Let's see your finished DIY projects!



Moderator: Ghost Hip

Forum rules
The DIY forum is for personal projects (things that are not for sale, not in production), info sharing, peer to peer assistance. No backdoor spamming (DIY posts that are actually advertisements for your business). No clones of in-production pedals. If you have concerns or questions, feel free to PM admin. Thanks so much!

Re: Let's see your finished DIY projects!

Postby Dr. Sherman Sticks M.D. » Thu Jul 26, 2018 12:08 am

2018-07-25 23.37.12.jpg
2018-07-25 23.37.12.jpg (307.44 KiB) Viewed 978 times

installed a SCSI expansion board and SCSI2SD drive in my MPC60 tonight
took me a minute to get everything communicating but wasn't too bad
woooooooo saving and loading is way faster than the floppy emulator that i have in there also.
:animal:
Dr. Sherman Sticks M.D.

User avatar
IAMILFFAMOUS
IAMILFFAMOUS
 
Posts: 3953
Joined: Tue Aug 28, 2007 8:01 pm
Location: rochester, ny

Re: Let's see your finished DIY projects!

Postby spacelordmother » Thu Jul 26, 2018 5:58 am

Nice! My limited experience with scsi tells me that anything you can do to avoid it is worth it. :lol:
spacelordmother

User avatar
HERO
HERO
 
Posts: 5424
Joined: Sun May 16, 2010 4:45 pm
Location: Rochester, NY

Re: Let's see your finished DIY projects!

Postby Dr. Sherman Sticks M.D. » Thu Jul 26, 2018 10:08 am

lol yea i had no experience w/ SCSI
but the 60 is so old and the floppy is so slow that the SCSI is like actually really worthwhile

used to take like 60 seconds or so to load up 400KB(!) worth of sounds. yes KILOBYTES
now same set of sounds load up in like 5-10 seconds.
Dr. Sherman Sticks M.D.

User avatar
IAMILFFAMOUS
IAMILFFAMOUS
 
Posts: 3953
Joined: Tue Aug 28, 2007 8:01 pm
Location: rochester, ny

Re: Let's see your finished DIY projects!

Postby DRodriguez » Sun Jul 29, 2018 6:18 pm

Image
Left: Designed a dual filter from scratch. Makeup gain knob. Switch for boost, switch for filters.
Bottom right: Buffered splitter/blender/midboost on one channel. Bypass switch on the fx loop.
Top right: Rat
instagram: digitally_analog | snapchat: dave1856
DRodriguez

User avatar
IAMILFFAMOUS
IAMILFFAMOUS
 
Posts: 3467
Joined: Thu Apr 09, 2015 1:40 pm
Location: Brooklyn

Re: Let's see your finished DIY projects!

Postby AZX309 » Wed Aug 01, 2018 9:18 pm

DRodriguez wrote:Image
Left: Designed a dual filter from scratch. Makeup gain knob. Switch for boost, switch for filters.
Bottom right: Buffered splitter/blender/midboost on one channel. Bypass switch on the fx loop.
Top right: Rat


i only see good things here.

what kind of architecture did you chose for the filter?
https://www.instagram.com/azx309/
D.o.S. wrote:you're not my real dad

Corey Y wrote: Tone is in the dingus.
AZX309

User avatar
committed
committed
 
Posts: 379
Joined: Thu Apr 09, 2015 10:59 pm

Re: Let's see your finished DIY projects!

Postby DRodriguez » Thu Aug 02, 2018 1:40 am

They are sallen-key active filters. I'll post the schem and vero layout of the filter/boost when I get back to home.
instagram: digitally_analog | snapchat: dave1856
DRodriguez

User avatar
IAMILFFAMOUS
IAMILFFAMOUS
 
Posts: 3467
Joined: Thu Apr 09, 2015 1:40 pm
Location: Brooklyn

Re: Let's see your finished DIY projects!

Postby frodog » Fri Aug 10, 2018 12:22 am

needed a small buffered splitter

buff_split.JPG
frodog

User avatar
FAMOUS
FAMOUS
 
Posts: 1026
Joined: Fri Aug 28, 2015 2:55 pm
Location: the hollowed out chest of a dead horse

Re: Let's see your finished DIY projects!

Postby Ben79 » Sat Aug 25, 2018 4:14 pm

Repeat Percussion and modified si Fuzz Face. Fuzz engages on the push/pull bias pot. Some ticking comes through when it's fuzz only and the RP gets unstable when the rate pot nears maximum on either speed setting. Ticking goes away if you turn the rate down.

NSFW: show
Image

Image
Ben79

User avatar
committed
committed
 
Posts: 482
Joined: Thu Nov 01, 2012 6:16 pm
Location: France

Re: Let's see your finished DIY projects!

Postby Dr. Sherman Sticks M.D. » Sat Aug 25, 2018 4:18 pm

sweet graphic!
Dr. Sherman Sticks M.D.

User avatar
IAMILFFAMOUS
IAMILFFAMOUS
 
Posts: 3953
Joined: Tue Aug 28, 2007 8:01 pm
Location: rochester, ny

Re: Let's see your finished DIY projects!

Postby Ben79 » Mon Aug 27, 2018 5:45 pm

Thanks, was how I was feeling at the time.
Ben79

User avatar
committed
committed
 
Posts: 482
Joined: Thu Nov 01, 2012 6:16 pm
Location: France

Re: Let's see your finished DIY projects!

Postby Dr. Sherman Sticks M.D. » Mon Aug 27, 2018 6:48 pm

sweet pedal/work too! but i thought that was a given :)
Dr. Sherman Sticks M.D.

User avatar
IAMILFFAMOUS
IAMILFFAMOUS
 
Posts: 3953
Joined: Tue Aug 28, 2007 8:01 pm
Location: rochester, ny

Re: Let's see your finished DIY projects!

Postby Ben79 » Tue Aug 28, 2018 8:04 am

Thanks, it could be better - a bit of veroboard hot glued to whatever was nearby, not what I like to see in a pedal myself, but it works.

Next build will be a yellow jacket OC44 Rangemaster on tagstrip. Working on the graphic today.
Ben79

User avatar
committed
committed
 
Posts: 482
Joined: Thu Nov 01, 2012 6:16 pm
Location: France

Re: Let's see your finished DIY projects!

Postby Ben79 » Tue Sep 04, 2018 4:29 am

"Yellow Jacket" finished...

Stoked on the image transfer. I followed a tutorial on Youtube for transferring laserprint to metal using regular copy paper and polyurethane varnish - takes a while to do but works super well. I'll be doing my next few pedals this way.

Huge 0.005 input cap cos it's the only 0.005 I had and I was determined to keep it original values. Took some juggling to get it all to fit in the enclosure with that huge old Allen and Bradley pot that came out of a valve oscilloscope. I was lucky the battery just fits. Would have taken a quarter of the time to build if I'd used a PCB and small components but starting with the 60s yellow jacket OC44 this became a romantic enterprise.

Image

Image
Ben79

User avatar
committed
committed
 
Posts: 482
Joined: Thu Nov 01, 2012 6:16 pm
Location: France

Re: Let's see your finished DIY projects!

Postby BetterOffShred » Tue Sep 04, 2018 9:05 am

Yeah but it looks dope!
BetterOffShred

User avatar
IAMILF
IAMILF
 
Posts: 2595
Joined: Thu Aug 17, 2017 2:01 pm

Re: Let's see your finished DIY projects!

Postby frodog » Thu Sep 06, 2018 1:27 pm

Props to Tom, I did a clone of his Phantom Octave (with a Parasit Studio relay bypass board). Not the cleanest build inside, but works and sounds good, a responsive and versatile octave fuzz.

Pre-painted enclosure (graphics tbd), Lego LED lens, side volume knob.

phantom_oct.JPG


phantom_guts.JPG
frodog

User avatar
FAMOUS
FAMOUS
 
Posts: 1026
Joined: Fri Aug 28, 2015 2:55 pm
Location: the hollowed out chest of a dead horse

PreviousNext

Return to DIY Effects



Who is online

Users browsing this forum: No registered users and 2 guests


Sponsored Ad. (Please no inflated/repetitive clicking. Thanks!)

Advertisements help support ILF


ilovefuzz.com is not responsible for user-submitted content. Users participate at their own discretion and risk.