1-Spot hum with Oxide?



Moderator: Taylor Livingston

1-Spot hum with Oxide?

Postby aetheriac » Thu Sep 15, 2016 12:17 am

I've run my Oxide #13 through a couple of one spots on a couple different boards in the past 2 days.
Both times it added a wicked ground loop hum. Is that normal for the Oxide? I swear I've had it on
one spots before and it didn't do that.

On another note, running the Oxide into a Supercollider is an amazing experience, hum or not!!!
aetheriac

User avatar
interested
interested
 
Posts: 40
Joined: Wed Mar 02, 2016 10:09 am

Re: 1-Spot hum with Oxide?

Postby Jesus Was a Robot » Thu Sep 15, 2016 8:52 am

No it's not normal in my experience with the pedal. Could be your wall plugs or could be something faulty with the pedal. Try plugging it into a different outlet in your home or even a friends home. Power can be finicky as fuck. It's annoying.
"My boner"

-Jwar

"You may caress my harem of large velvety hammers any time".

- The Velvet Hammer

"#I'mwithJwar"

-D.O.S.

"Also this thread is now on page 2399, and the pt2399 is the most used delay chip for most dirty delays. Coincidence? therefore 9/11".

-multi_s

"The only thing I can muster after reading this thread:

Thanks Obama"

-raj007
Jesus Was a Robot

User avatar
Supporter
Supporter
 
Posts: 15629
Joined: Thu Dec 02, 2010 7:18 pm
Location: Inside your mother

Re: 1-Spot hum with Oxide?

Postby Taylor Livingston » Thu Sep 15, 2016 1:23 pm

That's a very early one! No, it shouldn't hum. If you're not able to sort out the source of the hum experimenting with your power supplies and other pedals on the same supply, please email me at info at ironether dot com and I'll help you get that fixed.
Taylor Livingston

User avatar
committed
committed
 
Posts: 176
Joined: Wed May 05, 2010 1:19 pm

Re: 1-Spot hum with Oxide?

Postby aetheriac » Fri Sep 16, 2016 8:53 am

Taylor Livingston wrote:That's a very early one! No, it shouldn't hum. If you're not able to sort out the source of the hum experimenting with your power supplies and other pedals on the same supply, please email me at info at ironether dot com and I'll help you get that fixed.


Thanks Taylor, I will certainly do that.
Tomorrow I should be able to figure out more.
aetheriac

User avatar
interested
interested
 
Posts: 40
Joined: Wed Mar 02, 2016 10:09 am


Return to Iron Ether



Who is online

Users browsing this forum: No registered users and 1 guest


Sponsored Ad. (Please no inflated/repetitive clicking. Thanks!)

Advertisements help support ILF


ilovefuzz.com is not responsible for user-submitted content. Users participate at their own discretion and risk.