Industries

User avatar
committed
committed
 
Posts: 272
Joined: Wed Jul 13, 2011 3:48 pm
Location: Central Pennsylvania

Re: Dr pr0n: It's a Synth Party

Postby Deltaphoenix » Mon Nov 19, 2012 11:59 pm

FullCustom wrote:I'm working on adding a sine wave LFO to Dr pr0n. I new VCO design has been working really well. VCO range is 100Hz - 10KHz.


SWEET...more clips soon?
behndy wrote:i want to have dirty sex with each and every mod here. in their poopcunt. while squirls shoot out of my dick and tinier squirrels shoot out of THEIR dicks in an Escher-esque recursive love filth pile.


My Band: http://www.reverbnation.com/#!/capturetherapture

My Solo Electronic Stuff:http://www.reverbnation.com/#!/deltaphoenix
Deltaphoenix

User avatar
Supporter
Supporter
 
Posts: 4660
Joined: Sun Dec 04, 2011 1:38 am
Location: Gainesville, Fl

Re: Dr pr0n: It's a Synth Party

Postby Narwhal-Industries » Mon Nov 26, 2012 11:44 am

I'll see what I can do this week; I have the 2.0 design on a bread board. I'm hoping to finish the final PCB design by the end of the week.
Image
Narwhal-Industries

User avatar
committed
committed
 
Posts: 272
Joined: Wed Jul 13, 2011 3:48 pm
Location: Central Pennsylvania

Re: Dr pr0n: It's a Synth Party

Postby Deltaphoenix » Wed Dec 05, 2012 2:57 pm

Anymore updates?
behndy wrote:i want to have dirty sex with each and every mod here. in their poopcunt. while squirls shoot out of my dick and tinier squirrels shoot out of THEIR dicks in an Escher-esque recursive love filth pile.


My Band: http://www.reverbnation.com/#!/capturetherapture

My Solo Electronic Stuff:http://www.reverbnation.com/#!/deltaphoenix
Deltaphoenix

User avatar
Supporter
Supporter
 
Posts: 4660
Joined: Sun Dec 04, 2011 1:38 am
Location: Gainesville, Fl

Re: Dr pr0n: It's a Synth Party

Postby Narwhal-Industries » Wed Dec 05, 2012 5:42 pm

I'm halfway done with the new board layout. As you can see we have a new logo. Some of my time have been taken up by our move to re-brand the pedal line. But we are still moving forward with Dr pr0n and Poseidon.
Image
Narwhal-Industries

User avatar
committed
committed
 
Posts: 272
Joined: Wed Jul 13, 2011 3:48 pm
Location: Central Pennsylvania

Next

Return to Narwhal-Industries



Who is online

Users browsing this forum: No registered users and 1 guest


Sponsored Ad. (Please no inflated/repetitive clicking. Thanks!)

Advertisements help support ILF


ilovefuzz.com is not responsible for user-submitted content. Users participate at their own discretion and risk.