pedals fished from the shores of lake okanagan and flash frozen for freshness <
drscientist.ca> <
FB> <
IG>
Tue Jan 08, 2013 9:10 pm
Does the CCv3 hum with the Jr? I'd expect it to since it needs 125mA.. I think that's why the RRR hums with it, not enough current...
Tue Jan 08, 2013 9:13 pm
The RRR hums when on when the CCv3 is in the chain but all pedals work.
Tue Jan 08, 2013 9:20 pm
Geez RRRs are touchy! Still surprised the Jr. can handle the Cosmi too... I'll let you know if the Isolator Adapter works!
Thu Jan 10, 2013 6:53 am
Yes tell us when that arrives, Im curious about that one. For now I just use a different adapter for the Reverberator.
Thu Jan 10, 2013 7:15 am
No hum or hiss with either my RRR or CCv3 off my Fuel Tank Jr.
Fri Jan 11, 2013 9:48 am
Just got an RRR for the first time. I plugged it in using a strymon power supply that comes with the Timeline, Mobius, etc. which is supposed to be 1000 mA. It works great with other pedals but it does seem cheap compared to something like a OneSpot.
Anyway, lots of noise with the RRR (and a bit of noise if I use it with the Cosmichorus). The Cosmichorus is silent on a PP2+ so I suspect when I get time to plug the RRR into that as well it will be fine.
Fri Jan 11, 2013 6:33 pm
yallerhon wrote:No hum or hiss with either my RRR or CCv3 off my Fuel Tank Jr. :)
Cool! Is it a hard-click RRR?
jmoote wrote:Just got an RRR for the first time. I plugged it in using a strymon power supply that comes with the Timeline, Mobius, etc. which is supposed to be 1000 mA. It works great with other pedals but it does seem cheap compared to something like a OneSpot.
Anyway, lots of noise with the RRR (and a bit of noise if I use it with the Cosmichorus). The Cosmichorus is silent on a PP2+ so I suspect when I get time to plug the RRR into that as well it will be fine.
When a company gives you a power supply it's because it costs them basically nothing, is almost always unregulated and unfiltered, and it means that their pedal is probably internally regulated/filtered in a way that it doesn't care what you plug into it. Digital pedals that digitize the whole signal can get away with this pretty easily.
The RRR is a mix of analog and digital and the digital section is spread over 3 separate chips, not the usual one big chip that does everything, and it's picky about the power that's plugged in.
Fri Jan 11, 2013 7:06 pm
Strymon claims an analog dry path, but yes I suspect there is tons of internal power regulation and filtering and all it really needs to see is the voltage with enough current and it can go from there.
Given my success with the Cosmichorus (and just about any other pedal) on the PP2+ I am not worried.
Sat Jan 12, 2013 12:34 am
Ryan wrote:yallerhon wrote:No hum or hiss with either my RRR or CCv3 off my Fuel Tank Jr.
Cool! Is it a hard-click RRR?
It's a hard-click teal on-the-airberator, part of the all-Dr-Sci board I posted on your FB wall the other day
Sun Jan 13, 2013 12:47 am
This thread is now of interest to me with my new
Red On-The-Air-beratorI've never had any problems with my
offtheAirMiniRRR (even with the new CC), so to test my new pedal I straight swapped them and the redtv was a hummer, where the offtheAirMiniRRR has never made a peep. hmm
i'm gonna run some more tests on monday after reading the details in this thread. might make it to my practice space tomorrow if time permits.
here's the board setup, with two
voodoo labs ISO5 underneath.
Sun Jan 13, 2013 1:28 am
Try running it on the 400mA output - the other four outputs only have 100mA each, and that could be your trouble.
Sun Jan 13, 2013 12:02 pm
I hated my Fuel Tank Chameleon. Beyond causing random hum issues with 9V pedals, the 18V setting would never work properly no matter what pedal we're talking.
CIOKS and Voodoo Labs if you're wanting an isolated multi-supply. That's what I'd suggest.
Oh, as for the Strymon supply, I've had many issues using it with anything other than Strymon stuff tho ymmv.
Sun Jan 13, 2013 12:31 pm
goroth wrote:Try running it on the 400mA output - the other four outputs only have 100mA each, and that could be your trouble.
the 400mA are for the eventide pedals.
I'm sure between the two ISO5 i can switch things around, run the RRR with the ODB-3 on the 9v 100mA taps.
I believe right now the RRR is on the same ISO5 as the CC, Tremolessence, WIIO (18v) & modfactor.
I'm just surprised that one miniRRR doesn't perform like another.
Sun Jan 13, 2013 6:23 pm
Kev, the difference is the red tv has a relay and a micro for the switching... it needs about 30mA more than the hard-clicker version and seems much more prone to humming. Double regulators, double micros.. it's a hummer...
Tue Jan 15, 2013 6:53 pm
Anyone tested the diago isolator yet?
Powered by phpBB © phpBB Group.
phpBB Mobile / SEO by Artodia.