Baby Thundaa Question



Moderators: aens_wife, aen

Baby Thundaa Question

Postby WeHuntKings » Fri Dec 02, 2011 4:36 pm

How hard would it be to cram another footswitch in there to engage the feedback loop? I am a total noob and have never even touched a soldering iron before. Just wondering if anyone else has done this before.
WeHuntKings

User avatar
IAMILF
IAMILF
 
Posts: 2355
Joined: Thu Oct 27, 2011 1:46 pm
Location: Atlanta, GA

Re: Baby Thundaa Question

Postby fuzzmax » Fri Dec 02, 2011 7:48 pm

another footswitch on a 125B enclosure would be pretty narrow......and you need to solder some parts onto the pcb that are left empty for the purpose of the baby thundaa. doable though!
but, why don't you buy the big ass thunder instead ????
fuzzmax

User avatar
experienced
experienced
 
Posts: 914
Joined: Tue Apr 06, 2010 7:30 am
Location: Joliette, Quebec

Re: Baby Thundaa Question

Postby aen » Fri Dec 02, 2011 7:59 pm

Impossible in an already cOmpleted BBT.
Possible but cramped for a new/custom build.
Chankgeez wrote:
DWARFCRAFT: We are not fucking around this year.
aen

User avatar
IAMILFFAMOUS
IAMILFFAMOUS
 
Posts: 4258
Joined: Sat May 19, 2007 10:34 pm

Re: Baby Thundaa Question

Postby WeHuntKings » Fri Dec 02, 2011 9:08 pm

Thanks guys. Just wondering. I think I saw a picture of someone's custom build somewhere with two footswitches. Wasn't sure if they took an existing model or built it themselves or had something custom built for them.

Cannot wait to get mine!
WeHuntKings

User avatar
IAMILF
IAMILF
 
Posts: 2355
Joined: Thu Oct 27, 2011 1:46 pm
Location: Atlanta, GA

Re: Baby Thundaa Question

Postby Bassboar » Sat Dec 03, 2011 12:15 am

I do believe your are referring to the Thundaa Prototype.
sanfordandsonny wrote:guitars are hammers if you put some electrical tape on the handle so the blood doesn't make the hammer slippery so be it.
Quando Omni Flunkus Moritati
Good deals with: Bellyheart, bronzetalon,kbithecrowning, fuzzmax, jwar, misc1600, hatshirt, colin, chippywallace, Monkey Boy, skullservant, jumbosteelie, foomanfat, sanfordandsonny, pez.period, proroby, excane
Bassboar

User avatar
FAMOUS
FAMOUS
 
Posts: 1578
Joined: Tue Sep 21, 2010 8:44 pm
Location: Jotunheim (Canada)

Re: Baby Thundaa Question

Postby bronzetalon » Sat Dec 03, 2011 2:13 pm

Why can't you just put the baby thundaa in a feed back loop like the chk chk boom...would be the same result would it not?
bronzetalon

User avatar
FAMOUS
FAMOUS
 
Posts: 1979
Joined: Sat Apr 24, 2010 5:06 pm
Location: STL

Re: Baby Thundaa Question

Postby aen » Sat Dec 03, 2011 6:28 pm

There is a toggle for the feedback loop on it. Also I would probably have to advise a Dwarfcraft Romance Explosion for feedback looping.
Chankgeez wrote:
DWARFCRAFT: We are not fucking around this year.
aen

User avatar
IAMILFFAMOUS
IAMILFFAMOUS
 
Posts: 4258
Joined: Sat May 19, 2007 10:34 pm

Re: Baby Thundaa Question

Postby fuzzmax » Sat Dec 03, 2011 6:58 pm

if you want a romance explosion, i've got one of the first edition that i could sell to you.
fuzzmax

User avatar
experienced
experienced
 
Posts: 914
Joined: Tue Apr 06, 2010 7:30 am
Location: Joliette, Quebec

Re: Baby Thundaa Question

Postby WeHuntKings » Sun Dec 04, 2011 12:43 am

Trying to flip some stuff over on craigslist in atlanta. Will let you know if it works out!

Would the feedback loop in the thundaa interact with the romance explosion?
WeHuntKings

User avatar
IAMILF
IAMILF
 
Posts: 2355
Joined: Thu Oct 27, 2011 1:46 pm
Location: Atlanta, GA

Re: Baby Thundaa Question

Postby WeHuntKings » Fri Dec 09, 2011 3:08 pm

Sorry for the double post here, but I wanted to ask another question, mainly directed at you Aen.

Have you stacked this pedal with any other high gain devices with any luck? I would try it myself but I don't have any other dirt pedals or gainy amps at the moment.
WeHuntKings

User avatar
IAMILF
IAMILF
 
Posts: 2355
Joined: Thu Oct 27, 2011 1:46 pm
Location: Atlanta, GA

Re: Baby Thundaa Question

Postby bronzetalon » Tue Dec 13, 2011 1:21 pm

aen wrote:There is a toggle for the feedback loop on it. Also I would probably have to advise a Dwarfcraft Romance Explosion for feedback looping.


Yea your right...I just think of Ohnoho when I think of feed back loopers for some reason.
bronzetalon

User avatar
FAMOUS
FAMOUS
 
Posts: 1979
Joined: Sat Apr 24, 2010 5:06 pm
Location: STL

Re: Baby Thundaa Question

Postby aen » Tue Dec 13, 2011 9:59 pm

WeHuntKings wrote:Have you stacked this pedal with any other high gain devices with any luck?


The most stacking I do with this is an Interet before it. Usually on "normal overdrive" but for feedback and noise I do the "full blast" mode on the Internet. The Thundaa circuit is so saturated that you dont hear a whole lot of difference when you have OD before it, but there is certainly a little more grit. When you have something really loud before it, it can start to "squash up" in the thundaa, but the gain and feedback are your friends :)
Chankgeez wrote:
DWARFCRAFT: We are not fucking around this year.
aen

User avatar
IAMILFFAMOUS
IAMILFFAMOUS
 
Posts: 4258
Joined: Sat May 19, 2007 10:34 pm

Re: Baby Thundaa Question

Postby Bassboar » Sat Dec 24, 2011 12:24 pm

A Dark Boost with the gain cranked up makes the Thundaa a raging fiery beast. With the feedback backed up a little bit and the gain cranked, absolutely delish.
sanfordandsonny wrote:guitars are hammers if you put some electrical tape on the handle so the blood doesn't make the hammer slippery so be it.
Quando Omni Flunkus Moritati
Good deals with: Bellyheart, bronzetalon,kbithecrowning, fuzzmax, jwar, misc1600, hatshirt, colin, chippywallace, Monkey Boy, skullservant, jumbosteelie, foomanfat, sanfordandsonny, pez.period, proroby, excane
Bassboar

User avatar
FAMOUS
FAMOUS
 
Posts: 1578
Joined: Tue Sep 21, 2010 8:44 pm
Location: Jotunheim (Canada)

Re: Baby Thundaa Question

Postby WeHuntKings » Sat Dec 24, 2011 9:11 pm

i have been looking into getting a dark boost...might have to do it now.
WeHuntKings

User avatar
IAMILF
IAMILF
 
Posts: 2355
Joined: Thu Oct 27, 2011 1:46 pm
Location: Atlanta, GA

Re: Baby Thundaa Question

Postby Wes Mantooth » Sun Dec 25, 2011 10:04 am

Depending on what I'm using it for I'll use a Sparkle Motion or a Robot Devil with normal overdrive settings in front. Both work awesome, the trim knob can make things a lot less noisy too.
Wes Mantooth

User avatar
Supporter
Supporter
 
Posts: 3643
Joined: Tue Feb 01, 2011 11:19 pm
Location: Minneapolis

Next

Return to Dwarfcraft Devices



Who is online

Users browsing this forum: No registered users and 2 guests


Sponsored Ad. (Please no inflated/repetitive clicking. Thanks!)

Advertisements help support ILF


ilovefuzz.com is not responsible for user-submitted content. Users participate at their own discretion and risk.