Cheap Chinese Laser Engravers are Fun



Moderator: Ghost Hip

Forum rules
The DIY forum is for personal projects (things that are not for sale, not in production), info sharing, peer to peer assistance. No backdoor spamming (DIY posts that are actually advertisements for your business). No clones of in-production pedals. If you have concerns or questions, feel free to PM admin. Thanks so much!

Cheap Chinese Laser Engravers are Fun

Postby culturejam » Tue Aug 29, 2017 9:25 pm

Been having fun with an Eleksmaker A5 laser engraver. You can get these on various Chinese sites (BangGood, DealBest, etc) for about $150 - $175 if you get a coupon code. I went with the 2.5W laser head, but there are several options for wattage.

I mainly got it to see if I could make it useful for engraving powdercoated pedal boxes. I'm glad to report that it works pretty well for that application. :joy:

A couple passes gets it down 95% of the way to the bare metal. And then some 90% isopropyl and a toothbrush gets you another 4%. There a tiny bit of material left over which requires some scraping (dental pick) to remove, but it also kind a looks cool as is (sort of "relic" or oxidized).

There's still some work left to do to get the process optimized and tightened up, but I'm really pleased with the results so far.

Some pics:

Laser in action (here I was testing the feasibility of cutting through painter's tape on a bare box to use as a paint mask):

Image


Powdercoated box, fresh off the laser (no cleanup):

Image


Same box, after cleanup (took about 5 minutes):

Image
Disclaimer #1: Co-Founder, Product Developer at Function f(x).
Disclaimer #3: I do sporadic, infrequent contract work for Black Arts Toneworks
Check out my photo gear on the cheap site: Tight Camera
culturejam

User avatar
Supporter
Supporter
 
Posts: 2378
Joined: Sun Jun 28, 2009 5:25 pm
Location: Nueva Yersey

Re: Cheap Chinese Laser Engravers are Fun

Postby Chankgeez » Tue Aug 29, 2017 9:36 pm

Looks pretty good.

I would worry about that last 1%. Adds charm. :cool:
psychic vampire. wrote:The important take away from this thread: Taoism and Ring Modulators go together?
…...........................…
Sweet dealin's: here
"Now, of course, Strega is not a Minimoog… and I am not Sun Ra" - dude from MAKENOISE
#GreenRinger
Chankgeez

User avatar
IAMILFFAMOUS
IAMILFFAMOUS
 
Posts: 41852
Joined: Tue Oct 11, 2011 1:40 am
Location: https://www.youtube.com/watch?v=FGhbeHujNZQ youtube.com/watch?v=V-2l7kkBURc

Re: Cheap Chinese Laser Engravers are Fun

Postby BetterOffShred » Wed Aug 30, 2017 12:37 pm

culturejam wrote:There a tiny bit of material left over which requires some scraping (dental pick) to remove, but it also kind a looks cool as is (sort of "relic" or oxidized).

I think it looks dope man. That's a pretty sweet setup!
BetterOffShred

User avatar
IAMILFFAMOUS
IAMILFFAMOUS
 
Posts: 3413
Joined: Thu Aug 17, 2017 2:01 pm

Re: Cheap Chinese Laser Engravers are Fun

Postby MechaGodzilla » Wed Aug 30, 2017 12:53 pm

:drool: :love:
MechaGodzilla

User avatar
IAMILF
IAMILF
 
Posts: 2412
Joined: Wed Jun 26, 2013 11:19 am

Re: Cheap Chinese Laser Engravers are Fun

Postby multi_s » Wed Aug 30, 2017 2:09 pm

nice.

my friend use one of these style deals to try the inverse, curing powder to the point that its tacky, blowing off the excess uncured powder, then heating the whole case up to set what remains (the text etc).
multi_s

User avatar
IAMILF
IAMILF
 
Posts: 2087
Joined: Mon Feb 15, 2010 9:00 pm

Re: Cheap Chinese Laser Engravers are Fun

Postby culturejam » Wed Aug 30, 2017 3:55 pm

multi_s wrote:nice.

my friend use one of these style deals to try the inverse, curing powder to the point that its tacky, blowing off the excess uncured powder, then heating the whole case up to set what remains (the text etc).

Now *that* is an interesting idea. :thumb:

Does it actually work?
Disclaimer #1: Co-Founder, Product Developer at Function f(x).
Disclaimer #3: I do sporadic, infrequent contract work for Black Arts Toneworks
Check out my photo gear on the cheap site: Tight Camera
culturejam

User avatar
Supporter
Supporter
 
Posts: 2378
Joined: Sun Jun 28, 2009 5:25 pm
Location: Nueva Yersey

Re: Cheap Chinese Laser Engravers are Fun

Postby multi_s » Wed Aug 30, 2017 5:29 pm

according to him it works but im not sure how long you need to heat the powder for it to cure, you would probably have to experiment. he was using 1.5watt laser though iirc so same ballpark as you. i mean if you can blast off teh powder than you should have more than enough power to partially cure it imho.


crudely the same concept as a laser printer though no? (:
multi_s

User avatar
IAMILF
IAMILF
 
Posts: 2087
Joined: Mon Feb 15, 2010 9:00 pm

Re: Cheap Chinese Laser Engravers are Fun

Postby culturejam » Wed Aug 30, 2017 7:19 pm

multi_s wrote:crudely the same concept as a laser printer though no? (:

Yeah, definitely. My biggest concern would be how to handle keeping the powder on the enclosure while etching. Usually you want to have "air assist" (ie, some kind of positive pressure air flowing across the etching surface) and that might move the powder.
Disclaimer #1: Co-Founder, Product Developer at Function f(x).
Disclaimer #3: I do sporadic, infrequent contract work for Black Arts Toneworks
Check out my photo gear on the cheap site: Tight Camera
culturejam

User avatar
Supporter
Supporter
 
Posts: 2378
Joined: Sun Jun 28, 2009 5:25 pm
Location: Nueva Yersey

Re: Cheap Chinese Laser Engravers are Fun

Postby multi_s » Thu Aug 31, 2017 4:47 pm

ya good point but my guess is you only need a low power density on the paint to cure it somewhat, so air assist is not an issue really. from what i understand air assist is a means to get a bit more out of your laser and or get cleaner crisper edges when cutting dense materials like steel etc/ longer laser life due to more efficient use of power etc etc... definitely not an expert though.

i will see if he has any pictures of his results though and post them here.
multi_s

User avatar
IAMILF
IAMILF
 
Posts: 2087
Joined: Mon Feb 15, 2010 9:00 pm

Re: Cheap Chinese Laser Engravers are Fun

Postby culturejam » Thu Aug 31, 2017 5:10 pm

Air assist clears the smoke out of the way so it doesn't block/diffuse the laser beam. It also helps with cooling the substrate so it doesn't catch on fire.
Disclaimer #1: Co-Founder, Product Developer at Function f(x).
Disclaimer #3: I do sporadic, infrequent contract work for Black Arts Toneworks
Check out my photo gear on the cheap site: Tight Camera
culturejam

User avatar
Supporter
Supporter
 
Posts: 2378
Joined: Sun Jun 28, 2009 5:25 pm
Location: Nueva Yersey

Re: Cheap Chinese Laser Engravers are Fun

Postby multi_s » Thu Aug 31, 2017 11:58 pm

ah i was imagining more like nitrogen injected at the laser beam to help cut steel plate or qqc when you said "air assist". like they are talking about here:

http://www.thefabricator.com/article/la ... er-cutting
multi_s

User avatar
IAMILF
IAMILF
 
Posts: 2087
Joined: Mon Feb 15, 2010 9:00 pm

Re: Cheap Chinese Laser Engravers are Fun

Postby culturejam » Fri Sep 01, 2017 12:11 am

At the hobby level, it's really just an air pump or fan that keeps the temp down and smoke clear. It might mean something different on an industrial level.
Disclaimer #1: Co-Founder, Product Developer at Function f(x).
Disclaimer #3: I do sporadic, infrequent contract work for Black Arts Toneworks
Check out my photo gear on the cheap site: Tight Camera
culturejam

User avatar
Supporter
Supporter
 
Posts: 2378
Joined: Sun Jun 28, 2009 5:25 pm
Location: Nueva Yersey

Re: Cheap Chinese Laser Engravers are Fun

Postby Dr. Sherman Sticks M.D. » Fri Sep 01, 2017 12:28 am

man this looks so cool. pardon my newb but what type of software do u use for something like this?
for making the designs and for "transferring" them (sorry can't think of the right phrasing right now)
is it vectors? like illustrator or more like cad?
Dr. Sherman Sticks M.D.

User avatar
IAMILFFAMOUS
IAMILFFAMOUS
 
Posts: 4045
Joined: Tue Aug 28, 2007 8:01 pm
Location: rochester, ny

Re: Cheap Chinese Laser Engravers are Fun

Postby culturejam » Fri Sep 01, 2017 12:36 am

Dr. Sherman Sticks M.D. wrote:man this looks so cool. pardon my newb but what type of software do u use for something like this?
for making the designs and for "transferring" them (sorry can't think of the right phrasing right now)
is it vectors? like illustrator or more like cad?

Yeah, basically Illustrator or InkScape or whatever does vector art. But you can also do photo etching, but it takes a bit more setup. Still working that out, but I have other people do amazing stuff that is photo quality. But like, not on pedal boxes. On wood and slate and whatnot.
Disclaimer #1: Co-Founder, Product Developer at Function f(x).
Disclaimer #3: I do sporadic, infrequent contract work for Black Arts Toneworks
Check out my photo gear on the cheap site: Tight Camera
culturejam

User avatar
Supporter
Supporter
 
Posts: 2378
Joined: Sun Jun 28, 2009 5:25 pm
Location: Nueva Yersey

Re: Cheap Chinese Laser Engravers are Fun

Postby Dr. Sherman Sticks M.D. » Fri Sep 01, 2017 12:55 am

awesome i can get by on illustrator

so then like how do u get your designs from the vector art to the engraver?
Dr. Sherman Sticks M.D.

User avatar
IAMILFFAMOUS
IAMILFFAMOUS
 
Posts: 4045
Joined: Tue Aug 28, 2007 8:01 pm
Location: rochester, ny

Next

Return to DIY Effects



Who is online

Users browsing this forum: No registered users and 2 guests


Sponsored Ad. (Please no inflated/repetitive clicking. Thanks!)



ilovefuzz.com is not responsible for user-submitted content. Users participate at their own discretion and risk.