The BitQuest User Settings Thread



Moderator: Ryan

Re: The BitQuest User Settings Thread

Postby resincum » Sun Apr 03, 2016 12:52 pm

goroth wrote:RRR is really, really good. But the sounds are straight from the chip. The reverb in the BQ is directly from Ryan's brain.

With the tone knob and the predelay you can pretty much make it sound like anything though. The BQ that is.
But there is definitely room in life for both. RRR pre dirt, BQ post.

what do you mean already on the chip? what kind of chip does the RRR use? good to know! makes me appreciate the bq verb that much more.

flanger: I put ctrl 1 at like 10 (anymore left and it's too slow or something/won't swoosh), ctrl 2 around 1/2 with ctrl 0 to taste. full left or right is usually too dramatic so I put it somewhere between. tone full bright and there's definitely some swoosh
Image
TOO MANY OF US//STAR EATER///RESIN CUM///VISUALS
i'm glad i can call you a friend. even if i'll never see you again
Image
resincum

User avatar
Supporter
Supporter
 
Posts: 3313
Joined: Fri Oct 24, 2014 12:30 am
Location: el paso

Re: The BitQuest User Settings Thread

Postby SonicReducer » Tue May 10, 2016 9:45 pm

A question about the NOTCH FILTER effect... it says in the instructions that it works as a phaser, but I have found it to be an excellent treble-boost effect to use after a fuzz..it seems to boot the signal to a louder, more compressed and trebly sound, aslmost metallic. Chords just become massive with this setting... is this how the effect is supposed to work?
SonicReducer

interested
interested
 
Posts: 47
Joined: Fri Mar 04, 2016 6:56 pm

Re: The BitQuest User Settings Thread

Postby goroth » Wed May 11, 2016 1:49 am

resincum wrote:
goroth wrote:RRR is really, really good. But the sounds are straight from the chip. The reverb in the BQ is directly from Ryan's brain.

With the tone knob and the predelay you can pretty much make it sound like anything though. The BQ that is.
But there is definitely room in life for both. RRR pre dirt, BQ post.

what do you mean already on the chip? what kind of chip does the RRR use? good to know! makes me appreciate the bq verb that much more.

flanger: I put ctrl 1 at like 10 (anymore left and it's too slow or something/won't swoosh), ctrl 2 around 1/2 with ctrl 0 to taste. full left or right is usually too dramatic so I put it somewhere between. tone full bright and there's definitely some swoosh

Yeah, the RRR uses a wavefront chip that is hard coded by the designer. Same dude who did the spin as well.
JonnyAngle wrote:Vidret took the spin chip from his pretty years and put it in his bitquest

Demos /// My band /// Instagram ///Facebook ///
goroth

User avatar
HERO
HERO
 
Posts: 10153
Joined: Wed Jan 25, 2012 3:50 am
Location: Eurothrash: Frozen northern outpost.

Re: The BitQuest User Settings Thread

Postby SonicReducer » Wed May 11, 2016 7:03 am

brak purp wrote:
goroth wrote:This is a serious question: has anyone done anything cool with the notch filter?


I started using both the Notch filter and the HP LP Filter quests much more once I started feeding them really ugly bright sounds.

First I cranked the tone knob on a big muff and used the notch filter to make it sound good and balanced again, then I used the strangle switch on my Jaguar to cut all the bass and unclutter all that the filter and bit crush quests had going on.


Yeah I've been doing the same, it almost seems like a treble/volume boost, a BigMuff just becomes MASSIVE with the notch filter, and the instructions says it's a 'phaser' or something???
SonicReducer

interested
interested
 
Posts: 47
Joined: Fri Mar 04, 2016 6:56 pm

Re: The BitQuest User Settings Thread

Postby Clean Channel » Wed May 11, 2016 11:42 am

Re notch filter: It only sounds like a phaser when you use it with the expression pedal.

The notch filter cuts a narrow band out of your EQ, kinda the opposite of what a wah does (sharp spike in EQ). They can be handy for cutting out a frequency that's causing feedback with acoustic instruments.

The expression pedal lets you run the notch back and forth across the EQ range, which does give a very cool manual phaser sound.
Clean Channel

User avatar
Supporter
Supporter
 
Posts: 752
Joined: Sun Dec 26, 2010 10:03 am
Location: Canada

Re: The BitQuest User Settings Thread

Postby vidret » Mon May 16, 2016 7:42 pm

wish the notch filter would be lfo instead of envelope. i don't hear much, i guess i could put it in the fx loop but i want it in front of the amp.
vidret

User avatar
IAMILFFAMOUS
IAMILFFAMOUS
 
Posts: 5370
Joined: Fri Oct 21, 2011 5:55 pm
Location: Skogen

Re: The BitQuest User Settings Thread

Postby vidret » Mon Jul 18, 2016 3:51 pm

for anyone cruising about, just wanted to give a mention to the ILF mausoleum series (:lol: )

in the second part of my set that starts at 7:40ish i used a vl-tone (5?) with a bitquest set to pitch an octave up/down.

vidret

User avatar
IAMILFFAMOUS
IAMILFFAMOUS
 
Posts: 5370
Joined: Fri Oct 21, 2011 5:55 pm
Location: Skogen

Re: The BitQuest User Settings Thread

Postby magellan » Fri Nov 11, 2016 3:13 pm

IS there not a pdf manual for this pedal?
magellan

User avatar
interested
interested
 
Posts: 29
Joined: Mon May 12, 2014 5:56 pm

Re: The BitQuest User Settings Thread

Postby Clean Channel » Fri Nov 11, 2016 3:36 pm

magellan wrote:IS there not a pdf manual for this pedal?


Yep, there are two: Quick Guide and Full Instructions.
Clean Channel

User avatar
Supporter
Supporter
 
Posts: 752
Joined: Sun Dec 26, 2010 10:03 am
Location: Canada

Re: The BitQuest User Settings Thread

Postby jan » Fri Nov 25, 2016 10:33 pm

Got one recently and love it. Mostly use the reverb, ring mod, delay and bit crusher.
jan

interested
interested
 
Posts: 17
Joined: Sun May 31, 2009 12:47 am

Re: The BitQuest User Settings Thread

Postby njschneider2 » Wed Feb 01, 2017 2:49 pm

Here's a setting for a whammy-like ring mod. I'll try to post a clip of it later, but I highly recommend this setting!

Image
njschneider2

User avatar
interested
interested
 
Posts: 31
Joined: Thu Aug 25, 2016 12:21 pm

Previous

Return to Dr. Scientist



Who is online

Users browsing this forum: No registered users and 1 guest


Sponsored Ad. (Please no inflated/repetitive clicking. Thanks!)

Advertisements help support ILF


ilovefuzz.com is not responsible for user-submitted content. Users participate at their own discretion and risk.