DIY Cab progress/ suggestions

[JonnyAngle]

Got a peavey bandit 112 circa 1998 and bought an extension speaker for $25. I need to make a box to put it in.

I'm getting the plans for an open back, light design. Anything else I should add?

[JonnyAngle]

This is the style bandit I have.

I'll be putting the amp on top of the extension speaker, so I'm thinking about a slanted baffle internally, and the grille cloth would look straight (depiction B).

Or should I just do regular? (depiction A)

Untitled.png (12.14 KiB) Viewed 1429 times

[crochambeau]

If you go version B I'd be tempted to work a scooped horn into it, but I like horns and they really don't lend themselves to compact or lightweight. Maybe have an option to go closed back with a transmission line feeding a rectangular port on the bottom of the slanted baffle?

I'm starting to think weird thoughts, I'll just shut up now.

[Muff_Diver]

Id just buy another bandit tbh. You can easily spend more than what they cost on building your own cab.

[JonnyAngle]

If you go version B I'd be tempted to work a scooped horn into it, but I like horns and they really don't lend themselves to compact or lightweight. Maybe have an option to go closed back with a transmission line feeding a rectangular port on the bottom of the slanted baffle?

I'm starting to think weird thoughts, I'll just shut up now.

Horns are not within my expertise and weight is prob no1 factor I'm keeping in mind

THe bandit is open back and I don't want to mess with the ts parameters of the driver I have to make a closed back.

Id just buy another bandit tbh. You can easily spend more than what they cost on building your own cab.

I neglected to mention that I have access to free wood and my time is worthless for this cab

[JonnyAngle]

Well based on my "craftsmanship" I'm going with this!

Capture.JPG (23.24 KiB) Viewed 1404 times

23-1/8 x 19 x 11

[JonnyAngle]

I'm staining the outside right now. I had some grille cloth somewhere, but can't find it. I'm staining the wood black, and then doing a clear gloss over it.

Do I need legit speaker cloth, or will any woven fabric work?

[JonnyAngle]

IMG_3673.JPG (49.66 KiB) Viewed 1356 times

It's pretty humid so we might need a few days to dry

[JonnyAngle]

IMG_3676.JPG (53.07 KiB) Viewed 1350 times

Codetocontra: dual revolvers on auto into a dual bandit 112

[JonnyAngle]

Just need to wire it up

IMG_3686.JPG (47.34 KiB) Viewed 1326 times

[Jwar]

Give me your other cab.

[DRodriguez]

And an amp that doesn't blow

[Jwar]

My amp actually is working fine. Turns out that I mismatched the impedance and that's what blew my cab. Mesa told me if you're hooking to a 8 ohm cab you'll need to turn the amp on full power or plug it into the 4ohm out because it multiples the output by 2. I did not know that. I've always used two cabs. LOL. So it was my fault this one fucking time.

[JonnyAngle]

That's good. So your cab is the only part that's bad?

[Jwar]

Currently! LOL!