Guitar tech, wiring, maintenance, projects, SOS calls, and more!
Wed Jan 11, 2017 4:03 am
Hey all.
Im thinking of continuing to modify my sg further with a arcade button style killswitch. Anyone know how I would go about doing that and where I could buy said switch? Preferably I would like to get one in black or white if possible. Thoughts/recommendations?
Wed Jan 11, 2017 5:09 pm
Sanwa arcade buttons are the standard for arcade buttons. I like the silent line for my weird projects. Hardest part is most arcade buttons are fairly deep, not sure if the SG is deep enough. Also find a 30mm drill bit.
The actual wiring of a kill switch is super easy once you find your switch.
Last edited by
DRodriguez on Wed Jan 11, 2017 6:10 pm, edited 1 time in total.
Wed Jan 11, 2017 5:43 pm
sanwa makes 24 mm buttons too
Wed Jan 11, 2017 11:41 pm
See thats what I was worried about, the depth of the button. Would 24mm be the right depth?
Thu Jan 12, 2017 1:28 am
SPST switch,
terminals as follow
[empty] [from switch/hot] [to output]
Thu Jan 12, 2017 7:30 am
Actually, most arcade buttons just have 2 terminals. And a better way to wire it a would be [from jack hot] [from Jack ground]. That will eliminate any hum issues you would get.
And I believe the depth on the 24mm buttons is still the same
Thu Jan 12, 2017 10:21 am
Word. Guess ill have to find some that are more geared for guitars then. Thats ok tho.
Powered by phpBB © phpBB Group.
phpBB Mobile / SEO by Artodia.