Acid Etching????



Moderators: Ghost Hip, Gunner Recall, metalmariachi

Forum rules
The DIY forum is for personal projects (things that are not for sale, not in production), info sharing, peer to peer assistance. No backdoor spamming (DIY posts that are actually advertisements for your business). No clones of in-production pedals. If you have concerns or questions, feel free to PM admin. Thanks so much!

Re: Acid Etching????

Postby dminner » Fri Dec 23, 2016 11:35 am

Since you mention hating all papers...I just have to say...I use paper from Meijer. I have from the beginning and I don't think i have ever had a bad transfer. I tape it in place. Put my iron on the hottest setting and then just set it on the transfer for one minute. After that I go aro d in small circles for about 2-3 minutes. After that, I let it cool for about 10min and then get it wet. It peels off easier and doesn't remove any transfer then. Getting it wet is key for me.

None of this really applies to him since he is painting on his masks. I just wanted to chime in since I always read about people hating paper and I have never had a issue with this approach. It is almost effortless to get a good transfer like this.
My pedals: facebook.com/ADDpedals
dminner

experienced
experienced
 
Posts: 830
Joined: Fri Jan 09, 2015 2:11 pm

Re: Acid Etching????

Postby Jesus Was a Robot » Fri Dec 23, 2016 11:43 am

dminner wrote:Since you mention hating all papers...I just have to say...I use paper from Meijer. I have from the beginning and I don't think i have ever had a bad transfer. I tape it in place. Put my iron on the hottest setting and then just set it on the transfer for one minute. After that I go aro d in small circles for about 2-3 minutes. After that, I let it cool for about 10min and then get it wet. It peels off easier and doesn't remove any transfer then. Getting it wet is key for me.

None of this really applies to him since he is painting on his masks. I just wanted to chime in since I always read about people hating paper and I have never had a issue with this approach. It is almost effortless to get a good transfer like this.


Awesome! I'll try it!

I know he's painting on now, but we all know how that goes! LOL! I started that way as well and quickly got bored and started doing transfers.
"My boner"

-Jwar

"You may caress my harem of large velvety hammers any time".

- The Velvet Hammer

"#I'mwithJwar"

-D.O.S.

"Also this thread is now on page 2399, and the pt2399 is the most used delay chip for most dirty delays. Coincidence? therefore 9/11".

-multi_s

"The only thing I can muster after reading this thread:

Thanks Obama"

-raj007
Jesus Was a Robot

User avatar
Supporter
Supporter
 
Posts: 15577
Joined: Thu Dec 02, 2010 7:18 pm
Location: Inside your mother

Re: Acid Etching????

Postby Jesus Was a Robot » Fri Dec 23, 2016 11:44 am

Wait...that's a store right? Can you tell me the exact kind you use? I've been searching for a good one now for almost a year and a half. Sigh.
"My boner"

-Jwar

"You may caress my harem of large velvety hammers any time".

- The Velvet Hammer

"#I'mwithJwar"

-D.O.S.

"Also this thread is now on page 2399, and the pt2399 is the most used delay chip for most dirty delays. Coincidence? therefore 9/11".

-multi_s

"The only thing I can muster after reading this thread:

Thanks Obama"

-raj007
Jesus Was a Robot

User avatar
Supporter
Supporter
 
Posts: 15577
Joined: Thu Dec 02, 2010 7:18 pm
Location: Inside your mother

Re: Acid Etching????

Postby dminner » Fri Dec 23, 2016 11:49 am

Yeah it is like a Walmart. This is what I use: https://www.amazon.com/Printworks-Photo ... B00005ATX8

It is gloss not even high gloss. It is half the price at the store though and they have buy one get one free lots of times.
My pedals: facebook.com/ADDpedals
dminner

experienced
experienced
 
Posts: 830
Joined: Fri Jan 09, 2015 2:11 pm

Re: Acid Etching????

Postby Jesus Was a Robot » Fri Dec 23, 2016 11:51 am

Order a pack to try! Thanks!
"My boner"

-Jwar

"You may caress my harem of large velvety hammers any time".

- The Velvet Hammer

"#I'mwithJwar"

-D.O.S.

"Also this thread is now on page 2399, and the pt2399 is the most used delay chip for most dirty delays. Coincidence? therefore 9/11".

-multi_s

"The only thing I can muster after reading this thread:

Thanks Obama"

-raj007
Jesus Was a Robot

User avatar
Supporter
Supporter
 
Posts: 15577
Joined: Thu Dec 02, 2010 7:18 pm
Location: Inside your mother

Re: Acid Etching????

Postby cherler » Fri Dec 23, 2016 11:56 am

Yay everyone showed up! :!!!:

Thanks for the info jwar, I've actually watched your videos. They're what got me to finally just give it a go so thanks! I am interested in the toner transfer, I'm probably gonna give it a shot at some point. And thanks for the paper suggesting dminner, I'll totally try it with that.

I really like the painting as of now though for this kind of brush artifact in this etch. Even just the littlest lines of paint held up during the etch and came up textured. I absolutely love it. I wanna learn how to draw kanji and shit and just have aluminum brush strokes on pedals.

Image
Instagram yo

Good dealin's: D.o.S.
cherler

User avatar
committed
committed
 
Posts: 459
Joined: Tue Oct 06, 2015 4:48 pm
Location: Manchvegas

Re: Acid Etching????

Postby jrfox92 » Thu Dec 29, 2016 1:16 am

Holy shit, that brush finish looks nice.
I really need to get around to doing etchings. So far, I've just been doing faux screen prints by cutting painters tape and spray painting, kinda curious how that'd look for etches, too.
Since I always forget:

Inconuucl wrote:You can't kill Strymon, it'll just resurrect 3 days later.

BitchPudding wrote:Despite all my rage, I am still just eating tacos in a cage.
jrfox92

User avatar
IAMILFFAMOUS
IAMILFFAMOUS
 
Posts: 3436
Joined: Sun Jun 22, 2014 11:23 am
Location: Akron, Ohio

Re: Acid Etching????

Postby cherler » Thu Dec 29, 2016 1:15 pm

Thanks! I've used painters tape on the sides of pedals like jwar mentioned before and it holds up fine. I bet you could use that as a mask.
Instagram yo

Good dealin's: D.o.S.
cherler

User avatar
committed
committed
 
Posts: 459
Joined: Tue Oct 06, 2015 4:48 pm
Location: Manchvegas

Re: Acid Etching????

Postby Chankgeez » Thu Dec 29, 2016 1:26 pm

Yeah, that definitely looks fantastic! :!!!: :)*
Alice: balls have a ball to me to me to me to me to me to me to me to me
"You can't copyright circuits really." - Ed Sanner …………….0.............
"The effects market was really nothing more than a bunch of beggars and theives, all building off one another's work." - Dan Armstrong…...........................…
Sweet dealin's: here

"Flangers gonna Flange, though. There's no way around that." - Joel Korte
Chankgeez

User avatar
IAMILFFAMOUS
IAMILFFAMOUS
 
Posts: 30947
Joined: Tue Oct 11, 2011 1:40 am

Previous

Return to DIY Effects



Who is online

Users browsing this forum: No registered users and 3 guests


Sponsored Ad. (Please no inflated/repetitive clicking. Thanks!)

Advertisements help support ILF


ilovefuzz.com is not responsible for user-submitted content. Users participate at their own discretion and risk.