Page 1 of 11

EGC Bolt-on Neck Projects

PostPosted: Fri Mar 03, 2017 3:46 pm
by antennafarm
It turns out that a few of us got onto this run of EGC's bolt-on necks. So I thought, why not make a thread of this particular piece of awesomeness?

Who's getting one?

What are you planning for it?

Post pictures when you can!

Re: EGC Bolt-on Neck Projects

PostPosted: Fri Mar 03, 2017 4:31 pm
by kosta
Awesome idea. I'll post mine in here when they're done.

Re: EGC Bolt-on Neck Projects

PostPosted: Fri Mar 03, 2017 10:52 pm
by codetocontra
Paid my invoice this week. Have a tele body waiting.

Re: EGC Bolt-on Neck Projects

PostPosted: Sat Mar 04, 2017 1:13 am
by antennafarm
I paid mine today. H @ EGC said that, assuming no interruptions in production/finishing, that mine'll be shipped out the week of the 20th.

Re: EGC Bolt-on Neck Projects

PostPosted: Sat Mar 04, 2017 1:46 am
by codetocontra
Really? Did they ask if you wanted the final invoice? She mentioned mine would be done in "a day or so." That was Tuesday. Yeah, I expect to wait too.

Re: EGC Bolt-on Neck Projects

PostPosted: Sat Mar 04, 2017 11:56 am
by cantremember
I got in on this run and I plan to build up a jazzmaster. This is gonna be my first attempt at building something from scratch so I'm nervous and excited at the same time! I will definitely follow this thread and post updates on how things are going.

Re: EGC Bolt-on Neck Projects

PostPosted: Sat Mar 04, 2017 1:02 pm
by antennafarm
codetocontra wrote:Really? Did they ask if you wanted the final invoice? She mentioned mine would be done in "a day or so." That was Tuesday. Yeah, I expect to wait too.


I asked them for the final invoice since I had the money, and then asked for an estimate on shipping.

They ARE being sent out. A dude on the Aluminum axes FB group posted his, mounted to a Mascis JM body. Ooof!!!

Re: EGC Bolt-on Neck Projects

PostPosted: Sat Mar 04, 2017 1:07 pm
by codetocontra
Hmmm. Normally they send tracking info but I did receive a pickguard without it once. I am pretty sure I was in the original order geoup when it was just going to be 15. But I really dont know anything. Hopes are now up that Fed Ex drops by today.

Re: EGC Bolt-on Neck Projects

PostPosted: Sat Mar 04, 2017 4:18 pm
by antennafarm
Just saw a second one on the FB group, so they're definitely going out! This one was mounted to a P90 neck tele.

Re: EGC Bolt-on Neck Projects

PostPosted: Mon Mar 06, 2017 11:18 am
by Olin
Seen three people who have received theirs so far, Kevin said they've shipped 9 so far. Didn't want to pester Hillary with questions but figure it's gotta be here before the end of the month. I got a 24" neck which will be going on a custom body I did which is meant to be somewhere between a Mustang and a Jagstang. Pretty high anticipation levels currently.

Re: EGC Bolt-on Neck Projects

PostPosted: Wed Mar 08, 2017 6:19 pm
by Aquietcabin1978
Can't wait to see these projects. I wanted to get in on this run but forgot all about it.

Re: EGC Bolt-on Neck Projects

PostPosted: Thu Mar 09, 2017 8:54 pm
by codetocontra
Image

Re: EGC Bolt-on Neck Projects

PostPosted: Thu Mar 09, 2017 9:30 pm
by antennafarm
Hot damn.

What pickups are going into it?

Re: EGC Bolt-on Neck Projects

PostPosted: Thu Mar 09, 2017 10:53 pm
by codetocontra
I bought an EGC bridge pickup (shown there with tape on it). Was actually thinking about putting a Sustainiac in the neck. I have a lot of work to do to make this all work. The pickguard doesn't fit quite right and the bridge pickup cavity needs moved a bit away from the bridge.

Suprised that this neck is pretty heavy and relatively thick. Maybe similar to my old SG Standard. I am used to my EGC thin neck now.

*edit: purchased BRIDGE pickup, not neck. I'm dumb.

Re: EGC Bolt-on Neck Projects

PostPosted: Fri Mar 10, 2017 2:52 pm
by antennafarm
Can you post pictures comparing the thickness? I should be OK, my LP has a kind of thick neck, but am a little sad it's not the EGC thin!