Dunn Deciever with a True Bypass Board Question



Moderators: Ghost Hip, Gunner Recall, metalmariachi

Forum rules
The DIY forum is for personal projects (things that are not for sale, not in production), info sharing, peer to peer assistance. No backdoor spamming (DIY posts that are actually advertisements for your business). No clones of in-production pedals. If you have concerns or questions, feel free to PM admin. Thanks so much!

Dunn Deciever with a True Bypass Board Question

Postby Nateispro » Wed Jul 19, 2017 12:14 am

Hey guys! I snagged a few of the b stock Dunn Deciever PCB's he was selling and I just had a couple questions. I plan on using a daughter board for the bypass and footswitch. The deciever has a In, LED, Ground, and Out pad at the bottom, I assume these will hook up to my daughter boards equivilant pad? If thats correct will the LED just be bridged between the two boards? I can link to each board if that'll help. Thanks guy!
Turn Up Tune Down Rock Out

Good deals: Holy Schnikes
Nateispro

User avatar
committed
committed
 
Posts: 113
Joined: Sat Nov 15, 2014 2:14 am
Location: Ut

Re: Dunn Deciever with a True Bypass Board Question

Postby crochambeau » Wed Jul 19, 2017 2:21 pm

If there's a dropping resistor feeding the LED pad on the main PCB, and the footswitch leg of the daughterboard simply connects to ground when effect is engaged then yes, you could theoretically stick one leg of the LED (observe polarity) on the effect PCB and the other on the daughterboard.

I'd want to confirm those states with a multimeter before assembly.
crochambeau

User avatar
FAMOUS
FAMOUS
 
Posts: 1232
Joined: Mon Jul 20, 2015 12:49 pm
Location: Cascadia


Return to DIY Effects



Who is online

Users browsing this forum: No registered users and 7 guests


Sponsored Ad. (Please no inflated/repetitive clicking. Thanks!)

Advertisements help support ILF


ilovefuzz.com is not responsible for user-submitted content. Users participate at their own discretion and risk.