Oxide "versions"



Moderator: Taylor Livingston

Oxide "versions"

Postby Lebowsky » Tue Feb 27, 2018 2:54 pm

Hi there,

it seems there is / was (was is discontinued?) two versions of the Oxide, one with side jacks and one with top jacks. Was there any difference in the circuit over the years, or was it only a design change?

Thanks:)
Gibson Ripper + GK 1001RB-II / 210RBH / 115RBH
Lebowsky

User avatar
committed
committed
 
Posts: 147
Joined: Wed Nov 06, 2013 1:03 pm
Location: Lausanne, Switzerland

Re: Oxide "versions"

Postby Taylor Livingston » Wed Feb 28, 2018 12:17 am

Kind of complicated - the top jack layout was sort of a custom option from the very beginning when the pedal originally came out. Then in the later years I only ever built the top jack version.

Separate from the layout, there were some minor tweaks to the circuit in the first few years it was available. This was just in response to feedback from users regarding output volume and high frequency content. So, a couple of the earliest ones might be a little quiet or crazy loud before I found the sweet spot that works for everybody's instruments and settings. No changes were made from about 2012 onward.
Taylor Livingston

User avatar
committed
committed
 
Posts: 177
Joined: Wed May 05, 2010 1:19 pm


Return to Iron Ether



Who is online

Users browsing this forum: No registered users and 1 guest


Sponsored Ad. (Please no inflated/repetitive clicking. Thanks!)

Advertisements help support ILF


ilovefuzz.com is not responsible for user-submitted content. Users participate at their own discretion and risk.