Seten wrote:Thanks so much! If I wanted to add a feedback control on a switch with a knob to control amount is this all I would need to do? I'm a little confused because every schematic I've seen for a feedback looper doesn't connect the return tip directly to the spdt switch but rather to the lug on the stomp switch that is connected to the return jack when the switch is engaged. I can't think of why you would do this.
yeah you might find a feedback looper that is wired that way. the return jack is usually coming out of some delay pedal that is next to the feedback looper. the send jack is usually the input of a delay or a pedal board. the return is also wired to the output of the feedback looper. and the input of the feedback looper is wired to the send. so when you press that switch all the shit is connected to all the other shit directly with copper wires 4 ways party time.
you can put the 500KB feedback pot on either side of the footswitch. it makes no difference. if you want a master volume on the feedback looper you can just stick it before the feedback looper output jack tip. if you want true bypass of the volume knob then that is a whole thing on top of a thing.