Mon Jan 01, 2018 9:44 pm
BitchPudding wrote:And if you could recommend me a breadboard like what you described that would be pimp.
Mon Jan 01, 2018 11:30 pm
Tue Jan 02, 2018 1:05 am
Tue Jan 02, 2018 1:49 am
Tue Jan 02, 2018 4:10 am
LaoWiz wrote:Here's my BB setup with a PLL on a massive breadboard. And here's a description of sorts:
I chose this enclosure as I wanted to have common pot values but realized that there's just too many pot values and you're always going to be missing something and I was snagging pots for projects so that's why there's all of the empty holes on top. If you look at the breadboard, you'll see I just have the pots that are wired inserted in the circuit wherever needed.
So it's pretty much in and out jacks, a DC jack, and a bypass toggle switch. wires from all of these go to a terminal strip and then wires to the breadboard (In, Out, DC positive and negative, and one ground wire. Super simple...
Here's a close up of the in and out wires from the jacks and the ground wire coming out of the enclosure and to the terminal strip:
Here's the DC jack and wires:
And here's a smaller breadboard with a Gretsch Controfuzz PCB that's hooked up for testing:
Hope those help!
Fri Jan 12, 2018 7:08 pm